Search
124 articles for “E-glass”
-
Deposition and Characterization of ZnO Thin Films by Thermal Vacuum Thermal Evaporation Method for Photoconductive Sensor Application
Abstract: In this work we have deposited ZnO thin films using thermal evaporation method. The films have been deposited on silicon substrate for structural characterization and on glass substrate for optical characterization. The structural, surface morphology, optical properties and electrical properties of ZnO thin films were investigated systematically using X-ray diffractometer (XRD), scanning electron microscope (SEM), atomic force microscopy (AFM), ellipsometeric measurement and semiconductor parameter analyzer respectively. The deposited ZnO thin …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 2, Issue 1, 2016 · pp. 1–7 Read article
-
Impact of Substrate Temperature on Chemically Deposited Cds Thin Films
Abstract: The interest for renewable energy sources are increasing day by day due to the limited availability of fossil fuel. Among all the renewable energy sources solar energy is growing interest due to its easy availability almost among all area of earth where people lives. Solar energy can be used as a source of energy by two ways: Solar Photovoltaic Cell and Solar thermal. Photovoltaic cells are the easiest way for …
Published in International Journal of Energetic Materials · Vol. 1, Issue 1, 2015 · pp. 22–26 Read article
-
Dynamic Behavior of Hybrid Unidirectional Without Cracked Composite Plate
Abstract: The composite material is one of the most common materials used in engineering applications due to the wide range of properties, high strength, cheap, easy to manufacture and lightweight. Therefore, many studies and researches have been conducted and are currently being conducted to obtain the appropriate mathematical models that describe the behavior of these materials when exposed to different types of mechanical loads. A mathematical model was built by using …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 1, 2020 · pp. 36–47 Read article
-
Effect Of Capping Agents And Annealing On The Optical Properties Of (Cd0.8-Zn0.2)S And (Cd0.8-Zn0.2)S:Eu Films Prepared By CBD Technique
Abstract: Thin films of (Cd0.8-Zn0.2)S and (Cd0.8-Zn0.2)S:Eu are prepared by Chemical Bath Deposition (CBD) technique on glass substrates at 60ºC temperature by adding Mercaptoethanol and Methanol as capping agents(CA). The films were annealed at 400°C for two minutes and their optical properties were studied. The effect of the presence of capping agents and annealing was investigated. The optical constants such as refractive index, extinction coefficient, optical and electrical conductivity, real and …
Published in International Journal of Applied Nanotechnology · Vol. 2, Issue 1, 2016 · pp. 1–7 Read article
-
A Comparative Evaluation of Geopolymer, Conventional and GFRP Retrofitting Techniques in Augmenting Seismic Robustness of RC Structures
Abstract: Abstract The requirement of retrofitting an old existing structure, rendered structurally unsafe (based on its structural health assessment) is observed to be a major challenge faced by engineers as it necessitates comprehensive and complicated repair procedures. It was further seen that during earthquake, the main reason for failure of any structure was the failure of its beam column joints, thereby making it essential to strengthen them specifically. Until recently, the …
Published in International Journal of Structural Engineering and Analysis · Vol. 11, Issue 1, 2025 · pp. 1–13 Read article
-
Recent Trends in Bio Ceramic and Polymer Compositesfor Biomedical and Dental Applications
Abstract: Advanced biomaterials with great promise for use in dental and biomedical applications are bio-ceramic and polymer composites. These composites combine the flexibility, biodegradability, and processability of polymers with the mechanical strength, bioactivity, and biocompatibility of bio-ceramics. Clinical success is often limited by the biological response and tissue compatibility of conventional materials such as metals and single-phase ceramics. Oste conductivity and bone-like characteristics are exhibited by bio-ceramic materials, such as hydroxyapatite …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 · pp. 1–5 Read article
-
Basic Fundamentals of Different Solar Cells, Solar Energy Materials and Photovoltaic Performances
Abstract: Solar cell is one of the thrust areas of modern technology in the field of renewable energy. Crystalline semiconductor wafer based solar cells (SCs) (thicknesses almost 200–300 μm) mainly crystalline-Si or GaAs based solar cells are playing the legend role in last few decades. With technological revolution, thin film SCs (thickness range 1–2 μm), dye-sensitized or Graetzel, organic/polymer and plasmonic solar cell respectively are known as 2nd,3rd, 4th and 5th …
Published in International Journal of Energetic Materials · Vol. 1, Issue 1, 2015 · pp. 1–9 Read article
-
Studies on sources of lithium
Abstract: AbstractLi is abundant in nature amounting 20 mg/kg of the earth crust. Li widely used in Li ion batteries (LIBs), powerLIBs, chemicals, ceramics, glasses, rubber, reactors, pharmacy, space sectors and alloyed to Al. Sources of Li are natural deposit of minerals, salt crust, brine, salt lakes and ocean basin accumulations. Economical route of extractions are hydrometallurgy and pyrometallurgy. Sorption of selective element by inorganic ion exchange applied for poor containment …
Published in International Journal of Chemical Engineering and Processing · Vol. 6, Issue 2, 2020 · pp. 12–17 Read article
-
Nanotechnology in Refractory Materials: Innovations and Applications
Abstract: Nanotechnology has become a focal point of research across diverse scientific fields, including chemistry, medicine, materials science, and engineering. Its integration into refractory products has led to groundbreaking advancements in industries such as steel, glass, casting, and cement, particularly using nanomaterials like nanoparticles, nano additives, and nanostructured materials. This article provides an in-depth examination of the latest developments in monolithic refractories, focusing on how nanotechnology has enhanced their performance, durability, …
Published in International Journal of Metallurgy and Alloys · Vol. 10, Issue 1, 2024 · pp. 7–11 Read article
-
Exploring the Integration of Recycled Waste Materials in Concrete: A Comprehensive Overview
Abstract: The utilization of recycled materials from construction sites has experienced a notable increase in recent times, driven by the principle of efficient resource usage established by the International Council of Building in 1994. Recycled materials, including recycled concrete aggregate or brick aggregate sourced from construction and demolition waste, waste glass from municipal waste or recycled sources, and gypsum from gypsum boards, are being increasingly employed as substitutes for primary raw …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 26–34 Read article
-
Plant-Drive Natural Fiber Reinforced ThermoplasticComposites by Film Stacking Method
Abstract: Fiber reinforced polymer composites have a long history of being significant in a variety of applications because of their exceptional specific strength and modulus. An alternative to synthetic polymers that pollute the environment is provided by thermoplastic and vetiver fiber (VF) composites. In comparison to conventional reinforcing fibers (glass and carbon fiber), natural fibers (such as banana, sisal, coir, jute, vetiver, flax, hemp, and kenaf) have the following benefits: they …
Published in International Journal of Polymer Science and Engineering · Vol. 10, Issue 1, 2024 · pp. 29–39 Read article
-
Performance Enhancement and Improvement of Energy Efficiency in Evacuated Tube Heat Pipe Collector with Nanocomposite: A Review
Abstract: Solar collector tube is used to combine incident energy and convert it into heat energy. Recently several studies have been done on improving the performance of the solar collector. Solar energy is clean energy and does not create pollution. The sun gives more power than we need. Solar collector consists of an absorber unit which transfers the heat energy of the sun to a working fluid. It is easily seen …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 1, 2021 · pp. 27–31 Read article
-
EFFECT OF HEAT AGEING ON MECHANICAL PROPERTIES OF POLYAMIDE 6(NYLON 6) & POLYAMIDE 12(NYLON 12)
Abstract: Polyamide 6 or Nylon 6(PA 6) and polyamide 12 or Nylon 12 (PA 12) are well known engineering semi-crystalline polar polymers characterized by the presence of amide linkage (-CONH-) in the repeating units of their chains. The glass transition temperature (Tg) of PA 6 and PA 12 is ~50 °C and ~37 °C respectively. PA 6 is widely used for gears and bearings, fittings in automobile industry for under hood …
Published in International Journal of Polymer Science and Engineering · Vol. 2, Issue 2, 2016 · pp. 1–12 Read article
-
Analysing Material, form, and Aesthetics in the Façade of Casa Batllo
Abstract: Today as the trend of modernism continues, we can see a lot of naiveness in architecture. All the way people have been perpetuating towards the adoption of modern architectural trends. Here in this article, we are studying the oversight and importance of designing the building facades. The Building facade defines the feel of the overall building. The Building façade has a special role to play in light transmittance, acoustic performance …
Published in International Journal of Architecture and Infrastructure Planning · Vol. 7, Issue 2, 2021 · pp. 13–23 Read article
-
Development of Solar Cooker using Mirror as Reflector
Abstract: This research paper will present the development and testing analysis in the design of Solar Cooker. The research project is developed using solar energy in cooking system, which is renewable and supports in preserving much of the non-renewable natural resources. In order to meet the demands of global population, many of the natural resources such as fossil fuels and woods are used abundantly causing deforestation, erosion and depletion of non-renewable …
Published in International Journal of Mechanics and Design · Vol. 4, Issue 2, 2018 · pp. 30–37 Read article
-
Silicone Coating on Porcelain Insulator
Abstract: Dubai Electricity and Water Authority (DEWA) utilized porcelain insulators in the transmission overhead line system. These insulators reputed to be the best insulators with regard to the design and durability. In spite of satisfactory performance, porcelain insulators have disadvantages such as regular washing and cleaning. Because of the coastal location and industrial pollution of the overhead lines, frequent washing of porcelain insulators is required to ensure interruption free and reliable …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 6, Issue 2, 2020 · pp. 31–37 Read article
-
Distillation of Salt Water Using Solar Energy
Abstract: In our country, the problem of drinking water is becoming increasingly important, due to the population growth and rising living standards. Desalination of seawater and brackish water is now possible to meet the demand for potable water. Among the several methods, solar distillation is a smart solution for isolated and remote area. The main objective of the present work is the study of a plan solar still with greenhouse effect. …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 3, Issue 2, 2017 · pp. 7–12 Read article
-
Study of Dynamic Mechanical and Thermal Properties of Poly(Ether Ether Ketone) Carbon Nanotubes
Abstract: The effect of polyetherimide (PEI) as a compatibilizing agent on the morphology, thermal, electrical and dynamic-mechanical properties of poly(ether ether ketone) (PEEK)/single-walled carbon nanotube (SWCNT) nanocomposites, has been investigated for different CNT loadings. After a pre-processing step based on ball milling and premixing under mechanical treatments in ethanol, the samples were prepared by melt extrusion. A more homogeneous distribution of the CNTs throughout the matrix is found for composites containing …
Published in International Journal of Polymer Science and Engineering · Vol. 3, Issue 1, 2017 · pp. 1–21 Read article
-
Study of optical properties for five ring hexagonal photonic crystal fiber
Abstract: In this paper, basically, we have investigated about different optical properties for five-ring hexagonal photonic crystal fiber. Silica glass as material for PCF is taken and different parameters analyzed like, Effective refractive index, confinement loss and Waveguide dispersion. Properties are analyzed by varying the key design parameters like air hole diameter and lattice pitch. The comparative study of the results for different design parameters is analyzed. It has been observed …
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 1, 2019 · pp. 28–33 Read article
-
Review on Natural Fiber Composites: Banana/Hemp Fiber and Its Hybrid Composites
Abstract: The centuries ago usage of composites materials plays important role in industrial revolution. In ancient days Egyptians used straw as reinforcement in clay bricks to build house. With the invented of glass fiber and resins, glass fiber reinforced composites found its application in many areas. Abundance nature and moderate specific strength than most of the organic fibers, low density and biodegradable nature make the natural fiber as attractive reinforcement in …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 2, 2015 · pp. 14–27 Read article