Search
192 articles for “Metallic Materials”
-
Synthesis and Characterization of Nickel Doped BFO Nanoparticles
Abstract: In the present, work we have synthesized the pure and Nickle doped bismuth ferrite at different concentration by the chemical route method. Increasing in the doping concentration leads to generation of secondary phase, thus dopant concentration is maintained to 5mol%. XRD was used to confirm the phases transformation of nanocrystalline composite materials along with measurement of the crystallite size. Scanning electronic microscopy (SEM) was used to study the morphological properties …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 4, Issue 1, 2018 · pp. 17–29 Read article
-
Green Nanotechnology: Principal Role of Green Nanoparticles in Environmental Remediation and Wastewater Treatment
Abstract: A recent development in nanotechnology is green nanotechnology. The major concerns of this technology are improving health status, ensuring sustainable energy, ensuring sustainable environmental and green economy, and reducing waste. This research is, therefore, concerned with the role of green nanotechnology and the potential role of green nanoparticles in environmental remediation and wastewater treatment. This technology is expected to effectively treat contaminated water, heavy metal-containing water, and polymer waste. Green …
Published in International Journal of Applied Nanotechnology · Vol. 11, Issue 1, 2025 · pp. 1–8 Read article
-
Green Synthesis, Characterization and Antimicrobial Studies of Ni(II) and Cu(II) Schiff Base Complexes
Abstract: Solvent-assisted mechanochemical reaction was used to synthesize new transition metal complexes of Ni(II) and Cu(II) with Schiff base ligand (H2L) obtained from condensation of 2-hydroxy-1- napthaldehyde with 2 aminobenzimidazole. Melting point/decomposition temperature, solubility test, FT-IR, powder x-ray analysis, conductivity measurement, magnetic susceptibility, elemental microanalysis, and UV/VIS spectral investigations were used to characterize the Schiff base and complexes. The complexes are of varied colours and have sharp melting points, and they …
Published in International Journal of Green Chemistry · Vol. 8, Issue 1, 2022 · pp. 9–18 Read article
-
Analytical Computation and Finite Element Analysis of Failure Criterion of a Composite Hollow Driveshaft Under Torsion
Abstract: ABSTRACT Drive shafts for power transmission are used in many applications, including machine tool, cooling towers, pumping sets, aerospace, and automobiles. In the metallic shaft design, the size of the shaft’s cross-section can be determined by the value of torque and the allowable shear stress of the material. There has been extensive work on the design of hollow composite drive shaft as per the literature survey. Many have focused on …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 3, Issue 2, 2017 · pp. 1–14 Read article
-
A look at friction stir processing for making better surface properties
Abstract: Abstract Friction stir processing is a surface properties modification method consequential from friction stir welding. The process uses a non-consumable tool made up of tool steel material. The tool pin and shoulder plunged in the surface of the base material plates and it mover along the predetermined path. The frictional heat stimulates the plastic deformation during the process & enhances the dynamic recrystallization. The process represents an advanced approach that …
Published in International Journal of Manufacturing and Materials Processing · Vol. 11, Issue 2, 2025 · pp. 41–47 Read article
-
Effective Utilization of Agricultural Waste for Removal of Heavy Metals from Waste Streams
Abstract: The progress of industrialization and urbanization poses a great threat to the comfort of people's lives. The production and disposal of large amounts of toxic pollutants have severely polluted our environment. The most hazardous contaminants in soils and surface waters include some organic compounds, like synthetic dyes (SD) and toxic substances (heavy metals). It is of great interest worldwide due to its toxicity to many organisms. An important topic is …
Published in International Journal of Environmental Chemistry · Vol. 8, Issue 2, 2022 · pp. 1–11 Read article
-
Electroforming Technology for Advanced Metal Fabrication
Abstract: Electroforming technology is a highly specialized process for fabricating a metal part by electro deposition in a plating bath over a base form or mandrel which is subsequently removed. On a mandrel, also known as a mold or matrix, which is removed, metal is electrodeposited. As a result, the coating turns into the product. Intricate parts made of nickel, copper, gold, and silver, such as molds, dies, waveguides, nozzles, and …
Published in International Journal of Manufacturing and Materials Processing · Vol. 10, Issue 1, 2024 Read article
-
Cutting Tools with Graphene Coating and Its Uses
Abstract: Graphene attracts a certain interests because of its amazing properties like high temperature operations, high mechanical quality and greasing up properties and so forth. Arshi and Dighewar have examined to enhance surface unpleasantness, apparatus life and creation rate of materials by utilizing a defensive covering of titanium nitride (TiN) over steel devices.[1] They have acquired attractive results. In this paper, we utilize graphene as a covering on metal cutting apparatuses …
Published in International Journal of Applied Nanotechnology · Vol. 2, Issue 1, 2016 · pp. 24–26 Read article
-
Sorption of Pb (II), Cd(II) and Zn(II) by synthesized nanocrystalline sodium potassium flurophlogopite (FGP)
Abstract: We have successfully synthesized nanocrystalline sodium potassium fluorophlogopite (FGP) crystals with controlled sizes from ≈ 25 nm to 100nm, using an organic tetrapropylammonium (TPA) hydroxide. We have been successfully synthesized material depends on the source of silicate and hydrothermal crystallization conditions. The synthesized materials were characterized by using different techniques such as X-ray diffraction, Energy Dispersive Analysis, Scanning Electron Microscope, Transmission Electron Microscopy and FTIR analysis. The use of sodium …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 2, 2023 · pp. 41–49 Read article
-
Structural Efficiency and Sustainability of Bamboo Architecture: Material Performance, Joinery Techniques and Contemporary Applications
Abstract: Abstract Bamboo is increasingly recognised as a structurally efficient and environmentally responsible construction material, offering a viable alternative to conventional high-carbon materials such as steel, concrete, and engineered timber. Its rapid renewability, high tensile strength, low embodied energy, and favourable strength-to-weight ratio position bamboo as a key material for sustainable architecture in both vernacular and contemporary contexts. This paper presents a comprehensive assessment of bamboo architecture by examining material performance, …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 1, 2026 · pp. 48–55 Read article
-
Energy Conservation with use of Cool Roof Coatings
Abstract: Regions with hot and dry climate often experience very high levels of solar radiation, high ambient temperatures and relatively low specific humidity. The roofs of buildings in such areas are always exposed to Sun for long duration during the daytime. Solar radiation is responsible for heat transfer through the building roof. Actually, Solar radiation heat the roof which in turn reradiates the heat onto the ceiling and finally on to …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 2, Issue 2, 2016 · pp. 1–13 Read article
-
Tensile Strength of Welded Buttly Joints by Different Types of Welding
Abstract: In this study, an experimental method for the selection of optimal welding for joining metals there areseveral methods which they are used for joining metals, that it includes using welding brazing, MetalInert Gas (MIG) Welding and Gas Metal Arc Welding is an arc welding process, in which the weld isshielded by an external gas (Argon, helium, CO2, argon + Oxygen) or other gas mixtures is one of thewidely used techniques …
Published in International Journal of Mechanics and Design · Vol. 7, Issue 2, 2021 · pp. 30–34 Read article
-
Effects of Gate Oxide Thickness and Its Dielectric Strength in WS2 Based TMDFET
Abstract: This paper presents the numerical simulation of transition metal dichalcogenide based field effect transistor (TMDFET). Here we have studied the transfer characteristic, ION/IOFF ratio, subthreshold slope of TMDFET by varying oxide thickness and its dielectric strength dependence performance. The channel material used for field effect transistor is tungsten disulfide (WS2). To calculate the transfer (input) characteristics, we use Non Equilibrium Greens Function (NEGF). Results are achieved by solving the Poisson’s …
Published in International Journal of Energetic Materials · Vol. 5, Issue 1, 2019 · pp. 14–20 Read article
-
Investigating the Effects of Severe Plastic Deformation on Aluminium Alloy Properties: A Comparative Study
Abstract: Equal channel angular pressing is a metal forming process. It serves as a strengthening treatment through which ductile metals can be processed to refine their grain and subgrain structure. This process improves the mechanical performance of metals, including tensile strength, stress-controlled fatigue strength, and resistance to fatigue crack propagation. Equal channel angular pressing is one of the severe plastic deformation methods employed to produce ultrafine-grained materials. In this method, a …
Published in International Journal of Mechanics and Design · Vol. 12, Issue 1, 2026 · pp. 26–43 Read article
-
Comprehensive Review of Processes, Materials, Developments, and Challenges of Additive Manufacturing
Abstract: Abstract Additive Manufacturing (AM), or 3D printing as it is known widely, has evolved significantly from being a prototyping technology to an end-use production technique across different industrial sectors. This groundbreaking technology allows for the direct creation of intricate, user-designed, and high-performance components through sequential addition of material from digital models, which abolishes most of the design and production constraints of conventional manufacturing. Its application is underscored by its pivotal …
Published in International Journal of Manufacturing and Materials Processing · Vol. 11, Issue 2, 2025 · pp. 6–24 Read article
-
Unraveling the Health Risks of Microplastics in School Children Water Bottles: A Systematic Review
Abstract: Microplastics (MPs), pervasive environmental pollutants, pose escalating threats to human health, with children emerging as a critically vulnerable population. This systematic review, guided by PRISMA protocols, synthesizes evidence from 2015–2025 on MPs exposure risks from reusable plastic water bottles among school-aged children (4–15 years). Findings reveal significant MPs leaching into drinking water, influenced by bottle material such as PET and PP, usage duration, and cleaning practices. Children ingest an estimated …
Published in International Journal of Environmental Chemistry · Vol. 11, Issue 2, 2025 · pp. 20–35 Read article
-
Effect of Environmental Parameters on Corrosion of Metal Steel in Stagnant Fresh Water Using Finite Element Approach
Abstract: Corrosion as the determination or destruction of metal due to the reaction with it environment has posed a large amount of threat to industrial plants, human, increased cost of maintenance of plant and like cause injury to human due to accident in work place. This work studies the effect of environmental parameters of corrosion of three types of steel, Cast iron, mild steel and stainless steel in stagnant water media …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 6, Issue 1, 2020 · pp. 1–23 Read article
-
Application of a graphene oxide for determination of Cadmium, Lead, Copper and Zinc ions at trace level in personal Care Products using Solid Phase Extraction
Abstract: A novel and simple procedure Solid Phase µ-extraction was successfully used as a sample preparation method for the pre concentration and determination of Cd, Pb, Cu, and Zn in different personal care products samples. In the first screening, a five variables were selected with low (-) and high level (+) and were inspected by Plackett–Burman. In order to further optimization, a central 23 +star orthogonal composite design (CCD) was applied …
Published in International Journal of Analytical and Applied Chemistry · Vol. 6, Issue 1, 2020 · pp. 14–23 Read article
-
Quantum Dots in Oral Diagnostics and Theranostics:Promise and Preclinical Status
Abstract: Quantum dots in oral diagnostics and theranostics represent a rapidly evolving, largely preclinical strategy that couples highly sensitive optical imaging with targeted therapeutic delivery in the oral cavity. Their size-dependent emission, high photostability, and broad excitation spectra allow bright, multiplexed visualization of key molecular events in oral potentially malignant disorders and oral squamous cell carcinoma, while surface functionalization with antibodies, peptides, or small-molecule ligands enables selective binding to dysplastic and …
Published in International Journal of Applied Nanotechnology · Vol. 12, Issue 1, 2026 · pp. 20–30 Read article
-
Optimizing Gas Turbine Performance: Preventive Measures and Blade Durability Solutions
Abstract: The article explores the various failure mechanisms and preventive methods related to gas turbine blades, which operate under extreme mechanical and thermal conditions. The increasing demand for energy and efficiency in turbojet engines has led to larger and more complex turbomachines. As gas turbine blades are subjected to high operational temperatures, pressure, and stress, they are prone to multiple failure modes, including fatigue, creep, oxidation, corrosion, and erosion. To mitigate …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 10, Issue 2, 2024 · pp. 36–40 Read article