Search
171 articles for “cement”
-
High Strength Concrete (M40) Using Micro Silica and Steel Fiber
Abstract: Abstract: This experimental study examines the combined effects of micro silica (silica fume, SF) as a partial cement replacement and hooked-end steel fibers on the mechanical properties of M40 grade concrete. Concrete mixes were designed as per IS:10262 with a target characteristic compressive strength of 40 MPa. Silica fume was incorporated at 0%, 5%, 10%, and 12% by weight of cement, while steel fibers (aspect ratio ~50) were added at …
Published in International Journal of Construction Engineering and Planning · Vol. 12, Issue 1, 2026 · pp. 53–57 Read article
-
Literature Review on Overcoming Graphene Dispersion Challenges in Ultra High Performance Concrete: A Review of Self-Dispersion and Bio-Polymer Encapsulation Strategies
Abstract: Abstract—Ultra-High-Performance Concrete (UHPC) is a new generation of cement-based material because of its higher compressive and tensile strength, increased durability, and higher resistance to environmental degradation. However, UHPC undergoes microcracking when subjected to mechanical and thermal loading, which can jeopardize the long-term performance of the structure, decrease service life, and cause expensive maintenance. Traditional solutions to enhance UHPC durability are centered on material densification and fiber strengthening, while these treatments …
Published in International Journal of Concrete Technology · Vol. 12, Issue 1, 2026 · pp. 31–46 Read article
-
Sustainability Assessment and Life Cycle Analysis of Conventional Concrete and Rice Husk Ash based Concrete
Abstract: Abstract With the boom in construction industry, demand for sustainable construction materials have come into a high demand. Compared to traditional construction materials, which caused enhanced pollution to the environment, new-age industry is more focussed on adopting sophisticated, innovative and sustainable building processes, materials and products. Concrete is the most widely used construction material globally, but its environmental burden—particularly from Portland cement production—contributes significantly to greenhouse gas emissions, energy use, …
Published in International Journal of Concrete Technology · Vol. 12, Issue 1, 2026 · pp. 16–24 Read article
-
Numerical Investigation of Hybrid Composite Armors: Cost-Effective Solutions for Ballistic ProtectionUsing ANSYS
Abstract: This study presents a detailed numerical investigation of hybrid composite armors as a cost-effective and lightweight solution for ballistic protection. With increasing the demand of protective systems that ensure high mobility with light weight and cost-effective armor without compromising safety. Traditional steel armor has already proven to be a reliable protection system but the main problem is its mobility. To address this issue, the work focuses on composite material as …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 11, Issue 2, 2025 · pp. 1–11 Read article
-
The Effect of Sugar Powder on Strength of Concrete
Abstract: Abstract This study presents a comprehensive experimental investigation into the influence of sugar powder on the compressive strength of concrete. The research aims to systematically evaluate the effects of incorporating sugar powder in varying proportions on the mechanical and structural performance of concrete, particularly when combined with different brands of cement. Concrete cube specimens with standard dimensions of 150 mm × 150 mm × 150 mm were meticulously prepared by …
Published in International Journal of Concrete Technology · Vol. 11, Issue 1, 2025 · pp. 22–28 Read article
-
Synthesis and characterization of high saline water resistant sulphur composite from petrochemical waste
Abstract: Petrochemical industry produces variety of side products and waste materials like sulphur, spent catalysts, spent adsorbents, etc. These waste materials can be converted to the value-added products by forming their composites with unique properties. For example, sulphur due to its chemical properties like high resistivity to corrosive environment, hydrophobic nature, antifungal property, its composite can be prepared and used in construction industries as a substitute for cement composite material. To …
Published in International Journal of Green Chemistry · Vol. 6, Issue 2, 2020 · pp. 64–77 Read article
-
To Study Mechanical Properties of Concrete by Using Industrial Waste Material
Abstract: Concrete is a very important material with cement, water, aggregate and admixture as contents. Due to increasing pollution and demand of concrete, its production should be environmental friendly. In this study, we emphasize on environment friendly concrete. The proportion of silica fume was as follows: add 3%–15% in interval of 3% by weight of cement in concrete and fly ash was add 5%–25% in interval of 5% by total weight …
Published in International Journal of Construction Engineering and Planning · Vol. 5, Issue 1, 2019 · pp. 18–27 Read article
-
Experimental Study of Replacement of VSI Sand by Sea Sand in Concrete
Abstract: Concrete is a construction material used widely over the world and it is very difficult to find versatile alternative for concrete. Concrete is made up of cement, fine aggregates (sand), coarse aggregates and water. Fine aggregate is one of the constituents of concrete which influences concrete mix design substantially. Generally river sand / crushed sand is used as fine aggregate. But considering today’s situation, due to greater demand of river …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 2, 2020 · pp. 8–14 Read article
-
Smog Eating Structure
Abstract: Air quality has deteriaoted significantly over the past two decades, today pollution is one of the largest risk factors contributing to the disease’s burden, Air pollution affects individual health of citizens, increases mortality and morbidity rates and contributes in climate changes. So, in this paper we have used titanium-dioxide-infused concrete, which can remove smog from air when exposed to sunlight and ultraviolet lights. This technology is based on particles of …
Published in International Journal of Construction Engineering and Planning · Vol. 7, Issue 2, 2021 · pp. 15–20 Read article
-
Utilization of Industrial waste in construction Industry – a Review
Abstract: The reuse of industrial wastes will help in solving the environmental pollution issues associated with their disposal, but it will also increase the preservation of natural resources that are reducing rapidly. The major motivation of this project is the increase in waste products and increasing consumption of cement in construction industry. By reducing use of cement cost of construction can be reduced and it also reduces the environmental hazards produced …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 1, 2023 · pp. 57–62 Read article
-
Innovative Concrete Composites: Assessing Mechanical Strength with Fly Ash, Glass, and Granite Waste Incorporation
Abstract: Waste management poses a significant challenge for countries in both current and future contexts. The generation of solid waste from various industries, such as stone, glass, coal, and tires, constitutes a major issue in India, leading to significant environmental and health concerns for the surrounding population. This study addresses these challenges by exploring the utilization of waste granite and glass powder as materials to replace sand and cement, respectively, with …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 2, 2023 · pp. 37–45 Read article
-
No Fine Concrete
Abstract: No-fine concrete has been in use in many countries over more than a century. Its higher porosity helps in percolating rain water directly to ground and thereby helps in recharging groundwater aquifer. In this study, 3 batches of no-fine concrete each with two different sizes of aggregate were prepared to find the mix that generated high compressive strength and study the effect of percentage of fine aggregate on the compressive …
Published in International Journal of Concrete Technology · Vol. 3, Issue 2, 2017 · pp. 18–30 Read article
-
Suitability of Concrete Containing Fly Ash Along with Alccofine
Abstract: With the growing urbanization and rising standard of living and purchasing power of men the demand of concrete does not look to become dormant. But due to limited supply of non-renewable constituents of concrete they are needed to be preserved for the future generation, so there is utmost necessity of using supplementary waste materials in concrete. With advancement in science and technology itis made possible that the waste materials like …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 15–20 Read article
-
TO IMPROVE THE EFFICIENCY OF SILICA FUME CONCRETE
Abstract: A suitable introduction of silica fume in concrete improves both the mechanical and chemical properties of the concrete. The long-live compressive strength of silica-fume concrete has been recently questioned by some researchers and they were regular in touch of it.This paper reports the results of compressive strength data on strength of silica which is on 4- to 6-year-old cores attained from well-documented field experiments which where both silica-fume and non-silica …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 39–44 Read article
-
An overview on the rheology of recycled aggregate concrete with the influence of chemical admixtures
Abstract: : Concrete is one of the most widely used construction material because of its property to be moulded into any kind of structure and shape due to its fluidity at early stages. The fresh properties of concrete can be characterized by its flow behaviour. Rheology is the scientific description of flow properties. Super-plasticizers and air-entrainers are some of the most used chemical admixtures that affect the rheological parameters of fresh …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 14–24 Read article
-
Effect of Accelerated Curing and Normal Curing Regimes on UFGGBFS-Based Semi-Lightweight Concrete
Abstract: This paper deals with the performance of semi-lightweight concrete (sLWC), prepared by using calcite powder pellets as coarse aggregates which was improved by partial replacement of cement with UFGGBFS (ultrafine ground granulated blast-furnace slag). Cement could be replaced by UFGGBFS as 0%, 5%, 10%, 15%, 20%, 25%, 30%, 35%, 40%, 45%, 50%, 55%, 60%, 65%, and 70% to enhance the strength and durability properties of concrete. High-range water-reducing admixtures (HRWA) …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 1–7 Read article
-
Effect of Alccofine on Durability Properties of Concrete
Abstract: Alccofine is a mineral admixture use in concrete for production of workable and durable concrete. It is effective in all belongings of concrete in fresh and hardened state. In this study alccofine 1203 used for inspection the characteristics of concrete in aspects of durability. Alccofine 1203 obtained from Ambuja cement plant in the form of fine powder. The percentage of alccofine mixed in concrete as 3-15% in interval of 3% …
Published in International Journal of Concrete Technology · Vol. 6, Issue 1, 2020 · pp. 23–31 Read article
-
Optimizing Aggregate Gradation for Enhancing Strength Properties of Pervious Concrete
Abstract: Pervious concrete possesses high permeability enabling environmental applications like stormwater recharging. However, lower strength limits widespread infrastructure adoption necessitating enhancements. This study focuses on optimizing aggregate proportions for improving compressive and flexural strength. Mixes were developed with cement variations from 200-500 kg/m3 with fine to coarse aggregates ratios systematically altered. Strengths were measured as per ASTM C39 and ASTM C78. Results showed reduced water-cement ratio and balanced aggregate blends improved …
Published in International Journal of Concrete Technology · Vol. 9, Issue 2, 2023 · pp. 41–49 Read article
-
A STYDY ON MECHANICAL PROPERTIES UNDER THE INFLUENCE OF FELDSPAR ACTIVATOR ON GEOPOLYMERIZATION OF REDMUD AND GGBS
Abstract: It is well known fact that the Ordinary Portland Cement (OPC) is most important construction material. Keeping in view the hazardous effects of Portland cement on environment, efforts are being put to reduce use of cement in concrete with its partial or full replacement by various waste materials such as Red mud (RM), Ground Granulated Blas Furnace Slag (GGBFS or GGBS), Flyash, Silica fume etc.. Geopolymer Concrete (GPC) is a …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 1, 2019 · pp. 1–8 Read article
-
Physical Property of Self-Curing Concrete With Shrinkage Reducing Agent
Abstract: Water is a most widely used material for construction work, it is essential for concreting work or plastering work, etc. Curing is the process for controlling the temperature and consists of moisture movement from and into the concrete and the hydration of the cement and consequently continuous increase in the strength and Curing allows continuous hydration of cement, when curing stops strength increasing of the concrete also stops. The aim …
Published in International Journal of Water Resources Engineering · Vol. 3, Issue 1, 2017 · pp. 29–33 Read article