Search
1474 articles for “experience”
-
Experimental Study on Effects of Moisture and Clay Content on the Properties of Moulding Sand
Abstract: Sand casting, a time- honoured technique for casting both ferrous and nonferrous metals, remains widely utilized due to its cost-effectiveness, material abundance, and reusability, particularly with sand as a primary resource. This study delves into the intricate dynamics of sand casting, examining its crucial parameters through meticulous analysis of existing research. The investigation focuses on the influence of factors such as sand composition, moisture levels, clay content, and binder type …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 10, Issue 1, 2024 · pp. 16–25 Read article
-
Computational modeling and experimental investigation of using vibration to mixing and separation of a gas bubbles and a liquid in reduced and microgravity conditions
Abstract: The main purpose of the present research is the computational modeling of the gas bubbles behavior in the vibrating fluid under reduced and microgravity conditions. The manuscript presents the results of work of the developed computer model of the gas bubbles behavior in the vibrating fluid under reduced and microgravity conditions, and the experimental investigation of using vibration to mixing and separation of a gas bubbles and a liquid in …
Published in International Journal of Analytical and Applied Chemistry · Vol. 4, Issue 1, 2018 · pp. 1–7 Read article
-
Experimental Studies on the Surface-Driven Microfluidic Flow of Dyed Ethylene Glycol in Polymer Microfluidic Devices
Abstract: In this experimental work, three individual microfluidic devices are fabricated by polymethylmethacrylate (PMMA) using maskless lithography, hot embossing lithography and direct bonding technique. Straight microchannel having uniform width along entire channel length is the chosen design of microchannels before fabrication. Dyed ethylene glycol is prepared and used as working liquid. Effect of channel aspect ratio on surface-driven capillary flow of dyed ethylene glycol is studied. CMOS camera is used to …
Published in International Journal of Analytical and Applied Chemistry · Vol. 6, Issue 2, 2020 · pp. 17–22 Read article
-
Investigating study on flux enhancement techniques in a Nanofiltration pilot plant – An Experimental overview
Abstract: Water consumption and utilization in chemical allied industries is increasing progressively and global availability of fresh water is reducing. Reclamation of water from various industrial waste streams is play very vital role to overcome the current situation of water scarcity. Various conventional treatment methods are available for water reclamation. The performance of the membrane separation process, in terms of flux and rejection of membrane is directly influenced by the resistances …
Published in International Journal of Chemical Separation Technology · Vol. 4, Issue 2, 2018 · pp. 27–34 Read article
-
Experimental Study on Synthesis of Shear Thickening Fluid
Abstract: A novel class of nanosuspension material called shear thickening fluids (STFs) are created by dispersing micro- and nanoparticles in a dispersant. It is an intelligent material with excellent performance. When a modest shear rate is used, STFs are easily distorted. A material with noticeably improved characteristics is produced by this mixture (STF) of flowable and rigid components at a certain composition. Silica nanoparticles dispersed in a liquid polymer solution were …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 8, Issue 2, 2022 · pp. 1–6 Read article
-
AN EXPERIMENTAL STUDY ON HAZARDS OF TOBACCO CHEWING AMONG LABORS IN JAIPUR DISTRICT RAJASTHAN
Abstract: An experimental study conducted on the risks of chewing tobacco among the jobs that work in Jaipur. The aim of the study is to evaluate the effectiveness of planned planned instructions (PTP) in the knowledge of the dangers of chewing tobacco and to raise awareness about the dangers of chewing tobacco among people. The 60 works were selected through an intentional factory sampling technique in Jaipur and the tool was …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 4, Issue 1, 2018 · pp. 28–31 Read article
-
Experimental Study on Partially Replacement of Fine Aggregate & Coarse aggregate by Waste Marble with addition of S-Fiber
Abstract: Today’s world is a concrete jungle. With the ever increasing population of the world, in general and the developing countries there is the tremendous pressure on the Civil Engineer to develop a cost effective as well as ecofriendly structure to fulfill the need of the human being. Concrete is a heterogeneous mixture of binding material (cement or lime), coarse aggregates, fine aggregates (sand) and water. Fine and coarse aggregates are …
Published in International Journal of Concrete Technology · Vol. 5, Issue 2, 2019 · pp. 1–9 Read article
-
Experimental Study on Behavior of various FRP on strength properties of concrete
Abstract: Fibre sheeting is an effective way to repair structures that have become essentially fragile greater than their living expectancy. A lot of research is currently being done on the use of fibre sheets and overlays all around the world. In comparison to traditional repair frameworks and materials, FRP frames are a more cost-effective option. The purpose of this study is to experimentally investigate the behavior of GFRP, CFRP, and BASALT …
Published in International Journal of Concrete Technology · Vol. 8, Issue 2, 2022 · pp. 9–13 Read article
-
Experimental Investigation of Concrete Properties for Strength and Durability with Partial Replacement of Mixture of Nano-Silica
Abstract: This study explores the effects of partial cement replacement with nano-silica on theproperties of concrete, focusing on both strength and durability aspects. Compressive strengthtests were conducted at two key ages, 7 days and 28 days, to evaluate the concrete's performanceunder various conditions. The nano-silica was introduced into the concrete mix at three differentpercentages: 0.3%, 0.6%, and 1% by weight of the cement content. Our experimental findingsindicated a remarkable enhancement in …
Published in International Journal of Concrete Technology · Vol. 9, Issue 2, 2023 · pp. 1–7 Read article
-
Experimental Analysis on Improving the Soil Characteristics by Stabilization of Black Cotton Soil Using Coir or Coconut Fibre
Abstract: One of the most widely utilized methods for improving poor soils is soil reinforcement. Metal strips,natural and synthetic fibers arranged randomly, geogrid sheets, synthetic and natural geotextiles, andmetal strips are examples of materials used for soil reinforcement. Additionally, the tensile strength,shear strength, other characteristics, bearing capacity, and economy are all significantly improved bythe soil reinforcement. The utilization of jute fibre in civil engineering is beneficial for enhancing soilqualities due to …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 9, Issue 2, 2023 · pp. 29–36 Read article
-
Experimental Investigation on Axially Loaded AASC and TVC Square Columns
Abstract: In this present project, an experimental investigation was carried out to study the behaviour of alkali-activated slag concrete (AASC) and traditionally vibrated concrete (TVC) columns under axial loading. The dimensions of the columns were 150 mm × 150 mm × 1219 mm to mimic the short column behaviour. The longitudinal steel ratio was varied for the specimens. Different criteria such as load deformation behaviour, compression stiffness and surface strain were …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 1, 2019 · pp. 8–17 Read article
-
Experimental Study of Self –Healing in Reinforced Concrete Flexural Elements
Abstract: Concrete structural elements undergo cracking under tensile stresses which can adversely affect the performance of these members. The increased availability of design solutions facilitating the self-healing of the cracked concrete elements can lead to the enhancement of the service life of concrete structures. This paper presents the findings of an experimental study where shape memory materials such as Constantan and Nitinol wires have been used in flexural concrete elements. Tests …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 2, 2019 · pp. 12–24 Read article
-
Development of a Rutting Model for Bituminous Mixes Using Experimental Data
Abstract: In recent years, the amount and severity of rutting on bituminous pavements in India has been increasing due to the ever increasing traffic volumes, overloading and the high summer temperatures. Extensive research work has been directed throughout the years for creating models to predict the advancement of rutting in bituminous mixes and pavements, yet with restricted achievement. The laboratory rutting tests were conducted on bituminous mixes prepared with various aggregate …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 5, Issue 2, 2019 · pp. 1–5 Read article
-
Experimental Assessment of Durability of Asphalt Pavement Surfacing Modified with Fly-Ash Under Moisture Submergence
Abstract: The impact of environmental factors such as moisture and temperature cycles together with traffic loads and configurations on pavement combined with the need for improved construction materials have made it pertinent for research into better ways to enhance asphalt pavement properties for better performance. This study adopts an experimental approach using the Marshall Mix design method to investigate the effect of fly-ash in the enhancement of asphalt pavement wearing course …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 6, Issue 2, 2020 · pp. 1–9 Read article
-
Experimental Study on Scour Around T-Head Groynes in Open Channel
Abstract: Groynes are the river training structures which are used extensively in anti-erosion activities. An experimental investigation of scouring around the groynes in an open channel is presented in this paper and an attempt to analyze the behavior of T-shaped groynes in terms of its applicability in alluvial channels was made. Tests were conducted by varying the symmetry of flange in three different manners (symmetric, larger flange in upstream and downstream …
Published in International Journal of Water Resources Engineering · Vol. 4, Issue 1, 2018 · pp. 33–39 Read article
-
Experimental Background, Designs and Bioengineering Applications of Microfluidic Immunosensor Devices
Abstract: In this short review, the microfluidic Immunosensor devices are briefly reviewed. In the last few years, the experimental techniques have been developed to immobilize the antibodies and other relevant molecules. Also, surface modification techniques have been developed to resist the non-specific adsorption. Fluorescence and electrochemistry are used as detection methods. In future, the microfluidic Immunosensor devices will be used for better sensitive detection, miniaturization, increased integration, multianalyte analysis and many …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 4, Issue 1, 2018 · pp. 6–9 Read article
-
Experiments on the Passive Capillary Flow of Aqueous Ethanol in Sudden Expansion Microchannels towards the Applications in Nanofluidics and Nanoelectromechanical Systems
Abstract: In this work, total three individual sudden expansion microchannels are designed and fabricated by maskless lithography, hot embossing lithography and direct bonding technique inside the cleanroom laboratory. Polymethylmethacrylate (PMMA) is used as the selected polymer to fabricate these microchannels. Aqueous ethanol (15% ethanol, 85% dyed water) is prepared and used as dyed working liquid. Surface-driven (passive) capillary flow of prepared working liquid is recorded by a CMOS camera corresponding to …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 1, 2020 · pp. 15–22 Read article
-
Effect of Abrasive Water Jet Machining Parameters—An Experimental Investigation
Abstract: Machining studies on the fiber reinforced polymer composites is vital requirement for the composites application in different fields. Particularly advanced machining techniques like abrasive water jet machining can be machined with higher accuracy and distortion free composites. In this work aims to study the abrasive machining parameters on the basalt fiber polymer composites. The woven basalt fiber reinforced polymer composites were prepared using hand layup techniques. The machining effect of …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 2, 2020 · pp. 21–23 Read article
-
Experimental Analysis on the Characteristics of Gas Turbine Blade Materials
Abstract: Gas turbine technology is gaining importance and has become viable option in most of the applications in view of depleting fossil fuels. Material research has widened the scope and life of gas turbines with improved performance. Present work experimentally studies about the characteristics of different materials that can be used in gas turbines and in particular, turbine/compressor blades. Nickel, Titanium and steel alloys of different metal compositions are selected. Hardness …
Published in International Journal of Composite Materials and Matrices · Vol. 2, Issue 2, 2016 · pp. 19–23 Read article
-
Experimental Investigation of Visco-Elastic Behavior for Ecovio F Film C2203 Biopolymer Melts
Abstract: The visco-elastic behavior of biopolymers fluid are significantly interested in their internal structure, thus, it has been experimentally investigated for various industrial applications. This paper studies the characterization of (Ecovio F Film C2203) biopolymer because of their characteristics and importance in different fields of environment and health. Two form of rheometers instruments have been used at temperatures between (140 - 220) ˚C to describe the visco-elastic behavior of (Ecovio F …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 2, 2018 · pp. 24–33 Read article