Search
195 articles for “Compressive strength”
-
Utilization of Plastic Waste in Pavement Block by Partially Replacement of Fine Aggregate
Abstract: The rapid expansion of urban areas and industrial activities has resulted in a considerable rise in production of plastic waste. This presents a significant ecological issue because of the restricted biodegradability of plastics. The possible approach is to investigate the incorporation of plastic waste in building construction materials. This research investigates the theoretical application of waste plastic in pavement blocks as a partial substitute for fine aggregate. The emphasis is …
Published in International Journal of Sustainable Building Technology · Vol. 8, Issue 2, 2025 · pp. 1–9 Read article
-
Effect of Colloidal Nanosilica on High Strength Rice Husk Ash Concrete
Abstract: Nowadays, supplementary cementitious materials (SCMs) are used in concrete because it reduces CO2 emission during. The husks, which are production of cement, reduces cement contents, improve workability, increase strength and enhance durability. Pozzolanic reaction takes place when siliceous or aluminous material comes in contact with calcium hydroxide in the presence of moisture to form compounds possessing cementitious properties approximately 50 percent cellulose, 30 percent lignin and 20 percent silica, are …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 33–43 Read article
-
Evaluation of Strength in Natural Bricks by Using Mineral Admixtures
Abstract: In the construction field nowadays substructures and superstructure are adopted by bricks only for the framed type of structure and also load bearing wall adopted for bricks in super structure works. Last four decades in our Tamil Nadu more number of bricks were used for the buildings. In this work, it is decided to design an alternate to clayey soil with addition of stabilisers such as fly ash, rice husk …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 85–89 Read article
-
Revolutionizing Concrete Strength: The Role of Carbon Nanotube Reinforcements
Abstract: Abstract The integration of carbon nanotubes (CNTs) into concrete represents a revolutionary advancement inconstruction material technology. Carbon nanotubes, known for their exceptional mechanical,electrical, and thermal properties, offer transformative potential for enhancing the strength, durability,and functionality of traditional concrete. This study explores the role of CNTs as a nano-reinforcementmaterial, focusing on their impact on compressive strength, tensile capacity, and resistance to crackingand environmental degradation. By incorporating CNTs, concrete can achieve unprecedentedmechanical …
Published in International Journal of Structural Engineering and Analysis · Vol. 11, Issue 1, 2025 · pp. 27–31 Read article
-
To Study the Effects on Mechanical Properties ofConcrete by Partial Replacement of Sand with MetallicSwarf
Abstract: Abstract The utilization of metallic swarf in concrete manufacturing is increasing in importance due to its environmental and economic benefits. However, the mechanical qualities of such concrete frequently appear inferior to regular concrete. To improve the mechanical characteristics of standard concrete, numerous additives have been researched, but the utilization of metallic swarf remains a mystery. This research investigates the recycling of waste metallic swarf produced in the automobile industry and …
Published in International Journal of Mechanics and Design · Vol. 11, Issue 1, 2025 · pp. 54–60 Read article
-
Study on the Effects of Polypropylene Fiber in Concrete Paver Blocks
Abstract: Road transportation is the lifeline of the nation and its development is a crucial concern. The traditional bituminous pavement needs the continuous maintenance and rehabilitation operations, which ultimately leads to the scope for cement concrete pavements. This paper highlights the effects of polypropylene fibers in concrete paver blocks, which is a recent advancement in the field of reinforced concrete pavement design. Concrete paver blocks prepared for M30 grade and the …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 2, 2017 · pp. 32–38 Read article
-
Addition of Musa-Pseudo Stem Liquid for Improved Performance in Sandcrete Mixtures Used for Civil Engineering Works
Abstract: The functioning of re-characterized sandcrete mortars is one that is of great concern both to structural and highway engineers; therefore, there has been an enthusiastic need to continuously improve its performance in order to serve the interest of stability and economy. The present research sought was concerned with modification of the property of sandcrete mortar in the fresh and hardened state. The procedure involved addition in varying amounts 5–25% of …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 3, Issue 2, 2017 · pp. 38–48 Read article
-
Evaluation of The Resistance of Concrete by Partial Replacement of Coarse Aggregate with Steel Slag and Cement with Bentonite Powder
Abstract: According to the WHO, concrete is the third most consumed material by humans after food and water. Concrete consists of cement, coarse aggregate, fine aggregate and water. In the production of cement, carbon dioxide is released into the environment, which becomes a big problem for environmental protection. Therefore, there is a need to modify the cement with some natural materials with pozzolanic properties. The aggregates, which are extracted from natural …
Published in International Journal of Concrete Technology · Vol. 8, Issue 1, 2022 · pp. 21–29 Read article
-
Feasibility Study on Spent Pot Lining (SPL) as Raw Material in Cement Manufacture Process
Abstract: SPL is a waste material that comes free from the production of Aluminum industrial. SPL is separated in two fractions: a carbon-rich fraction referred to as “first cut” and a refractories rich fraction referred to as “second cut”. One commonly used solution is the processing of SPL fractions in cement kilns. The primary reasons for the cement producer to process the SPL are the reduction in raw material costs from …
Published in International Journal of Environmental Chemistry · Vol. 2, Issue 2, 2016 · pp. 18–26 Read article
-
A Review of Bamboo Fiber’s Use in Concrete
Abstract: AbstractLocal sustainable materials must be found and used in the building and provision of homes due to therising demand for natural resources in emerging nations. Natural building materials that are regardedas sustainable are “green”, thousands of tons of bamboo are traded annually, and this creates a lot ofwaste. Bamboo was utilized in the building’s construction as well as in structural elements like roofing,columns, and supports. The main component utilized in …
Published in International Journal of Manufacturing and Materials Processing · Vol. 10, Issue 2, 2024 · pp. 33–36 Read article
-
Study on Partial Replacement of Cement by Bagasse Ash in Cement Concrete
Abstract: Today, researchers all over the world are trying to utilize agricultural wastes like corncob ash, rice husk ash, bagasse ash as a partial replacement of cement, thereby reducing cement production and greenhouse gases emissions. Sugarcane bagasse is a fibrous waste product of sugarcane refining industry and being disposed to open landfills causing serious environmental impacts. In this study, Bagasse ash was partially replaced in the ratio of 0%, 5%, 10%, …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 29–35 Read article
-
Utilization of E-Waste in Concrete
Abstract: E-waste or electronic waste is a term used for discarded electronic products that have become unwanted, non-working or outdated, and have basically touched the end of their useful life. The amount of e-waste materials that needs to be disposed off keeps increasing day by day which make e-waste a developing issue posing serious pollution problems to the mankind and the environment, not only in India but also globally. Reusing e-waste …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 42–49 Read article
-
Exploring the Utilization of Bakelite Waste as a Partial Coarse Aggregate Replacement in Concrete: An Assessment of Mechanical Properties and Durability
Abstract: Abstract The burgeoning challenge of plastic waste management has prompted researchers to seek sustainable alternatives within various sectors, particularly in the construction industry, which is a significant consumer of raw materials. This study thoroughly investigates the viability of incorporating Bakelite waste, a type of thermosetting plastic known for its durability and resistance to degradation, as a partial replacement for coarse aggregates in concrete formulations. Concrete mixtures were meticulously designed with …
Published in International Journal of Concrete Technology · Vol. 10, Issue 2, 2024 · pp. 6–10 Read article
-
Application of Suitable Admixtures (Lime and RHA) for Improvement of Pavement Subgrade
Abstract: Abstract The quality of a pavement depends on the strength of its sub-grade. The present investigation has been carried out with easily available materials like lime and rice husk ash mixed individually and in combinations with different proportions. The different percentages of lime with respect to weight of dry soil were 2%, 4%, 6%, 8% 10% and for rice husk ash (RHA) were 3%, 6%, 9% and 12%. In each …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 1, Issue 2, 2015 · pp. 14–31 Read article
-
Compressive Behaviour of Pristine and Impacted Composite Laminates: Numerical Simulations and Experimental Studies
Abstract: To predict the compressive strength, various failure criteria studied in this article include are Tsai-Wu, Hill, Hoffman, Maximum Stress and Quadratic. The quadratic failure criterion has been implemented using PATRAN Command Language (PCL). Is observed that quadratic failure criterion provides least failure indices, employed for conservative design. The compressive strength of the pristine and impacted laminate computed using analytical experiment, and finite element analysis (Numerical) commercial packages. Experimental program employing …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 2, Issue 2, 2016 · pp. 19–32 Read article
-
Influence of Type and Size of Fine Aggregate on Glass Fiber Reinforced Self-Compacting Mortars (GFRSCM)
Abstract: Abstract This paper addresses the fresh and hardened state behavior of glass fiber reinforced self-compacting mortars (GFSCMs) with various types and sizes of fine aggregate. Mini-slump flow and mini V-funnel tests were performed to evaluate the workability of GFSCMs. Compressive strength, split tensile strength, and flexural strength tests at the end of 28 days of water curing were determined. Water sorptivity tests were conducted on 28-day cured cube specimens. The …
Published in International Journal of Concrete Technology · Vol. 1, Issue 1, 2015 · pp. 63–71 Read article
-
Synthesis and characterization of high saline water resistant sulphur composite from petrochemical waste
Abstract: Petrochemical industry produces variety of side products and waste materials like sulphur, spent catalysts, spent adsorbents, etc. These waste materials can be converted to the value-added products by forming their composites with unique properties. For example, sulphur due to its chemical properties like high resistivity to corrosive environment, hydrophobic nature, antifungal property, its composite can be prepared and used in construction industries as a substitute for cement composite material. To …
Published in International Journal of Green Chemistry · Vol. 6, Issue 2, 2020 · pp. 64–77 Read article
-
Influence of Rubber Particle Size on the Ductility and Energy Absorption of Structural Elements
Abstract: Abstract This research investigates how the rubber particle sizes influence the ductility and energy absorption of structural members made of RC. For this analysis, the different types of waste tire rubbers (with a grains size of 1–2 mm, 3–5 mm, and 6–10 mm) were partially replaced for fine aggre-gates. The compressive strengths, load-deflection behaviors, ductility ratios and energy dissipation properties are discussed by means of experimental mix design analysis and …
Published in International Journal of Structural Engineering and Analysis · Vol. 12, Issue 1, 2026 Read article
-
Fresh and Hardened Properties of High Performance Concrete with Weld Slag as Fine Aggregate
Abstract: This research centers on the incorporation of welding slag, the residue remaining after the welding process, as fine aggregates in the production of high-performance concrete with a compressive strength of 70 MPa. The chemical and physical characteristics of welding slag aggregates (WSA), such as chemical compositions, specific gravity, SEM images, XRD, and EDS analysis, were investigated. Additional investigations were carried out by substituting welding slag with standard sand at varying …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 2, 2023 · pp. 29–36 Read article
-
Study of the Effect of Water Retarding Concrete Admixtures on the Properties of Concrete
Abstract: Water retarding concrete admixtures and super plasticizer are extensively utilized to recover the structural and mechanical properties of fresh and hardened concrete. These admixtures are more regularly used in pre-stressed concrete, slim components with overfilled and densely filled reinforcement, beams and slabs pre-cast basics and long slender column. In current decades, marvelous success has been attained in the progression of chemical admixtures for Portland cement. Most efforts have concentrated on …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 1, 2018 · pp. 10–14 Read article