Search
1368 articles for “Enhancement”
-
Effect of impurity metal (Fe, Co, Ni) on WSex as good hydrogen evolution catalyst
Abstract: Transition metal chalcogenides are recognized as a category of very promising non-expensive and earth-abundant catalysts for Hydrogen evolution reaction (HER) catalysts. Many literature reports appeared recently on metal selenides due to excellent phyco-chemical properties and for HER, this mini review attempt to give some insight on effect of Fe, Co, Ni to WSex toward efficiency of HER. From the literature report showed that presence of impurities activity with WSex following …
Published in International Journal of Energetic Materials · Vol. 6, Issue 2, 2020 · pp. 31–36 Read article
-
Use of Nano-additives in Rubber Compounding: A Review
Abstract: Rubber nanocomposites nowadays find an important position both in academic and industrial point of view and extensive research work is under way in this area. Due to their ever-growing significance of nano-additives, thorough investigation becomes necessary especially for their applications in various industries. Due to enhanced surface area and high aspect ratio of nanomaterials results in superior matrix/filler interaction and lead to superior and versatile properties in wide range of …
Published in International Journal of Energetic Materials · Vol. 7, Issue 1, 2021 · pp. 40–47 Read article
-
Study of Isotropic Property
Abstract: This article is constitutive from as forged as well compounded form. Isotropy is uniformity in various orientations. Isotropy is composed of Greek isos meant by equal and tropos meant by way. Precise definable consequence is subjective to depend on material property i.e., same when tested in different directions. A common example of isotropy is inclusive as of glass, plastics, and metals. Alter subject area is studied as inequality, given by …
Published in International Journal of Energetic Materials · Vol. 7, Issue 2, 2021 · pp. 1–7 Read article
-
Corrosion and Corrosion Protection of Carbon Steel
Abstract: Carbon steel is a very important metal for petroleum industries. Petroleum refineries are used bulk amount of carbon steel for purification of crude oil. Some amount of carbon dioxide and sulphur dioxide present in crude oil. Both gases are acidic in nature so they generate hostile medium for metal. These gases convert into carbonic and sulphuric acid and develop electrochemical cell on the surface of metal and aggravate corrosion reaction. …
Published in International Journal of Energetic Materials · Vol. 9, Issue 1, 2023 · pp. 28–35 Read article
-
A Brief Review of Simonkolleite Nanoparticles: Synthesis, Characterizations, and Their Transformative Impact Across Industries
Abstract: The rapid progress in nanotechnology has ignited a quest for innovative materials tailored to specific application needs or designed to enhance particular characteristics. Among these, simonkolleite, a zinc-based material, has emerged prominently in scientific discussions due to its promising properties with diverse medical, health, and environmental applications. This systematic review delves into the extensive literature on simonkolleite, unraveling its myriad applications across various fields. Often associated with ZnO-related research, Simonkolleite …
Published in International Journal of Energetic Materials · Vol. 9, Issue 1, 2023 · pp. 36–47 Read article
-
Analysis of Mechanical and Corrosion Properties of AISI50110 (EN31) Steel With and Without Heat Treatment
Abstract: The mechanical properties of steel decide its applicability for a particular condition. Heat treatment processes are commonly used to enhance the required properties of steel. The material was machined to ASTM standards and then different tests like microstructure analysis, hardness test, impact test, etc. were carried out after the heat treatment processes. All the tests were carried out in the mechanical workshops and laboratories under the supervision of their respective …
Published in International Journal of Metallurgy and Alloys · Vol. 1, Issue 1, 2015 · pp. 24–41 Read article
-
Metallurgical and Machinability Characteristics of Wrought and Selective Laser Melted Ti-6Al-4V
Abstract: This examination work shows a machinability ponder between created review titanium and specific laser softened (SLM) titanium Ti-6Al-4V in a face turning operation, machined at cutting paces in the vicinity of 60 and 180 m/min. Machinability attributes, for example, device wear, cutting powers, and machined surface quality were examined. Covering delamination, attachment, scraped spot, steady loss, and chipping wear instruments were overwhelming amid machining of SLM Ti-6Al-4V. Greatest flank wear …
Published in International Journal of Metallurgy and Alloys · Vol. 3, Issue 1, 2017 · pp. 9–12 Read article
-
Relevance and Utilization of Copper and Copper Alloys
Abstract: Copper is the oldest metal used by man. It is use dates back to prehistoric times. Copper has been mined for more than 10,000 years with a Copper pendant found in current day Iraq being dated to 8700 BC. By 5000BC Copper was being smelted from simple copper oxides. The combination of physical properties such as strength, conductivity, corrosion resistance, machinability and ductility make Copper suitable for a wide range …
Published in International Journal of Metallurgy and Alloys · Vol. 3, Issue 2, 2017 · pp. 11–16 Read article
-
Characterization and Wear Behavior of TiN, TiAlN, TiCrN and AlCrN PVD Coatings Deposited onto AISI H13 Hot Forging Die Steel
Abstract: Four Nitride coatings TiN, TiAlN, TiCrN and AlCrN were deposited onto AISI H13 hot work die steel by cathodic arc evaporation physical vapour deposition (PVD) technique. The coatings were characterized by SEM, SEM-EDS, XRD, line scan EDS and X-Ray mapping tests and micro hardness tester. The wear characteristics were investigated using a pin on disc method at high temperature and speed against En-31 bearing steel disc. It was observed that …
Published in International Journal of Metallurgy and Alloys · Vol. 4, Issue 2, 2018 · pp. 1–11 Read article
-
Root Cause Analysis and Maintenance in Mechanical Systems
Abstract: Due to lots of noise and failures in transmission system, for maintaining the status of products and services provided by any organisation it is very much necessary to improve the failure parts. The mechanism that transmits the power developed by engine of automobile to the engine to the driving wheel is called the Transmission System and it includes Clutch System, Gear Transmission System and Differential system. In the present work …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 1, 2019 · pp. 26–29 Read article
-
Effects of Tungstate and Nitrite Ions as Corrosion Inhibitor for Cr-10Zr-10W Alloy in 0.5 M NaCl Solution
Abstract: The effect of different concentrations of tungstate and nitrite ions as corrosion inhibitors on the corrosion behavior of the sputter-deposited ternary Cr–10Zr–10W alloy was studied in 0.5 M NaCl solution open to air at 25±1°C using corrosion tests and corrosion potential measurement. The use of both the tungstate and nitrite ions enhanced the corrosion resistance properties of the alloy in 0.5 M NaCl solution. It is found that the tungstate …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 1, 2019 · pp. 11–19 Read article
-
Assessment on the Effecs of Sodium Salts of Tungstate and Nitrite as Green Inhibitor for the Corrosion of Cr–5Ni–53W Alloy in 0.5 M NaCl Solution
Abstract: Corrosion inhibition effect of sodium salts of tungstate and nitrite on the sputter-deposited ternary Cr–5Ni–53W alloy was investigated in 0.5 M NaCl solution open to air at 25±1 °C using corrosion test, inhibition mechanism and corrosion potential measurement. The use of sodium salts of both the tungstate and nitrite enhanced the corrosion resistance properties of the ternary alloy in 0.5 M NaCl solution, mostly due to tungstate and nitrite ions …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 1, 2020 · pp. 25–36 Read article
-
Study the Corrosive Effect of Greenhouse Gases on Metallic and Non-metallic Materials
Abstract: Carbon dioxide is a major corrosive pollutant for building materials. It enters inside materials by diffusion or osmosis process and in presence of moisture it produces H2CO3 which decrease the pH value and accelerates chemical and electrochemical reaction with building materials. The carbonation reaction produces deterioration inside and outside of building materials. It produces corrosion reaction with metallic bar and disbanding with concrete. CO2 reacts with Ca (OH)2 and Mg(OH)2 …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 2, 2021 · pp. 17–28 Read article
-
Sustainable Metallurgy: Recycling and Eco-friendly Practices in Alloy Production
Abstract: The modern metallurgical industry faces a growing imperative to adopt sustainable practices to mitigate environmental impacts and conserve natural resources. This paper explores the advancements in sustainable metallurgy, emphasizing recycling and eco-friendly practices in alloy production. Key strategies include the development of closed-loop recycling systems, where end-of-life metal products are efficiently reprocessed to minimize waste and reduce the need for virgin raw materials. Innovations in alloy design, such as the …
Published in International Journal of Metallurgy and Alloys · Vol. 9, Issue 2, 2023 · pp. 18–23 Read article
-
Corrosion Resistance in Modern Metallurgical Alloys: Mechanisms & Mitigation Strategies
Abstract: Corrosion resistance in metallurgical alloys is a critical factor in their application across various industries, including aerospace, automotive, marine, and construction. This paper delves into the fundamental mechanisms of corrosion, such as galvanic, pitting, crevice, intergranular, and stress corrosion cracking, which significantly affect the longevity and reliability of alloys. It explores the intrinsic and extrinsic factors influencing corrosion behavior, including alloy composition, microstructure, environmental conditions, and mechanical stresses. Advancements in …
Published in International Journal of Metallurgy and Alloys · Vol. 9, Issue 2, 2023 · pp. 30–34 Read article
-
Floral System Act as a Reservoir for Nanobiotechnology (Silver Nanoparticles)
Abstract: The coming era of Nanotechnology is considered the first book on the topic of nanotechnology. It consists of processing of separation, consolidation and deformation of materials by one atom or by one molecule. There are two main approaches used in nanotechnology such as 1) “bottom-up” approach in which materials or devices are built from components and assemble themselves chemically by the principles of molecular recognition 2) “top-down” approach reflects the …
Published in International journal of Nanobiotechnology · Vol. 1, Issue 1-2, 2015 · pp. 5–7 Read article
-
Saccharomyces cerevisiae and Its Usage in Electricity Generation
Abstract: The reasonable, practical and vitality productive wastewater treatment remains an inquisitive worry among researchers. Microbial power device (MFC) can offer such rich arrangements. MFC is an electrochemical framework that proselytes substance vitality of concoction mixes into power through metabolic exercises of microorganisms. MFCs are financially savvy approach for wastewater treatment because of expulsion of contaminants from wastewater while in the meantime delivering electrical force. The wastewater, which is a wellspring …
Published in International journal of Nanobiotechnology · Vol. 2, Issue 1, 2016 · pp. 5–9 Read article
-
Nano Finishing of HDPE/Al2O3/HAp Ternary Composite Based Acetabular Socket using Polymer Rheological Abrasive Semisolid Medium
Abstract: Acetabular socket is one of the important parts of the hip joint. The surface roughness in the acetabular socket decides the friction and wear during the motion of the human. Low surface roughness in the acetabular socket gives free motion of hip joint as well as high joint life. Nano surface roughness on the inner surface of acetabular socket also reduce the particles generation during the dynamic motion between hip …
Published in International journal of Nanobiotechnology · Vol. 2, Issue 2, 2016 · pp. 5–8 Read article
-
Nanotechnology based solutions for control of Agricultural pests
Abstract: Application of nanotechnology for the control of agricultural pests is an emerging field of research. It is driven by the realization that they are more effective and are equally competent in terms of their biocidal potential and that too at significantly low concentrations as compared to conventional pesticides. Unscrupulous application of larger volumes of chemical pesticides has many harmful effects including, acute toxicity to animals and human beings (up on …
Published in International journal of Nanobiotechnology · Vol. 3, Issue 2, 2017 · pp. 7–13 Read article
-
Advancement in Nanodiagnostic for Plant Pathogen Detection
Abstract: Nanotechnology refers to a nanoscale innovation, which has promising applications in everyday life. The word nanotechnology is generally used when referring to materials with the size of 0.1 to 100 nanometers. Nanotechnology is a multi-displinary science involving knowledge fro biology, chemistry, physics and other disciplines. The nanoparticles have small size, large surface area and high reactivity. These properties of nanoparticles revolutionized the agriculture researches. Rapid disease detection, targeted treatments, enhancing …
Published in International journal of Nanobiotechnology · Vol. 4, Issue 2, 2018 · pp. 1–7 Read article