Search
1604 articles for “analysis”
-
Use of Recycled Aggregates in Concrete to Achieve Characteristic Strength M50 with Addition to Steel Fibre
Abstract: Concrete is World’s second most consumed material after water, use of recycled aggregate (RA) in concrete can be useful for environmental protection. Recycled aggregates are the materials for the future. Aggregate is one of the main ingredients in producing concrete. It covers 75% of the total for any concrete mix. The strength of the concrete depends on the properties of aggregates used. The experimental analysis comprise with normal RAC and …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 1–8 Read article
-
Effect of Elevated Temperature on Compressive Strength and Flexural Strength of Fiber Reinforced Concrete
Abstract: Now a day concrete is being used extensively in the construction that might be subjected to elevated temperatures. The behavior of concrete structures at elevated temperatures is significant importance in predicting the safety of structures in response to certain accidents or particular service conditions. This paper deals with the mechanical properties of concrete with steel fibers subjected to temperatures up to 500°C. The specimens were kept in oven for 1 …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 19–32 Read article
-
Concrete Quality Evaluation Using Non-destructive Test
Abstract: This paper analyses the non-destructive testing (NDT) measurements used to assess on site strength and condition of reinforced concrete. To ascertain the residual strength of concrete, extent of corrosion, it is imperative to assess the health of the RC structural members of a building using State-of-the-art non-destructive testing (NDT). NDT of concrete structure is carried out in order to assess the health of structure without impairment of its desirable properties. …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 1–4 Read article
-
Effect of magnetic pole direction on the properties of magnetized water concrete
Abstract: This project aimed to study the variations in properties of concrete when magnetized water was being used instead of normal water, and also compare the effect of the magnetic pole on magnetized water concrete. In this research, based on reviewed literature, magnetized water was prepared by filling a glass beaker with water and then placing magnets at the sides of the container for the required number of hours. Sieve analysis …
Published in International Journal of Concrete Technology · Vol. 6, Issue 1, 2020 · pp. 16–22 Read article
-
DETAILED STUDY ON THE PROPERTIES OF PLASTIC CONCRETE CUTOFF WALL MATERIALS MIXED WITH WATERPROOFING ADMIXTURES
Abstract: This study presents the results of a comprehensive experimental work performed to characterize the mechanical and hydraulic properties of plastic concrete materials added with water-resisting and crystalline admixture as Permeability Reducing Admixture for Hydrostatic conditions (PRAH). The mechanical properties, deformation, permeability nature, triaxial stress-strain curve, hydration products, phase composition, and pore structure of plastic concrete with various proportions of PRAH were investigated. In addition to that, retarding admixture was used …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 1–15 Read article
-
Application of Suitable Admixtures (Lime and RHA) for Improvement of Pavement Subgrade
Abstract: Abstract The quality of a pavement depends on the strength of its sub-grade. The present investigation has been carried out with easily available materials like lime and rice husk ash mixed individually and in combinations with different proportions. The different percentages of lime with respect to weight of dry soil were 2%, 4%, 6%, 8% 10% and for rice husk ash (RHA) were 3%, 6%, 9% and 12%. In each …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 1, Issue 2, 2015 · pp. 14–31 Read article
-
Under Water Blasting for Rock Dredging & Protection of Structures: A Case Study
Abstract: Rock dredging in ports involves under water blasting for the pretreatment of hard sea bed. A rock dredging project covering an area of about 257,058m2 involving 400,000 cu.m of hard Khondalite rock mass was taken up in a port in the east coast of Southern India, for deepening of Turning Circle and Inner Harbour Channel. Pre-blast survey was carried out to assess type and condition of various structures standing on …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 2, Issue 1, 2016 · pp. 31–38 Read article
-
Study of Seismic Forces by Changing the Location of Lift Core
Abstract: An important element for strengthening of structure is lift core in earthquake prone area (Mw=6.5 or more). Major content in this paper is use of lift cores to resist the seismic forces and its effect by changing the lift core location. The study for G+5 and G+10 type frame buildings are taken under study. These buildings are further subdivided as per strata type. Centre core and Corner core are locations …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 2, Issue 2, 2016 · pp. 1–9 Read article
-
Prediction and Assessment of Lateral Displacement of Rock Mass Along the Length of the Horseshoe Cavern – A Numerical Modelling Approach
Abstract: The stability of the underground structures is a key to successful underground mining. Caverns are large underground openings constructed in rock mass for a variety of purposes. The properties of intact rock mass are generally overshadowed by the properties of discontinuities, if the discontinuities are present. Mechanisms of deformation and failure of underground openings in jointed rock mass are determined by the characteristics of the geometrical distribution of discontinuities. This …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 1, 2017 · pp. 17–28 Read article
-
Application of High Speed Videography and Digital Image Processing Software to Assess Performance of Blasts In Opencast Mines: A Case Study
Abstract: Rock mass can be fragmented by the process of blasting in which a known volume of the yield is obtained by using a calculated quantity of explosive. The explosive selected for blasting depends on factors like rock mass parameters, blasting economics and blast design. Assessment of the performance of a given blast is essential in the larger economics of the mining project. A study was conducted to know the blast …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 2, 2017 · pp. 1–9 Read article
-
Landslide Monitoring, Detection and Warning System by Wireless Sensor Network (WSN)
Abstract: Wireless sensor network (WSN) is one of the most hopeful field and has uncountable applications in the real-time systems. Execution of WSN in real-time system for landslide detection and warning system is discussed in the present paper. Sliding of rocks and soil is called landslide. It is triggered mostly because of heavy rainfall or melting of snow and can cause loss of lives and property. Using real-time monitoring the landslide …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 2, 2017 · pp. 24–28 Read article
-
Analytical study of CFST Columns at different Temperatures under Monotonic loading using Abaqus Software (CC & LWC infill)
Abstract: This paper presents, Behaviour of Conventional & Lightweight Concrete-Filled Steel Tube under monotonic loading at different temperatures is investigated using finite element method (Abaqus version 6.13.0.). The parameters chosen for the study are the geometry of the specimen – circular section, different L/D ratios, different grades of conventional & lightweight concrete infill and different temperatures (30°C, 60°C, 90°C, and 120°C). The study includes an analytical investigation into a total of …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 1, 2019 · pp. 43–52 Read article
-
Soft Computing Based Prediction of Ultimate Bearing Capacity of Footings Resting on Rock Masses
Abstract: The present study attempts to predict the ultimate bearing capacity of shallow foundations on rock masses using five different soft computing techniques namely i) random forest regression approach, ii) artificial neural networks, iii) support vector machine with polykernel, iv) support vector machine with (radial basis function) RBF kernel and v) M5P model tree. The ultimate bearing capacity was assumed to be dependent rock mass rating, unconfined compressive strength of rock, …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 2, 2019 · pp. 1–14 Read article
-
PLASTICITY EVALUATION ON THE HETEROGENEITY OF SAND AND SILTY CLAY FORMATION IN DELTAIC ENVIRONMENT
Abstract: This paper evaluates the level of heterogeneity impact of atterberg limit of the formation; the study analyzed eight locations to determine their plastic limit, liquid limits and plastic index, values generated from different location reflect the behaviour of sand and silty clay base on the experimental data, fluctuation were experiences from 0.2 – 2.5m in all the locations, it generated the lowest and the highest range from LL30-45, PL, 21-31, …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 2, 2019 · pp. 15–22 Read article
-
THE STRENGHT PARAMETERS OF SAW-DUST ASH ON THE GEOTECHNICAL PROPERTIES OF LATERITIC SOIL FOR ROAD CONSTRUCTION PURPOSES IN GHANA
Abstract: The strength parameters of saw dust ash on the geotechnical properties of lateritic soil for road construction purposes in Ghana have been investigated. The lateritic soil sample collected was subjected to the following test; Atterberg limits, compaction and California Bearing Ratio Test. The tests were conducted in accordance with BS: 1377 and AASHTO M145 standards. A varying percentage of the saw dust ash in order of 2%, 4%, 6%, 8% …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 6, Issue 1, 2020 · pp. 1–9 Read article
-
Modelling of Twin Underground Caverns using 3DEC: A Case Study
Abstract: India is poised to create large underground caverns, for storing crude oil and LPG. Presently there are three such facilities. The dependence of the country on Crude oil and petroleum products requires creating large underground caverns, from the strategic point of view. An attempt is made to present a case study of the stability of Twin Caverns driven adjacent to each other in Southern India. The host rock is granitic …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 8, Issue 1, 2022 · pp. 1–13 Read article
-
Assessing the Impact of Soil-Structure Interaction on Seismic Performance of Step Back and Set Back Buildings on Sloping Ground
Abstract: When constructing framed structures on sloping ground, either step back or step back and set back configurations are typically adopted. Due to the varying heights of columns towards the slope and the unsymmetrical nature of these buildings, they are subject to large forces such as shear forces, bending moments, torsional moments, and unequal distribution. In the past, it was common practice to assume that structures were fixed at the base, …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 8, Issue 2, 2022 · pp. 36–47 Read article
-
Analysing Seismo-electromagnetic Waves through Wavelet Transformation
Abstract: This research has presented a sophisticated methodology for studying lithosphere-ionosphere coupling phenomena, emphasising the identification of pre-seismic activity through seismo-electromagnetic signal processing. The application of an advanced electric field monitoring device, coupled with the precision of the Discrete Wavelet Transform (DWT), has allowed us to uncover nuanced patterns in the ULF range, specifically related to seismic events during the Kumamoto Earthquakes. The detailed statistical analysis further supports the significance of …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 9, Issue 2, 2023 · pp. 10–17 Read article
-
Flexure of Thick Fixed Beams Subjected to Varying Load using Shear Deformation Theory
Abstract: A refined shear deformation theory for flexural analysis of thick beams, considering transverse shear deformation effects, is developed. The number of variables as in the first order shear deformation theory is kept in present theory. The important feature of present theory is that the transverse shear stresses can directly be obtained using constitutive relations. The theory does not demand shear correction factors. The principle of virtual work is used to …
Published in International Journal of Structural Engineering and Analysis · Vol. 2, Issue 1, 2016 · pp. 23–31 Read article
-
Seismic Behavior of Soft Storey Building with Static and Dynamic Earthquake Loading
Abstract: Soft first storey is a typical feature in the modern multi-storey constructions in urban India. Though multi-storied buildings with soft storey floor are inherently vulnerable to collapse due to earthquake, their construction is still widespread in the developing like India. Functional and Social need to provide car parking space at ground level and for offices open stories at different level of structure far out-weighs the warning against such buildings from …
Published in International Journal of Structural Engineering and Analysis · Vol. 2, Issue 2, 2016 · pp. 1–7 Read article