Search
1891 articles for “ABS”
-
Nanostructures: Advancing Targeted Metabolic Engineering for Treating Metabolic Disorders.
Abstract: Nanostructures have emerged as powerful tools in the field of targeted metabolic engineering,offering precise control over metabolic pathways in specific cells or tissues. This technologyholds great promise for treating a wide range of metabolic disorders by modulating cellularmetabolism at the nanoscale.One of the key advantages of nanostructures in metabolic engineering is their ability to targetspecific cells or tissues with high precision. By encapsulating or delivering metabolicmodulators such as enzymes, cofactors, …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 2, 2023 · pp. 16–21 Read article
-
Thermal Material Used in Aerospace for Protection
Abstract: Ablative nanocomposites were set up by fusing multiwall carbon nanotubes (MWCNT) into phenolic gum and after that impregnating them into rayon-based carbon texture. MWCNT were mixed into phenolic gum at 0.5, 1, and 2 wt% loadings utilizing a mix of sonication and high shear blending to guarantee uniform scattering of MWCNT. The composite test examples were tried by utilizing an oxyacetylene test bed (OTB) applying a warmth flux of 1000 …
Published in International Journal of Composite and Constituent Materials · Vol. 2, Issue 2, 2016 · pp. 1–2 Read article
-
Synthesis & Characterization of ZnSe/CdSe/ZnS Nano-particles embedded in Polymer matrix- A Review
Abstract: The main purpose of this review is to highlight the present state of knowledge in synthesis, characterization, optical properties, challenges, and potential applications for the most common ZnSe/CdSe/ZnS: PVA polymer nanocomposites, utilizing these nanoscale materials for the application in optical field are being used numerously. The major impact is done on the research already done and being done from nanomaterial to nanocomposites since there has been a revived interest in …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 1, 2018 · pp. 28–33 Read article
-
A review on E-waste: National & International Scenario
Abstract: Electrical and electronic waste (e-waste) is one of the fastest growing municipal solid waste stream in the world. The existing management practices related to E-waste in most of countries are reasonably poor and have the potential to risk both human health and the environment. According to recent studies, only about 6 percent of the E-waste is recycled, of which 95 percent is recycled through the informal sector. E-waste recycling in …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 2, 2018 · pp. 21–31 Read article
-
Study on Preparation and Properties of Agro-waste Particleboard at Various Press Temperatures
Abstract: This study concerns the influence of temperature on changes in physical and mechanical properties of particleboard fabricated from betel nut (Areca catechu L) fiber (Agro-waste) and urea-formaldehyde adhesive during hot-pressing with multiple press temperatures (120, 130, 140, 150 and 160°C) at 15 minutes. The physical and mechanical properties of particleboards were determined by British Standard (BS-1811) and Indian Standard (IS-3087) Methods. For some physical and mechanical properties, it appears that …
Published in International Journal of Composite and Constituent Materials · Vol. 7, Issue 1, 2021 · pp. 40–47 Read article
-
An Introduction of Nanotechnology: Classification, Uses, and Applications of Nanomaterials
Abstract: Nanomaterials (NMs) have acquired noticeable quality in creative advancements due to their tuneable physical, synthetic, and organic qualities with improved performance over their mass counterparts. The order of the NMs is determined by their size, creation, form, and starting. The ability to predict the unique features of NMs increases the value of each order. Because of the increased growth of NM creation and their current uses, difficulties relating to harmfulness …
Published in International Journal of Composite and Constituent Materials · Vol. 7, Issue 2, 2021 · pp. 31–38 Read article
-
Advanced Techniques for Delamination Toughening in Carbon Fibre Reinforced Composites
Abstract: Carbon fibre reinforced composites are widely used in various industries due to their excellent strengthto-weight ratio and stiffness properties. However, one of the major issues in these composites is delamination, which occurs due to the weak interlaminar bonding between the layers of fibers and matrix. Delamination leads to a reduction in the load-carrying capacity and structural integrity of the composite. To address this issue, several advanced techniques for delamination toughening …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 2, 2022 · pp. 49–55 Read article
-
Review on Natural Fiber Composites: Banana/Hemp Fiber and Its Hybrid Composites
Abstract: The centuries ago usage of composites materials plays important role in industrial revolution. In ancient days Egyptians used straw as reinforcement in clay bricks to build house. With the invented of glass fiber and resins, glass fiber reinforced composites found its application in many areas. Abundance nature and moderate specific strength than most of the organic fibers, low density and biodegradable nature make the natural fiber as attractive reinforcement in …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 2, 2015 · pp. 14–27 Read article
-
Sugar Manufacturing and Process Performance Analysis- A study
Abstract: ABSTRACT Sugar is one of the most desirous commodity in every part of the world. It production requires a lot of planning from crop to final product development. In the present work it is analysed that sugar production is passed through a lot energy intensive processes. These energy intensive processes are necessary at every level of sugar production. Therefore, to plan any energy conservation policy it is rudiment to understand …
Published in International Journal of Composite Materials and Matrices · Vol. 2, Issue 2, 2016 · pp. 1–7 Read article
-
Thermal Analysis of I.C. Engine Poppet Valve Using FEM: A Review
Abstract: Abstract: Inlet and outlet valves in I.C. Engines are referred to as poppet valves. These valves are operated by the valve mechanism. When these valves are uncovered to the heat thermal stresses are evolved in order that thermal evaluation is very important to predicting and stopping failures in valves. The foremost position of the valve train is to ensure the gases change manner for all the engine speeds. The valve …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 1, 2018 · pp. 30–37 Read article
-
Sliding wear behavior of plasma sprayed NiCrAlY-WC based composite coatings on AA5083 alloy
Abstract: WC based coatings was deposited by thermal spray process have been extensively used in industrial application to counter abrasive type of wear. In this study, for the first time NiCrAlY-WC based composite coatings were deposited on AA5083 substrate by plasma sprayed coating technique. The composite coatings were characterized by optical microscopy (OM), scanning electron microscopy (SEM) and microhardness. Sliding wear behavior of coated and uncoated samples was carried out on …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 21–26 Read article
-
Strain Based Approach to the Fatigue Evolution Modeling of Concrete under Tension-Tension Loading
Abstract: Abstract: Strain based Approach to the Fatigue Evolution Modeling of Concrete under Uniaxial Tension-Tension Loading plays a very important role in the evaluation of the material properties of concrete utilizing strain analysis methods, the nonlinear fatigue strain evolution model is proposed, and the hypothesis of recycle ratio related fatigue strain amplitude causes stiffness degradation and inelastic deformation is briefly described which are the essential material properties of concrete. This paper …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 1, 2019 · pp. 36–56 Read article
-
Synthesis , Characterization and Biological Activity of Schiff base Derived from Sulphanilamide and Salicylaldehyde and Its Metal Complexes
Abstract: ABSTRACT : Schiff bases are important intermediates for the synthesis of various bioactive compounds. However, various studies have shown that Schiff bases derived from biologically active ingredients present in medicinal plants are more effective in biological and medicinal activity than in its pure form. In this paper K(I), Ni (II), Mg (II), Cd (II) and Pb(II) Complexes were synthesized from Schiff bases derived from sulphanilamide and Salicylaldehyde. The ligand and …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 1, 2019 · pp. 21–29 Read article
-
Synthesis and Antimicrobial Activity of Schiff base metal complexes derived from Ampicillin with Vanillin
Abstract: ABSTRACT: Metal -drug complexes compounds are more popular nowadays due to their greater biological activity than uncompleted legends of some drugs. However various studies have shown that Schiff base derived from biologically active ingredients present in natural materials in its pure form. In this paper K(I), Pb(II), Sr(II), Co(III), and Ba(II) complexes were synthesized from Schiff base derived from ampicillin and vanillin. The ligand and metal complexes have been screened …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 1, 2019 · pp. 15–20 Read article
-
Finite Element Analysis of Composite Tube
Abstract: Abstract – In many industries, composite tubes are preferable than other materials, like, aluminum, steel, wood, iron. The durability, strength, stiffness, weather and corrosion resistance of the tubes are required properties in industries. It is fabricated in several layers depending on their functions. In this study, composite tube is modeled using ANSYS software by changing material properties and layer orientation. ANSYS can predict results before fabricating composite sample. The meshed …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 48–59 Read article
-
Thermo-Mechanical Properties of Banana and Jute Fiber Reinforced Polypropylene Composites
Abstract: Abstract Present research aims at finding out better fiber reinforcement for low cost and eco-friendly polymer matrix composite. Polypropylene was chosen as a matrix, while jute and banana fiber were chosen as reinforcement. Composites were prepared by using a hot press machine. Fiber loading was varied at 0, 4 and 8 volume%. Both raw jute and banana fiber was chemically treated with 5 wt% sodium carbonate and composites were also …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 37–47 Read article
-
Fabrication and characterization of Aluminum-Granite-Graphite Metal Matrix Composite
Abstract: Moving machine elements are constantly subjected to wear and tear. Machine life can be improved by using hard and wear resistant materials. Most of machine elements are made of metals or alloys. These materials alone cannot meet the requirements of design of long-life machines. Naturally occurring hard materials lack the strength to withstand the machine loads. Composite materials provide the solution to such requirements. Based on requirement, a composite material …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 20–30 Read article
-
Implications of ceramic – metal matrix compose
Abstract: AbstractThis article summarizes some formatives over WC-metal matrix composite surfacing on hard as well soft alloys. Composite surface has coated by laser, plasma and electroplating. WC-Ni composite has prepared by plasma transferred arc welding on steel surface. Thickness achieved from several mm on small parts to thin deposits on large surfaces. Cu-substrate accorded WC-Ni laser cladded deposition. Laser deposition of WC-Ni-NiCr on stainless has increased wear and erosion under flowing …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 31–37 Read article
-
Study of Attenuation Coefficient of Cu, Ag & Au
Abstract: The Absorption coefficient or Ultrasonic attenuation of Cu, Ag & Au at the range of 1 GHz using the calculated values of mason non-linearity parameter, ultrasonic Gruneisen parameter, thermal relaxation time and Debye average velocity along with ultrasonic wave velocity and elastic constant have been studied. This is useful to understanding the mechanism of interaction between acoustic wave and crystal lattice. The work is also beneficial to resolve various problem …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 1–7 Read article
-
Plastics Compressive Strength Testing
Abstract: Compression test is a mechanical test that determines how much compressive force a material to resist before cracking. A gradually applied load compresses the test item, which is commonly in the shape of a square, pyramid, or cylinder, between the platens of a compression-testing machine. Many ductile metals, such as mild steel, have extremely high compression strength, yet measuring them is challenging. Whenever a load is given to a ductile …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 2, 2021 · pp. 46–50 Read article