Search
1368 articles for “Enhancement”
-
Effects of Compatibilizer and Paper Sludge Content on the Performances of Thermoplastic Polymer Composites
Abstract: One of the environmental issues affecting third-world countries is the economic use of lignocellulose waste, which is now being researched. Paper sludge (PS) composites will allow for the effective use of a waste material that is currently burned or buried, as well as the ability to lower the cost of the composite that is created. In this study, the mechanical and thermalcharacteristics of environmentally friendly composites constructed from PS-reinforced recycled …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 8, Issue 2, 2022 · pp. 10–21 Read article
-
Examination of Root Cause of Fuel Tanker Truck Accident in Nigeria: The Concept of Reliability of Non-Human Factor
Abstract: The non-human factor in terms of fuel tanker truck accident in some area of Nigeria was investigated to know the root cause as well the contributing factors and to project the way forward to mitigate the menace, because at the end human life are lost. This investigation was addressed by applying the concepts of reliability, probability and relative accident consequence, in which the mean time between accident, accident rate and …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 9, Issue 1, 2023 · pp. 1–10 Read article
-
Kinetics of oxidation of Isonicotinic Acid Hydrazide by Iron (III)-2,2ı-Bipyridyl complex-Micellar effect of Sodium DoDecyl Sulphate
Abstract: The kinetics of oxidation of Isonicotinic Acid Hydrazide (INH) using Iron (III) -2,2ı-Bipyridyl complex was studied spectrophotometrically in acidic medium. The stoichiometry of the reaction between INH and Iron (III) - 2,2ı-Bipyridyl complex was found to be 4:1. The rate of the reaction is enhanced by increasing [acid]. The reaction obeys first order kinetics with respect to iron (III) and 2, 2’Bipyridyl.The rate of the reaction is markedly accelerated in …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 4, Issue 1, 2018 · pp. 51–56 Read article
-
Corrosion Protection of Copper Metal by Nanocoating in Nitrogen dioxide Environment
Abstract: Nitrogen dioxide is an acidic gas. It absorbs moisture to produce nitric acid. It creates corrosive medium for copper metal. It forms corrosion cell on the surface of copper and accelerate corrosion reactions. The corrosion cell formation is written as: Cu|Cu2+||H+|H2 thus corrosion reactions start and copper is oxidized into Cu2+surface and it is oxidized into Cu2+ whereas H+ ion is reduced into H2. Nitric acid environment copper exhibits galvanic, …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 8, Issue 1, 2022 · pp. 1–11 Read article
-
Management of Technology –Theory and Practice
Abstract: Successful companies often link engineering, science, and management disciplines to develop and enhance their technological capabilities to achieve their strategic objectives besides giving competitive advantage to themselves on the basis of proprietary knowledge and know-how. As a result, they are making judicious use of technologies in launching their products in the market. This study is based on the theory of technological change process, which was developed by the ideas of …
Published in International Journal of Construction Engineering and Planning · Vol. 2, Issue 1, 2016 · pp. 34–46 Read article
-
Stabilization of Landslide Affected Soil Using Silica Fume Glass Fiber Powder and Sodium Silicate
Abstract: Highly swelling soils are present in many parts of Tamil Nadu and they are highly problematic in utilizing for the structural purpose. Numerous studies were conducted using several materials for stabilizing them; through literature study it’s found that a single material such as lime or cement is not suitable for stabilizing the concerned soil owing to several bottlenecks. In this study we had made an elaborate attempt to utilize manufactured …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 2, 2017 · pp. 9–17 Read article
-
Retrofitting of Existing Building by Concrete Jacketing
Abstract: Seismic Retrofitting is engineered mitigation techniques for structural engineers. It is defined as the modification of existing structures to make them more resistant to seismic activity, ground motion or soil failures due to earthquakes. It is generally required for earthquake damaged and vulnerable buildings with no exposure to severe earthquakes. Retrofit enhances the structural capabilities of the building. In present time, there are many local and global retrofit techniques in …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 49–84 Read article
-
To Study About Use of Plastic Waste in Flexible Road Construction
Abstract: The plastic wastes can be used in road construction and the field tests endured the stress and proved that the plastic wastes used after proper processing as a preservative would enhance the lifespan of the roads and also solve environmental problems. Plastic use in road construction is not new. It is already in use as PVC or HDPE pipe mat passages built by mending composed of PVC (polyvinylchloride) or HDPE …
Published in International Journal of Construction Engineering and Planning · Vol. 5, Issue 1, 2019 · pp. 12–17 Read article
-
Awareness of Total Quality Management and Extent Used in Construction Projects
Abstract: Construction industry is a major sector in India with country’s GDP (Gross Domestic Product) of9% (2017) as per world bank. For increasing the share from such sector in this competitive environment TQM can be used as tool of strategy. TQM is a management strategy focusing on the customer satisfaction through continuous improvement of the process and enhancing team work. Here all employees associated with the project are involved to follow …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 2, 2020 · pp. 1–7 Read article
-
Individual and Combined Effects of Lead Rubber Bearing and Fluid Viscous Damper Techniques on Seismic Response of Irregular Reinforced Concrete Buildings
Abstract: Most old structures that do not meet current seismic regulations may sustain significant damage or perhaps collapse as a result of an earthquake. The seismic enhancement could potentially help people survive a major earthquake. Since earthquake engineering began, not only in India but also in other nations, earthquake-resistant construction of reinforced concrete buildings has been a constant topic of research. Buildings are still being damaged as a result of earthquakes. …
Published in International Journal of Construction Engineering and Planning · Vol. 8, Issue 2, 2022 · pp. 17–28 Read article
-
Study of Durability Properties of Bagasse Ash Concrete and Its Behaviour when Exposed to Elevated Temperatures
Abstract: The major driver for the economic growth and social progress of any country is its construction sector. In India, it is estimated that construction contributes 8% to 9% to GDP and this share is likely to increase in coming years. High-performance concrete made from ordinary Portland cement (OPC) and various supplementary cementitious materials (SCM) are alarmingly finding their use in construction worldwide. Bagasse ash (BA), one such SCM, the agro-industrial …
Published in International Journal of Construction Engineering and Planning · Vol. 8, Issue 2, 2022 · pp. 51–62 Read article
-
Innovative Concrete Composites: Assessing Mechanical Strength with Fly Ash, Glass, and Granite Waste Incorporation
Abstract: Waste management poses a significant challenge for countries in both current and future contexts. The generation of solid waste from various industries, such as stone, glass, coal, and tires, constitutes a major issue in India, leading to significant environmental and health concerns for the surrounding population. This study addresses these challenges by exploring the utilization of waste granite and glass powder as materials to replace sand and cement, respectively, with …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 2, 2023 · pp. 37–45 Read article
-
A Review on the Use of Nano-Silica in Cementitious Compositions
Abstract: With the advent of nanotechnology, the material properties of the concrete industry, allows engineers and architects to use various materials in structural applications that were once impossible. Nowadays, the researchers are mainly focusing on the basic technology of cementitious material at nano/atomic level. The researchers are continuing to improve the durability and sustainability of concrete and have realised significant enhancement in mechanical properties of nano-silica incorporated cementitious materials. This review …
Published in International Journal of Concrete Technology · Vol. 1, Issue 1, 2015 · pp. 1–15 Read article
-
Fracture and Failure of Recycled Aggregate Concrete (RAC) – A Review
Abstract: In the world, many countries put into effect the renewal plans and/or the laws and/or the regulations for recent engineering structures which have reached their lifetime, are risk prone and have been built lacking quality engineering, or without considering urban planning. Hence, many structures are demolished and this situation increases the amount of construction and demolition waste (C & DW). Also, resource consumptions are rapidly increased due to excessive constructional …
Published in International Journal of Concrete Technology · Vol. 1, Issue 1, 2015 · pp. 31–48 Read article
-
Effect of Colloidal Nanosilica on High Strength Rice Husk Ash Concrete
Abstract: Nowadays, supplementary cementitious materials (SCMs) are used in concrete because it reduces CO2 emission during. The husks, which are production of cement, reduces cement contents, improve workability, increase strength and enhance durability. Pozzolanic reaction takes place when siliceous or aluminous material comes in contact with calcium hydroxide in the presence of moisture to form compounds possessing cementitious properties approximately 50 percent cellulose, 30 percent lignin and 20 percent silica, are …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 33–43 Read article
-
Utilization of Waste Plastics as a Fiber in Concrete
Abstract: The rapid urbanization and industrialization all over the world has resulted in large deposition of plastic waste. Disposal of plastic waste in an environment is considered to be big hazard due to its very low biodegradability and presence in large quantities. In order to minimize the problem, the proposed concrete which is made by adding plastics in concrete may help to reuse the plastics and to study the properties of …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 56–60 Read article
-
Experimental Investigation On Partial Replacement Of Fine Aggregate By Wood Ash On Concrete
Abstract: This paper intends to investigate the possibility of producing low costs enhanced performance concrete by wood ash. By taking the enormous amount of sand in river beds, it affects the environment badly and demand for fine aggregate is increase day by day. So by partially replacing Prosopis juliflora ash with fine aggregate in construction field, It can serve both the purposes of meeting the demands of construction industry and at …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 10–16 Read article
-
Aerocon Bricks
Abstract: Various low-cost housing projects are considered by a growing demand chiefly due to urbanisation. The collection of building materials should chance the requirements of local conditions to enhance quality of life for the most needed ones by building new structures and/or by improving existing structures. Various studies showed that a big variety of wall materials have been used in different building systems with traditional and modern construction methods, but only …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 37–48 Read article
-
Effect of Accelerated Curing and Normal Curing Regimes on UFGGBFS-Based Semi-Lightweight Concrete
Abstract: This paper deals with the performance of semi-lightweight concrete (sLWC), prepared by using calcite powder pellets as coarse aggregates which was improved by partial replacement of cement with UFGGBFS (ultrafine ground granulated blast-furnace slag). Cement could be replaced by UFGGBFS as 0%, 5%, 10%, 15%, 20%, 25%, 30%, 35%, 40%, 45%, 50%, 55%, 60%, 65%, and 70% to enhance the strength and durability properties of concrete. High-range water-reducing admixtures (HRWA) …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 1–7 Read article
-
Impact of Additives on the Split Tensile Strength of Roller Compacted Concrete
Abstract: Additives are implemented as partial replacement of Portland cement in concrete to enhance the required physical properties. In the present investigation, roller compacted concrete slab samples were prepared using gap and dense aggregate gradation. Three percentages of Portland cement were adopted, (16, 12, and 10) % by weight of aggregates. Three types of additives, (hydrated lime, fly ash, and fumed silica) were implemented as partial substitute of Portland cement. Core …
Published in International Journal of Concrete Technology · Vol. 7, Issue 2, 2021 · pp. 9–15 Read article