Search
405 articles for “mechanical properties”
-
Bamboo as an Innovative Construction Material in India
Abstract: This study explores the sustainability of bamboo as a construction material, focusing on its remarkable tensile strength and its potential for various structural applications. We discuss bamboo’s advantages in terms of ecological value, mechanical properties, and low energy consumption, as well as its drawbacks, including the need for preservation and fire safety measures. We also examine bamboo’s utility in green building designs and its potential to replace traditional construction materials. …
Published in International Journal of Sustainable Building Technology · Vol. 6, Issue 2, 2023 · pp. 15–21 Read article
-
Study of Microstructure and corrosion effects of precipitation hardened high strength AA-7xxx aluminium alloy subjected to cryo rolling
Abstract: The strength and life of an alloy is the primary parameter taken into consideration while building hulls and superstructures for marine applications. Usually AA-7xxx is widely used for these applications and hence is chosen for the present investigation. Cast AA-7xxx alloy reveals distribution of soluble intermetallic compounds in the α-aluminium matrix. In order to improve the mechanical properties and condition the microstructural features, precipitation hardening (solutionizing and ageing) treatment was …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 18–23 Read article
-
MWCNT AND GRAPHENE FOR IMPROVED CORROSION RESISTANCE OF MILD STEEL
Abstract: ABSTRACTThe protective coating method is a passive corrosion protection technique. The protective coating detaches the metallic surfaces from the aggressive media, such as moisture, salts, acids etc. Nanotechnology is a relatively modern development in scientific research, the development of this concept occurred over a very short period of time. One technique that has recently been used to increase the adhesive and anti-corrosive properties of polymer coatings is the addition of …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 12–17 Read article
-
Effect of Nanoclay on the Performance of Calotopis Gigantea Fiber Reinforced Thermoplastic Composites at Distinct Temperature
Abstract: Polymer-based nanocomposite is a developing subject that attracts many researchers due to its special qualities and versatility. Because the specific surface areas of nanofillers in nanocomposites are so high, it is much simpler to produce mechanical properties at the interface. Furthermore, a favorable interaction between the nanofillers and polymer matrix may manifest itself even at comparatively lower percentages of loading nanofillers. Thus, a smart, adaptive polymer nanocomposite material with the …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 2, 2023 · pp. 1–9 Read article
-
Study on the Properties and Applications of Thermoplastic
Abstract: Hot-applied thermoplastic is prepared for road deposition in a melting apparatus where the granular or block material is introduced and heated until it liquefies at temperatures exceeding 400F. When applied on asphaltic concrete, thermoplastic material develops a thermal bond via heat- fusion. A thermoplastic is a material, usually a plastic polymer, which becomes soft when heated and hard when cooled. Thermoplastic materials can be cooled and heated several times without …
Published in International Journal of Composite and Constituent Materials · Vol. 3, Issue 2, 2017 · pp. 16–21 Read article
-
An Insight into the Advanced Composite Materials Used in the Aviation Sector: A Review
Abstract: The creation of complex and specialised materials, such as composite materials, has advanced significantly in the field of aerospace engineering due to technological challenges. Composite materials are currently playing a bigger role in aviation engineering because of its greater strength at a reduced mass, firmness, and corrosion aversion. The study of composite substances used in aviation structures and further advanced composites as building materials are both covered in this paper. …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 · pp. 1–11 Read article
-
Compressive Behaviour of Lightweight Aggregate Concrete by Blending LECA
Abstract: Present work deals with the lightweight aggregate concrete (LWAC) by using Lightweight Expanded Clay Aggregate (LECA) as lightweight aggregate, LECA is used as replacement to the natural coarse aggregate in the concrete, in this experimental work percentage of lightweight aggregates are varied to study the change in the properties of concrete made by blending LECA. LECA content was varied from 20% to 100% at an increment of 20%. Total 6 …
Published in International Journal of Concrete Technology · Vol. 5, Issue 2, 2019 · pp. 10–15 Read article
-
Synthesis of Bromobutyl Rubber: Effect of Reaction Temperature and Time on Bromobutyl Rubber Microstructure
Abstract: Butyl rubber is prepared by cationic polymerization process either by solution or slurry phase by randomly copolymerizing isobutylene with small amount of isoprene (1-3 mol %). It has good air impermeability and oxidative stability and thus finds extensive use in inner tube applications. The presence of unsaturation in the form of isoprene units in butyl rubber provides a means of enhancing useful properties of this important commodity elastomer by incorporation …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 1, 2023 · pp. 30–39 Read article
-
Properties of Green Concrete Using Light Weight Aggregates
Abstract: With the growing distress over the needless exploitation of natural aggregates, synthetic lightweight aggregate produced from the environmental waste is a feasible new source of structural aggregate material. Unique with expanding worry over the inordinate misuse of characteristic totals, engineered light weight total delivered from natural waste is a feasible new wellspring of auxiliary total material. The engagements of auxiliary review lightweight cement minimise remarkably the self-heap of a structure …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 11–14 Read article
-
Nanofibers of Ultra-High Molecular Weight Polypropylene (UHMWPP) Composites: Processing, Properties and Applications
Abstract: The nanofibers of ultra-high molecular weight polypropylene (UHMWPP) composite made with polyethylene terephthalate (PET) by electrospinning process. The high-temperature setup developed by hardware modifications in electrospinning machine to perform such experiments. Bilayer composite mat of UHMWPP and PET nanofiber was fabricated by deposition of monolayer of UHMWPP over PET monolayer by electrospining process. The developed composite mat products were characterized by SEM, DSC and other physico-chemical methods. The composite mat …
Published in International Journal of Polymer Science and Engineering · Vol. 11, Issue 1, 2025 · pp. 35–48 Read article
-
Experimental Investigation on the Properties of Concrete Replacing Waste Plastic as Aggregates for Solving Waste Management Problem
Abstract: Solid waste management is one of the growing problems of every country. As part of this ongoing program to consider the growing waste management, pollution problem, and prevention framework in India, the Ministry of Environment has suggested various approaches and ways through which we can either recycle or use the most polluting materials like plastic. The present study covers one of the ways through which to recycle one of the …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 17–25 Read article
-
Revolutionizing Glass Science: Analyzing the Crystallization Dynamics of Economical Glass-Ceramic Compositions
Abstract: The development of glass-ceramics presents an innovative approach to material science, leveraging the unique properties of non-crystalline glass combined with controlled crystallization. This study investigates the crystallization dynamics of economical glass-ceramic compositions derived from raw materials, such as blast furnace slag and granite rock. We explore the fabrication processes, examining the influence of these raw materials on microstructural interlocking and phase composition. Our findings reveal that specific ratios of slag …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 10, Issue 2, 2025 · pp. 9–15 Read article
-
Utilizing Bakelite Waste as Partial Replacement for Coarse Aggregate in Concrete: A Sustainable Approach
Abstract: Abstract This research study investigates the innovative use of Bakelite waste as a partial substitute for coarse aggregate in concrete, focusing on its effects on various mechanical properties and overall performance of the concrete mix. With the growing concern over waste management and environmental sustainability, the incorporation of non-biodegradable materials, such as Bakelite, into construction practices offers a dual benefit: reducing the volume of waste destined for landfills while simultaneously …
Published in International Journal of Concrete Technology · Vol. 10, Issue 2, 2024 · pp. 23–28 Read article
-
Analysis of Tensile Strength Properties for FG260 Welded Cast Iron: A Review
Abstract: Gray cast iron is the most common cast iron and it can be effectively welded if cooling rates controlled during welding and after welding. Poor weldability of gray cast iron is due to the presence of much more carbon that is the found in flake or spherical form and silicon than other ferrous metal which results in cast iron is less ductile hence weld is subjected to more metallurgical complications …
Published in International Journal of Manufacturing and Materials Processing · Vol. 3, Issue 2, 2017 · pp. 23–28 Read article
-
Impact, Flexural, and Hardness Properties of AISI 1018 Mild Steel Butt Joint Welded using Gas Metal Arc Welding (GMAW) under Various Welding Parameters
Abstract: AbstractThe effects of welding parameters such as welding current, voltage, and travel speed on the impact, flexural, and hardness properties of AISI 1018 mild steel using Gas Metal Arc Welding (GMAW) were investigated. In this research, specimen sizes of 500 mm x 10 mm x 10 mm and 5.5 mm x 10 mm x 10 mm were fabricated according to ASTM standards. In addition, a v-groove had been prepared at …
Published in International Journal of Manufacturing and Materials Processing · Vol. 8, Issue 1, 2022 · pp. 6–13 Read article
-
Study on Properties of Concrete Cured With Poly Ethylene Glycol-600
Abstract: After water, concrete is the most using material globally. Without concrete, the world is unimaginable. The foundation of civilization is concrete. Coarse aggregate, cement ,fine aggregate and water are the main ingredients in concrete, which requires curing to attain its strength. Concrete must therefore cure for 28 days in order to complete the necessary hydration, desired strength. For the traditional curing processes, a lot of water is needed. This becomes …
Published in International Journal of Concrete Technology · Vol. 8, Issue 2, 2022 · pp. 14–21 Read article
-
Development of Flame-Retardant Polymers for Safer Construction Materials
Abstract: This research explores the development of smart textiles using bio-based materials that exhibit both temperature-adaptive and self-cleaning properties. With growing demand for sustainable alternatives in the textile industry, this study focuses on incorporating natural fibers and biodegradable coatings to achieve responsive fabric behavior. Key fabrication techniques, material choices, and performance characteristics are discussed, along with potential applications in medical, sports, and environmental textiles. This paper aims to bridge the gap …
Published in International Journal of Metallurgy and Alloys · Vol. 12, Issue 1, 2026 · pp. 35–43 Read article
-
Fabrication and Characterization of Paper-Sludge Reinforced Polypropylene Composites
Abstract: The purpose of this research was to identify some physical and mechanical characteristics of polypropylene (PP) composites reinforced using various paper sludge (PS) and PP combinations, as well as to assess the performance of the coupling agent. The physico-chemical characteristics of the waste sludge material from paper manufacturing wastewater treatment sludge (PS) were investigated. The physical and mechanical properties of the composite were examined in the experiment using three levels …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 2, 2022 · pp. 15–26 Read article
-
Experimental Investigation of FSW on Al 6061-T6 MG Dissimilar Joints
Abstract: Friction Stir Welding (FSW) is a solid-state joining technique that has shown significant potential for welding dissimilar materials, such as aluminum and magnesium alloys, which are difficult to join using conventional fusion welding methods due to large differences in their physical, thermal, and metallurgical properties. During FSW, contact between the rotating, wear-resistant tool shoulder, the pin, and the work piece produces frictional energy. Additional thermal energy develops because of intense …
Published in International Journal of Manufacturing and Materials Processing · Vol. 12, Issue 2, 2026 · pp. 1–12 Read article
-
Experimental Investigation of the Influence of Coarse Aggregate Size and their Proportioning on the M30 Concrete for CC Pavement
Abstract: Abstract The nominal maximum size (NMS) and proportion of coarse aggregates significantly influence the mechanical properties and performance of cement concrete pavements. While extensive research has focused on concrete mix design, the combined effect of coarse aggregate size and aggregate proportioning on the compressive strength of pavement-grade concrete remains inadequately understood. This study experimentally investigates the influence of coarse aggregate characteristics on the compressive strength of M30 grade concrete. Two …
Published in International Journal of Concrete Technology · Vol. 12, Issue 2, 2026 · pp. 13–23 Read article