Search
1871 articles for “Paper”
-
Study the Structural behavior of Copper Nanoparticle using Polyol Method
Abstract: An easy methodology for the preparation of well-dispersed copper nanoparticles by polyol method, victimization 1-hexadecylamine as a protectant within the encompassing medium, has been developed. The size and form of the Nanoparticles are controlled by the polyol method and one in all the wide used ways to induce needed shape of Nanoparticles. Generally, PVP is uses as stabilizer for forming smaller size nanoparticles however extremely non-uniform, during this paper proposing …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 1, 2022 · pp. 27–32 Read article
-
Deployment of SEED Sensors Using Biocomposite Substrate Based on RFID Technology
Abstract: As normal assets keep on turning out to be progressively scant internationally, cultivating innovation for agrarian creation to take care of the world has been headed to turn out to be more exact and productive. As of late a sensor has been created to address these necessities by straightforwardly checking the dirt climate remotely to assist with further developing harvest wellbeing and yields. The Sensing Earth Environment Directly (SEED) sensor …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 1, 2022 · pp. 33–40 Read article
-
Bio-based Composites for Sustainable Construction
Abstract: Bio-based composites are gaining significant attention as sustainable construction materials due to their eco-friendly nature and potential to reduce the environmental impact of traditional construction materials. This paper provides an overview of bio-based composites and their applications in sustainable construction. The use of bio-based materials, such as natural fibres, bio-based resins, and bio-based fillers, in composites offers several advantages, including reduced carbon footprint, renewable sourcing, and improved energy efficiency.The properties …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 2, 2023 · pp. 75–80 Read article
-
Microstructure Dependence of Electrical Properties in AgI- and Ag2S-Doped Glass Nanocomposites
Abstract: In this paper, we report the study of microstructure dependence of ion conduction for several AgI- and Ag2S-doped glasses and glass nanocomposites systems. The structure and electrical properties of these samples have been studied and the effects of formation of nanocrystalline phases on the electrical properties of these glasses are presented. The microstructure of these glasses was studied employing transmission electron microscope (TEM). The temperature dependence of dc conductivity shows …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 2, 2015 · pp. 9–13 Read article
-
Experimental Investigation on Tensile Properties of Al6061-Graphite Particulate Composites
Abstract: This paper presents the experimental work carried out on the tensile behavior of aluminium 6061 (Al 6061) graphite particulate composites. The required specimen are prepared using stir casting method with graphite proportions ranging from 3 to 12 % by weight. The mechanical behavior of Al 6061 graphite particulate composites produced using stir casting method, was investigated by conducting experiments on Universal Testing Machine (UTM). Tensile specimens were utilized for tensile …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 2, 2015 · pp. 1–8 Read article
-
Sensing Capabilities of Fiber Reinforced Polymer (FRP) Composite Integrated With Electrical Inserts
Abstract: This paper describes the attempts made in developing a passive smart material by the integration of electrical inserts in the FRP components and studying the electrical & mechanical behavior under different loading conditions. FRPs are fabricated with copper inserts and are tested to study the resistive and capacitive behaviors of prepared specimens. FRP components are also tested for tensile, bending, compression and impact strengths to determine the effect of metal …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 2, 2015 · pp. 28–33 Read article
-
Free Vibration Analysis of Laminated Composite Plate with Various Boundary Condition Using FEM
Abstract: The vibration analysis of laminated composite plates is analyzed using finite element method. A suitable finite element model is proposed and developed based on first order shear deformation theory using ANSYS parametric design language (APDL) code. The model has been developed using an appropriate eight node isoparametric element (SHELL281) from the ANSYS element library. In this paper Numerical results have been computed for the effect of material properties, thickness ratio …
Published in International Journal of Composite Materials and Matrices · Vol. 2, Issue 1, 2016 · pp. 1–7 Read article
-
An Evaluation of Cracks Repairing Techniques in Metals
Abstract: Cracks are surface that develop in a material. Dissemination energy derived from mechanical, thermal, chemical, and metallurgical effects, or a grouping of these may affect crack beginning and growth. Numerous types of cracks exist in metals and can be characterized as grinding, solidification, cooling, crater, machining tears, plating, centerline, pickling, heat treatment, fatigue, creep, stress corrosion and hydrogen cracks. Cracks can grow and lead to complete fracture of the component …
Published in International Journal of Composite Materials and Matrices · Vol. 3, Issue 1, 2017 · pp. 9–15 Read article
-
Behavior and Comparison of Mixture of High Strength Concrete (M45) and Super Plasticizers (SP 430)
Abstract: The aim of this paper is to study the High Strentgh Concrete of mix design M45 with P.P.C, O.P.C and compare the Mechanical Properties. Admixures have been used for generating High Strength Concrete and optimum dosage. Comparative studies of High Strentgh Concrete using P.P.C, O.P.C and by using 0.5%, and 1% of Super Plasticizer (S.P 430) with O.P.C. KEYWORDS: High Strength Concrete, Mechanical Properties, Super Plasticizer-430, PPC,OPC.
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 1, 2018 · pp. 11–17 Read article
-
Mechanical Behavior and Model Fitness of the Natural Fiber Composite: A Study on Orange Peel and Charcoal Composite
Abstract: In this paper, orange peel with charcoal in addition with epoxy resin composite is tested for the behavior of mechanical properties. The results depicted that the best hardness, thickness, tractable flexural are getting for the material organized with the 20 % of weight sustained orange strip epoxy composite. The obtained results were also tested for regression analysis for validate the experimental data for assessment of model fitness. Keywords: natural composite …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 33–42 Read article
-
Strain Based Approach to the Fatigue Evolution Modeling of Concrete under Tension-Tension Loading
Abstract: Abstract: Strain based Approach to the Fatigue Evolution Modeling of Concrete under Uniaxial Tension-Tension Loading plays a very important role in the evaluation of the material properties of concrete utilizing strain analysis methods, the nonlinear fatigue strain evolution model is proposed, and the hypothesis of recycle ratio related fatigue strain amplitude causes stiffness degradation and inelastic deformation is briefly described which are the essential material properties of concrete. This paper …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 1, 2019 · pp. 36–56 Read article
-
Synthesis , Characterization and Biological Activity of Schiff base Derived from Sulphanilamide and Salicylaldehyde and Its Metal Complexes
Abstract: ABSTRACT : Schiff bases are important intermediates for the synthesis of various bioactive compounds. However, various studies have shown that Schiff bases derived from biologically active ingredients present in medicinal plants are more effective in biological and medicinal activity than in its pure form. In this paper K(I), Ni (II), Mg (II), Cd (II) and Pb(II) Complexes were synthesized from Schiff bases derived from sulphanilamide and Salicylaldehyde. The ligand and …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 1, 2019 · pp. 21–29 Read article
-
Synthesis and Antimicrobial Activity of Schiff base metal complexes derived from Ampicillin with Vanillin
Abstract: ABSTRACT: Metal -drug complexes compounds are more popular nowadays due to their greater biological activity than uncompleted legends of some drugs. However various studies have shown that Schiff base derived from biologically active ingredients present in natural materials in its pure form. In this paper K(I), Pb(II), Sr(II), Co(III), and Ba(II) complexes were synthesized from Schiff base derived from ampicillin and vanillin. The ligand and metal complexes have been screened …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 1, 2019 · pp. 15–20 Read article
-
The uniform fully dense ceramics processing
Abstract: Primary task in the process of advanced ceramics production is ceramic mixture with the uniform distribution of the densities of the components of this mixture. One of the stages of the process of advanced ceramics production the mixing is main instrument for the solution of this task. The existing methods of mixing do not permit in the sufficient form to produce uniform fully dense ceramics. This paper represents the application …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 1, 2019 · pp. 30–35 Read article
-
Experimental Optimization of Process Parameters for Tape Wound Composite Cylindrical Shells by using Taguchi Method
Abstract: The purpose of this paper is to design and construct laminated composite cylindrical shells. Tape wound layup method is implemented for the preparation of composite laminated shells by E-glass fiber mat and Epoxy resin as adhesive. The shells were made by considering two parameters p1-diameter of mandrel and parameter p2- stacking sequence. As per the L9 orthogonal array the required diameter and stacking sequence was arranged. The composite shells were …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 18–26 Read article
-
The advanced composite materials production by new method using the process of vibro-turbulization
Abstract: Typically, the methods of composite materials production, such as epoxy bases, include preparing a binder by mixing a hardener, a solvent and an epoxy resin, infusing a fibrous or powder filler with a binder, and hardening by heating under pressure. These methods do not permit to reach the main goal of the production of advanced composite materials with a basis (matrix) filled by uniformly dvistributed fibrous or powder filler (armoured …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 1, 2020 · pp. 1–4 Read article
-
Compatibilizing Effect of Modified Polypropylene on the Properties of Polypropylene/Organically Modified Layered Silicate Nanocomposites
Abstract: In the present research paper, a series of polypropylene (PP) nanocomposites containing 3, 5, and 7 wt% of an organically modified layered silicate (OM) were prepared via direct melt mixing in the presence of maleic anhydride grafted polypropylene (indicated as PP-g-MA, PPMA), and hexamethylenediamine-modified maleic anhydride grafted polypropylene (marked as PP-g-HMDA, PPHMDA) as compatibilizing agent at concentration of 10 wt%. Subsequently the influences of the compatibilizer on the morphological, mechanical, …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 8–19 Read article
-
A Model for Plastic-Hydrolytic Damage Bioresorbable Polymer Composites
Abstract: This paper explains and assesses a recently developed constitutive model for elastic-damage that may sustain plastic-hydrolytic damage. When a metallic material is subjected to plastic strain, voids and microcracks in the metal matrix start to form, develop, and merge. This is what causes ductilitydegradation in metals. Only a few of the many models that have been presented to depict ductile failure have done a thorough analysis of the entire damage …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 23–27 Read article
-
Environment Friendly, Exterior Grade Resin Adhesive from Phenol-Animal Glue Formaldehyde (PGF)
Abstract: Phenoplast and aminoplast based resins are the important adhesive for the manufacturing of marine grade, shuttering and moisture resistance plywood. Environmental concerns and higher cost of petroleum based resins have resulted in the development of technologies to replace phenol partially by biomaterials for the manufacturing of resin adhesive. Natural bio-based materials such as tannin, CNSL (cardanol), lignin soya etc. are used as partial substitution of phenol. This paper presents the …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 · pp. 16–22 Read article
-
Manufacturing of BWP-Grade Plywood from Resin Adhesive Using Animal Protein (Glue) by Partial Replacement of Phenol
Abstract: Abstract This paper presents the development of plyboard using phenol–glue–formaldehyde (PGF) resin and their basic mechanical properties. Phenoplast and aminoplast-based resins is the important adhesive for the manufacturing of boiling water proof (BWP) grade, shuttering and moisture resistance plywood. Environmental concerns and higher cost of petroleum-based resins have resulted in the development of technologies to replace phenol partially by biomaterials for the manufacturing of resin adhesive. Natural bio-based materials such …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 Read article