Search
2000 articles for “design” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Simulation and Analysis of Grid-connected PV System with Active Filter based on P-Q Theory
Abstract: This paper presents a comprehensive analysis of two grid-connected photovoltaic (PV) systems, one with a 100-kW capacity and the other with a 25-kW capacity, incorporating an active filter based on the Instantaneous Reactive Power Theory (P-Q theory). In comparison to passive filters, the active filter based on the P-Q theory offers several advantages. While passive filters are limited in their ability to adapt to varying grid conditions and load profiles, …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 9, Issue 2, 2023 · pp. 1–11 Read article
-
Effects of Introducing Slots in Rectenna
Abstract: Wireless power is turning out to be a promising technology in near future. This would not only be an alternative to batteries and wired supply, but also protect our environment from the harmful effects of batteries. In this paper analysis of introducing slots in the rectenna is studied. An experimental RF energy harvesting system to transmit wireless powers using microwaves is designed and then effects of slot loading on the …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 1, Issue 1, 2015 · pp. 32–38 Read article
-
A Single Band Microstrip Dipole Antenna for PFDA Applications
Abstract: ABSTRACT This paper presents the simulation and experimental effects of a single band microstrip dipole antenna. The precise ness of this antenna design is because of its simple structure and feeding mechanism with low production cost. The antenna is designed at a substrate with εr = 4.4 and height h = 1.6mm for 1.504 GHz frequency bands. The resonance of antenna I -37dB achieve at the resonant frequency of 1.504GHz …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 5, Issue 1, 2019 · pp. 6–9 Read article
-
Comparative Analysis of Multi- Synchronous Bidirectional Network-on-Chip Architecture
Abstract: ABSTRACTA dynamic reconfigurable multi-synchronous bidirectional channel network on chip architecture is proposed to improve the performance of on chip communication. This work aims to increase network-on-chip (NOC) in the runtime traffic situation. The main objective of this paper is to reduce the area, delay and power consumption of the architecture. Lower packet delivery latency, higher packet consumption rate and better bandwidth utilization is done by the multi-synchronous bidirectional NoC’s router. …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 5, Issue 2, 2019 · pp. 21–31 Read article
-
Internet of Things (IoT) in Renewable Energy and Role of Engineers
Abstract: The need of green structure or keen urban areas is coming into reality as center movements from conventional wellspring of energy to Renewable wellspring of energy like breeze energy, sun-based energy, and hydro energy are the lights of future in light of the fact that the customary sources like fossil, coal, and oil fills are restricted, and are going to an end in light of the expanding request. To construct …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 7, Issue 1, 2021 · pp. 23–27 Read article
-
Developing a Python-based Chatbot Library SansArLIB for Advanced Communication: A Comparative Study with Baseline Chatbots
Abstract: The purpose of this study was to develop and evaluate a Python-based library called "SansArLIB" for improving chatbot technology. The library was designed to provide developers with a comprehensive set of tools and resources for creating more advanced chatbots that can better understand and respond to user queries. The study involved developing the library and testing it across three different chatbot scenarios. The results showed that the SansArLIB library had …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 9, Issue 1, 2023 · pp. 1–6 Read article
-
Train Accident Prevention Using Arduino Uno
Abstract: The process of technology is never-ending. It is a great service to the community to be able to use modern technology to build a product that will improve the lives of others. This paper describes the design and execution of an Arduino-based train accident prevention system that is adaptable, secure, and low-cost. A stand-alone Arduino board serves as the basis for the design. This solution is meant to be scalable …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 9, Issue 2, 2023 · pp. 40–46 Read article
-
Nanomechanics in Medicine
Abstract: Nanomechanics, an emerging field at the intersection of nanotechnology and mechanics, holds great promise for revolutionizing medicine. This article explores the significant role of nanomechanics in various aspects of healthcare, including diagnostics, drug delivery, tissue engineering, and cancer detection.One of the key applications of nanomechanics in medicine is in the development of nanomechanical sensors for disease detection. These sensors can detect biomarkers associated with diseases such as cancer at very …
Published in International Journal of Applied Nanotechnology · Vol. 9, Issue 2, 2023 · pp. 22–26 Read article
-
Comparative Study of Machining Parameters on Electrical Discharge Machining of Inconel 718 using Copper and Copper- Tungsten Electrode.
Abstract: The present scenario in all the manufacturing industries is to make a priority list to cope up the challenges imposed by the superior materials like alloys, ceramics and composite materials which have difficulty for machining. In this study, comparison of experimental results which is found by optimization of machining parameters on material removal and tool wear rate along with two different electrodes material such as copper and copper tungsten for …
Published in International Journal of Metallurgy and Alloys · Vol. 4, Issue 1, 2018 · pp. 1–8 Read article
-
Revolutionizing Cancer Treatment through Nanoparticle-Based Drug Delivery Systems
Abstract: Cancer is a leading cause of death worldwide, and the treatment options available have significant limitations, including toxicity, low efficacy, and drug resistance. Nanotechnology has made significant progress in recent years, resulting in the emergence of drug delivery systems based on nanoparticles that are used for cancer treatment. These systems offer numerous benefits, including targeted drug delivery, increased drug stability, and reduced toxicity. Nanoparticle-based drug delivery systems are a promising …
Published in International journal of Nanobiotechnology · Vol. 8, Issue 2, 2022 · pp. 8–15 Read article
-
Bauschinger Effect on Micro-Lattice of Ti-6al-4v Implants by Using Finite Element Analysis
Abstract: This research's primary objective is to apply the Bauschinger effect to develop a micro-lattice of titanium alloy implants using nonlinear finite element analysis. In orthopedics, micro-lattice cellular Ti-6Al-4V designs with controlled porosity and pore sizes that are good for tissue ingrowth and biological mechanisms are often used. In this investigation, CAD models of various unit lattice structures were generated using Intra-Lattice software, incorporating design parameters such as strut length, strut …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 1, 2023 · pp. 18–24 Read article
-
Microscopic Avengers: The Rise of Nanorobots in Biomedical Engineering
Abstract: Nanorobotics is an emerging field at the intersection of nanotechnology and robotics, offeringa promising new frontier in biomedical engineering. Nanorobots, at the scale of a fewhundred nanometres, are designed to perform a variety of tasks within the human body,ranging from targeted drug delivery to precise surgical procedures. This article explores theevolution, design, functionality, and applications of nanorobots in biomedical engineering,highlighting their potential to revolutionize healthcare.The evolution of nanorobots has seen …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 2, 2023 · pp. 10–15 Read article
-
Study of optical properties for five ring hexagonal photonic crystal fiber
Abstract: In this paper, basically, we have investigated about different optical properties for five-ring hexagonal photonic crystal fiber. Silica glass as material for PCF is taken and different parameters analyzed like, Effective refractive index, confinement loss and Waveguide dispersion. Properties are analyzed by varying the key design parameters like air hole diameter and lattice pitch. The comparative study of the results for different design parameters is analyzed. It has been observed …
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 1, 2019 · pp. 28–33 Read article
-
MECHANICAL BEHAVIOR OF MICRO-LATTICE STRUCTURE OF BCC ARCHITECTURE IN SANDWICH CONSTRUCTION UNDER UNI-AXIAL COMPRESSIVE LOADING CONDITIONS
Abstract: ABSTRACT: Due to high energy absorption and fire resistant characteristics, the researchers have focused on micro-lattice structures. This research paper focused on applications of micro-lattice structures in the foreign object impact conditions and has high potential in the future of any structural applications, mainly aircraft structural applications. The micro-lattice structures are of body centered cubic (BCC) architectures and for modeling, the structures with four different unit cell edge lengths are …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 2, 2018 · pp. 1–23 Read article
-
Review on the Mechanics of Lightweight 3-D Graphene Assembly
Abstract: The purpose of this paper is to improve the results of Recent advances in three-dimensional (3D) graphene assembly, it has shown how we can make solid porous materials which is lighter than air. In its two-dimensional form, graphene is thought to be the strongest of all known materials. But researchers until now have had a tough time decoding that two-dimensional strength into beneficial three-dimensional materials. It is possible that these …
Published in International Journal of Mechanics and Design · Vol. 3, Issue 1, 2017 · pp. 9–13 Read article
-
A review on the Solar Still
Abstract: In present scenario the problem of clean potable water is very crucial. Due to adverse weathercondition the potable water is not available in the required quantity. The available water is brackishand to convert that in to fresh water is the main requirement in present scenario. As per the report byWHO and UNICEF the improved quality of water is used by 91% world population. Due to rapidindustrialization and urbanization the requirement …
Published in International Journal of Mechanics and Design · Vol. 8, Issue 2, 2022 · pp. 1–6 Read article
-
Enhancing the Heat Transfer in the Thermal Chimney by Attaching the Fin under CFD Analysis
Abstract: The primary and secondary heaters in heat exchangers were numerically evaluated at nominal temperatures of 140°C for the primary heaters, 100°C for the secondary heaters, and 20°C for the ambient temperature in order to validate the design idea for enhancing the air temperature. The “convective heat transfer” of air in a thermal chimney built to laboratory size using two different types of electrical heaters and a rectangular cross-section of constant …
Published in International Journal of Mechanics and Design · Vol. 9, Issue 2, 2023 · pp. 9–26 Read article
-
Review of Optimization Process Parameters in Welding system
Abstract: This study was based on design of experiment (DOE) using Taguchi method with four welding parameters namely welding current, welding speed, root gap and electrode angle considered for experimentation. An orthogonal array of L9 experimental design was adopted and ultimate tensile strength was investigated for each experimental run. The tensile test was carried out on extracted welded and unwelded specimens using universal testing machine (UTM). Microstructures of the welded specimens …
Published in International Journal of Manufacturing and Materials Processing · Vol. 2, Issue 1, 2016 · pp. 48–54 Read article
-
Selection of Gear Materials Using MCDM-TOPSIS Approach
Abstract: Materials selection are a key issue in the optimal design of the industrial product. Material selection is a difficult and subtle task because of an immense number of different available materials. Increasing demand for gears in the different field of applications has forced manufacturers to design and develop gears which compete in the global market and satisfy the user requirements as well as environmental conditions. Various attributes of gear materials …
Published in International Journal of Manufacturing and Materials Processing · Vol. 3, Issue 2, 2017 · pp. 10–15 Read article
-
Effect of Pulsed Current Micro Plasma Arc welding parameters on Mechanical properties AISI 304 and AISI 430 dissimilar weld joint
Abstract: In the present work, two dissimilar AISI 304 and AISI 430 sheets of 0.4mm thick welded using Micro Plasma Arc Welding. Welding input parameters like peak current, base current, pulse rate and pulse width are considered and output responses like fusion zone grain size, hardness and ultimate tensile strength of the welded joint are considered. 31 experiments are performed as per Central Composite Design (CCD) design matrix of Response Surface …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 1, 2019 · pp. 1–26 Read article