Search
2000 articles for “design” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Aggrandize of Microstrip Antenna Parameters with Metamaterial and Varactor Diode for Application of Reconfigurable Antenna
Abstract: Abstract –In this paper , a new matametrial structure (MTM) implemented in microstrip transmission line configuration is proposed and its parameters like return loss, gain and bandwidth are analyzed. Hence a metamaterial structure of “wired and Interconnected Rings” is designed such that it exhibits negative permittivity and negative permeability at the same frequency as that of inset fed rectangular microstrip patch antenna. Here NRW parameters are used to verify negative …
Published in International Journal of Microwave Engineering and Technology · Vol. 3, Issue 2, 2017 · pp. 41–49 Read article
-
An Efficient Ultra-Wideband Bow-Tie Antenna
Abstract: In this paper, we design and analysis the result of the bow tie antenna with ground slotting. The entire dimensions of the bow tie antenna are 25mm × 32mm. The proposed antenna is suitable for WLAN 3/4.5/5 GHz bands. Antenna is simulated using high frequency structure simulator (HFSS) V.13 which is based on finite element modeling (FEM). The antenna characteristics such as return loss, radiation pattern and VSWR of the …
Published in International Journal of Microwave Engineering and Technology · Vol. 4, Issue 1, 2018 · pp. 6–10 Read article
-
A Wideband 3dB Hybrid Coupler for Operations in the C-band
Abstract: This study proposes and describes a novel wideband 3 dB directional coupler operating in the C-band (4–8 GHz). The proposed design was developed using microstrip technology with alumina being used as the dielectric, with a bandwidth of approximately 7 GHz (2–9 GHz), making it in theory, suitable for applications in the X-band (8–12 GHz) and L-band (1–2 GHz) as well. The increase in operational bandwidth was obtained by utilizing two …
Published in International Journal of Microwave Engineering and Technology · Vol. 4, Issue 2, 2018 · pp. 15–18 Read article
-
Dual Substrate Shorted Microstrip Patch Antenna for Bandwidth Enhancement and RF Energy Harvesting Application
Abstract: ABSTRACT In this study, a dual substrate shorted microstrip patch antenna is designed for RF Energy Harvesting Application. The proposed antenna covers signals between 2200-2300 MHz frequencies, area of the proposed antenna is compact. The proposed dual substrate patch antenna is loaded on FR-4 lossy substrate with thickness of 1.6 mm. The defected ground structure with square slots and increasing the height of the substrate are used for increasing the …
Published in International Journal of Microwave Engineering and Technology · Vol. 4, Issue 2, 2018 · pp. 1–5 Read article
-
Study of Different FSO System Transmitter and its Power Factors
Abstract: ABSTRACT Free space optics (FSO) is a communique technology uses that light propagating in free space to transmit data between points. The generation is beneficial where the bodily connections with the aid of the approach of fiber optic cables are impractical because of high charges or different issues starting with a formal definition and overview of the era, it goes on to explain the considerations for the transmitter and receiver. …
Published in International Journal of Microwave Engineering and Technology · Vol. 5, Issue 1, 2019 · pp. 14–18 Read article
-
Combination of Triangular and Semi Circular Microstrip Patch Wideband Antenna for Wireless Application
Abstract: ABSTRACTThe combination of triangular and semi-circular wideband dipole antenna with single feed line is proposed for wireless application. The proposed antenna consists of Arrow shaped patch antenna operating at the wideband frequency of 1.6305GHz-3GHz. In this antenna material used for designing is FR-epoxy, height of the substrate is h=1.6mm. Dielectric substrate and relative permittivity are =4.3, tanδ=0.02. Keywords: Dipole antenna, Microstrip patch antenna, Wideband antenna.Cite this Article: Sandeep Barua, Combination …
Published in International Journal of Microwave Engineering and Technology · Vol. 5, Issue 2, 2019 · pp. 8–12 Read article
-
Dual Band Integrated Elliptical Slot Microstrip Patch Antenna for RF Energy Harvesting
Abstract: ABSTRACTIn this paper, a dual band microstrip patch antenna is designed for Radio Frequency Energy Harvesting (RFEH) applications. The proposed antenna covers signals from 2300 MHz to 2400 MHz and 2450 MHz to 2550 MHz. The proposed dual band patch antenna is loaded on FR-4 lossy substrate with thickness of 1.6 mm. The elliptical circle and stubs are integrated on the radiating patch which is used for increasing the resonating …
Published in International Journal of Microwave Engineering and Technology · Vol. 5, Issue 2, 2019 · pp. 13–20 Read article
-
Review of Automotive Transmissions for Adapting Digital Display Technology
Abstract: ABSTRACTDigitizing the systems and processes to get in line with the era of Industry 4.0 has become a paramount situation demanding efforts in the direction. This epoch of changing technology has caused many industries to suffer backlog. The other industries with survival instinct bank upon different tools like IoT, digitization, digitalization, artificial intelligence, etc., to name few to pave their way on the roadmap of Industry 4.0. The automotive industry …
Published in International Journal of Microwave Engineering and Technology · Vol. 6, Issue 2, 2020 · pp. 7–17 Read article
-
Miniature Metamaterial Antenna for Microwave Imaging Application
Abstract: The work represented in the paper proposes a miniature Metamaterial (MTM) antenna using Split Ring Resonator (SRR) for Microwave Imaging applications. This SRR is fed using a single microstrip line. For structure optimization, parametric study is exploited, which helps in obtaining impedance bandwidth over the UWB frequency range (3.1 to 9.9 GHz). Entire structure is built on a FR-4 (εr = 4.3) Glass Epoxy substrate of dimensions of 13*12*1.6 mm. …
Published in International Journal of Microwave Engineering and Technology · Vol. 6, Issue 2, 2020 · pp. 18–25 Read article
-
Stretchable Antennas for Next Generation Communication Systems
Abstract: Due of its extensive applications in fields such as biomedical applications and wearable devices, the internet of things, and 5G applications, demand for flexible wireless communication systems is expanding. Flexible wireless communication necessitates stretchable antennas. Flexible electronic devices has many advantages like easy portability, light in weight and use of ecofriendly materials. The popularity of flexible electronic devices is due to these properties. The selection of flexible or stretchable antenna …
Published in International Journal of Microwave Engineering and Technology · Vol. 8, Issue 1, 2022 · pp. 41–46 Read article
-
Fabrication of Compact Flexible Antennas Using Exotic Nano, Metamaterials for Wearable and Bio Medical Applications
Abstract: Flexible antennas become a growing number of things as part of the rising demand for accessible, wireless IoT-based medical equipment. This paper majorly focuses on the various methods of fabrication of these flexible antennas. Here, several kinds of design innovations, novel materials, and innovative methods of manufacturing are laid out. Hence this review paper justifies the need for flexible antennas, processes used for fabricating them and their significance.
Published in International Journal of Microwave Engineering and Technology · Vol. 8, Issue 2, 2022 · pp. 1–7 Read article
-
Genetic Algorithm approach for the Position Control of Permanent Magnetic Synchronous Machine
Abstract: Permanent Magnetic Synchronous Motors (PMSM or Brushless DC Motor) are widely being used for many industrial applications because of their high efficiency, high torque and low volume. Research has conducted using genetic algorithm to develop a complete model of the BLDC motor and to design an optimal controller for its position control. Generally PID controller is being used for control purposes in many systems because of its simple structure and …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 2, Issue 1, 2016 · pp. 30–39 Read article
-
FUZZY LOGIC CONTROLLER FOR HARMONIC REDUCTION IN GRID CONNECTED SOLAR PV SYSTEM
Abstract: Solar PV systems are increasingly present in the electrical distribution systems due to the government’s incentives and low production cost of a developed PV technology. Power electronic converters play a major role in the integration of PV system with utility grid for high power generation. Extensive use of these devices leads to power quality problems such as sag, swell, harmonics, reactive power generation. Among these power quality issues harmonics are …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 2, Issue 2, 2016 · pp. 24–36 Read article
-
Classification of Electrical Conduits and Fittings in a Construction Project
Abstract: Building wiring is the electrical wiring and related devices such as meters, switches and light fittings used in buildings or other structures. Electrical wiring uses insulated conductors. Wires and cables are rated by the circuit voltage, temperature and environmental conditions (moisture, sunlight, oil, chemicals) in which they can be used, and their maximum current. Wiring safety codes vary by country and the International Electro-technical Commission (IEC) is attempting to standardize …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 3, Issue 2, 2017 · pp. 1–6 Read article
-
Three-Level Interleaved Boost Converter with Irradiance Adaptive Controller for Solar Power Utilization
Abstract: Solar energy conversion through photovoltaic is a rapidly growing source of green power supply. Therefore, improving the efficiency of PV system is considered as an important factor in supporting this trend. However, this concerns not only the improvement of PV cells, but also the efficiency of the power electronics circuits and the controls associated with them. Also, the PV modules are operated at low voltage levels, therefore, large voltage boosting …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 4, Issue 2, 2018 · pp. 1–8 Read article
-
Competitive Analysis for the Improvement of Power Factor using Zeta Converter and SEPIC Converter for BLDC Motor
Abstract: In this paper, we studied the competitive analysis for the improvement of power factor using zeta converter and SEPIC converter for BLDC motor by reducing the configuration of sensor. For the low power factor application, here we can control the speed of motor by varying the voltage of inverter by giving the feedback of BLDC motor drive. A low frequency is used for electromagnetic communication of the motor which reduce …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 5, Issue 1, 2019 · pp. 28–35 Read article
-
Wireless Control of DC Motor using Bluetooth
Abstract: This paper covers the basics and design of a model of wirelessly controlled DC motor usingBluetooth. This DC motor wireless controlling system uses the Bluetooth technology forcommunication between the mobile device and the model. The main objective of this model is tooperate a DC motor wirelessly by using a Bluetooth module for wireless communication. Thetechnology will replace the need to connect other devices to control the speed and direction ofDC …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 6, Issue 1, 2020 · pp. 35–41 Read article
-
Superconducting Magnetic Energy Storage Based Dynamic Voltage Restorer for Grid-Connected Hybrid PV-Wind Power System Modeling and Simulation
Abstract: The DVR-connected series will use three injections in a single application or three injections in three following converters to inject three compensating compressors in the main supply. The injection transformer raises the released VSI's output voltage to the required level. The converter also isolates the DVR circuit from either the transmission network. The voltage source inverter's (VSI) output power and the quality of the filter used to connect the injection …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 8, Issue 2, 2022 · pp. 35–42 Read article
-
Smart Train Accident Detection and Prevention System Using IoT
Abstract: In our proposal, a dual-purpose derailment and train carriage detachment detecting system is introduced. In the modern era, it is crucial to design a suitable system with the aid of technology that can assist us in managing significant issues like rail accidents. To extract and method the information from the sensors in our project, we use Node-MCU. Regarding the situation in India, a sizeable portion of the population uses trains …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 9, Issue 1, 2023 · pp. 29–46 Read article
-
Performance Investigation of Grating-based Photovoltaic Concentrator
Abstract: This paper elaborates the performance investigation of Grating based Photovoltaic Concentrator.Grating principle is used in the proposed concentrator photovoltaics (CPV). In this method a sidemountedconcentrator solar module structure is designed in which grating prism is used forconcentrating sunlight on solar cell. Diffraction grating is an optical device composed of a large number of closely spaced parallel slits or rulings. These rulings act as a series of narrow, closely spaced apertures …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 9, Issue 1, 2023 · pp. 22–28 Read article