Search
688 articles for “strength”
-
A Study on Effect of Polarity on Mechanical Properties in Saw Process
Abstract: Welding is one of the most common fabrication techniques which is extensively used to obtain desirable quality welds for intended application in various structural components. The invariable importance of welding processes has been very well realized since long times ago, therefore till nowadays there is hardly any sector of human life which has not been benefited from applications of welding. Apart of quality of flux and welding parameters, welding processes …
Published in International Journal of Manufacturing and Materials Processing · Vol. 7, Issue 1, 2021 · pp. 1–6 Read article
-
A Comprehensive Review of the Development of Magnesium Composites and the Effect of Nanomaterials on Tribo-Mechanical Performance in Automotive Applications
Abstract: Abstract Magnesium and its alloys have emerged as promising lightweight materials for the automotive industry owing to their extremely low density, high specific strength, and potential to significantly improve fuel efficiency and reduce emissions. Despite these advantages, the widespread structural and functional application of magnesium alloys remains limited due to inherent challenges such as insufficient mechanical strength, poor wear resistance, low hardness, and high susceptibility to tribo-corrosion under severe service …
Published in International Journal of Manufacturing and Materials Processing · Vol. 12, Issue 1, 2026 · pp. 1–14 Read article
-
Microstructure and Mechanical Behavior of Microalloyed Forging Steels
Abstract: The microalloyed (MA) forging steels have been developed over the past several decades and they are gradually employed in the high-performance applications in many structural, automotive, and numerous engineering applications. The principle of microalloying contents in the Fe–C alloy system, thereby preferably combined with different mechanical, heat treatment, and microalloying solubility control the precipitation behaviors that lead to enormous opportunities to develop a new generation of high strength low alloy …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 2, 2025 · pp. 1–14 Read article
-
Carbon Fiber Material Analysis for Bicycle Frame using Finite Element Analysis
Abstract: Abstract This Research is based on Carbon fiber composite material for Bicycle frame analysis using Finite Element Analysis (FEA). Carbon fiber composite materials have become increasingly popular in the production of high-performance bike frames, primarily due to their superior strength, lightweight nature, and advanced mechanical properties. The primary objective of this research is to assess the structural reliability of bike frames using finite element analysis (FEA). This approach enables an …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 10, Issue 2, 2024 · pp. 16–24 Read article
-
Experimental Study on the Surface Properties of Coconut Husk Fiber and Banana Fiber Treated with Sodium Lauryl Sulfate
Abstract: The focus of modern research is on using natural, biodegradable, and renewable materials in place of synthetic ones. Composites made from natural fibers are undergoing extensive research because of their unusual characteristics and eco-friendliness. Natural fibers have the benefits of being readily available, simple to handle, and biodegradable. One of the best ways to improve the mechanical characteristics of polymer is to reinforce it with natural fibers. With hybrid composites, …
Published in International Journal of Composite and Constituent Materials · Vol. 10, Issue 2, 2024 · pp. 13–24 Read article
-
A Study on Partial Replacement of Fine Aggregates with Crumb Rubber and Cement with Metakaolin
Abstract: Concrete, often referred to as man-made rock, consists of cement, aggregates, and water. Recent experimental studies have explored the strength characteristics of concrete by partially replacing fine aggregate with crumb rubber and cement with metakaolin. Concrete cubes were tested for compressive strength at 7 and 28 days, using various percentages of crumb rubber and metakaolin as replacements for fine aggregate and cement, respectively. The aim of the study was to …
Published in International Journal of Composite Materials and Matrices · Vol. 10, Issue 1, 2024 · pp. 7–18 Read article
-
Investigations into the Features and Attributes of Low-Density Polyethylene/Thermoplastic Sago Starch Composites
Abstract: Low-density polyethylene, the material used to make most plastic shopping bags, has a considerable negative impact on the environment. It is enough intriguing for a substance to decay, develop for whatever reason (hydrolysis, Pseudomonas aeruginosa, etc.), and be exposed to the elements. Sodium trimetaphosphate was used in this experiment to treat sago starch. Using additives (glycerol/urea, 1% benzophenone, and epolene wax) in the same amount of starch, sago starch was …
Published in International Journal of Composite and Constituent Materials · Vol. 10, Issue 1, 2024 · pp. 10–23 Read article
-
Optimizing Concrete Composition: Evaluating the Effects of Flaky Aggregates, Steel Slag, and Marble Powder on Performance
Abstract: The characteristics of materials used in construction have a significant impact on the performance ofthe resulting concrete. Coarse and fine aggregates are crucial components in cement concrete,influencing its strength and workability. Research has shown that the type of aggregate used, whethercoarse or fine, plays a critical role in these properties. In this study, we examine the combined effect offlaky aggregates and steel slag as partial replacements for coarse aggregates on …
Published in International Journal of Structural Engineering and Analysis · Vol. 10, Issue 1, 2024 · pp. 38–46 Read article
-
Suitability of the Rice Husk Ash as a Pozzolanic Material for Cement Replacement in Concrete
Abstract: The optimized RHA (rice husk ash) by controlled burn or grinding has been used as a pozzolanic material in cement and concrete. It provides many benefits, like improved strength and sturdiness properties, and environmental edges associated with the disposal of waste materials and to reduced greenhouse gas emissions. Up to now, very little analysis has been done to analyze the utilization of RHA as supplementary material in cement and concrete …
Published in International Journal of Sustainable Building Technology · Vol. 2, Issue 1, 2019 · pp. 39–50 Read article
-
Mechanical properties of Poly vinyl alcohol and Nitrocellulose blends.
Abstract: Mechanical properties of polyvinyl alcohol and nitrocellulose blends has been determined successfully via tensile strength, Young’s modulus, percentage elongation and impact strength. The blends of the respective polymers are in the ratio PVA:NC (90:10,80:20,60:40,50:0,40:60,10:90). There are good results from different blend ratios which include tensile strength PVA: NC 90:10 (16.98MPa) Young’s modulus 60:40 (0.71MPa). The highest percentage elongation was observed for 80:20 at 160.09%. The most elastic blend ration was …
Published in International Journal of Analytical and Applied Chemistry · Vol. 6, Issue 1, 2020 · pp. 54–59 Read article
-
Mechanical characterization of Fiber glass Composites with Nano silica
Abstract: Epoxy-based fiber glass composites with enhanced strength by silica Nano particles checked for mechanical strength by addition of nanoparticles. Fiber glass Composites were prepared with glass fiber and nanoparticles containing resin, by infusion method. proper mixing of nanoparticles in resin was checked by various techniques. Viscosity of liquid resin reduced because of nanoparticles but still have good command to reinforce glass fibers. glass transition temperature (Tg) of polymer containing silica …
Published in International Journal of Chemical Separation Technology · Vol. 5, Issue 1, 2019 · pp. 49–58 Read article
-
Physico-Mechanical Performance of Waste Plant Fiber Reinforced Thermoplastic Composites for Automotive Applications
Abstract: To maximize the interfacial bond strength, it is necessary to investigate the direct relationship between the degree of fiber-matrix adhesion and the mechanical and fracture behavior of composites. In this work, the strength of the interfacial bond between polypropylene (PP) and waste plant fiber (Dharose plant fiber, DF) that have been subjected to ultraviolet radiation (UV) was established. By using hot press molding, unidirectional composites of PP with dharose plant …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 1, 2023 · pp. 14–24 Read article
-
Vacuum Dewatering During Concreting: Modern Construction Method
Abstract: In the RCC construction, water–cement ratio is detrimental for concrete. We always try to restrict the water–cement ratio because we want structure achieve its higher strength rather it is necessary for structure life. For the chemical reaction which is generated in cement and water, water–cement ratio of less than 0.38, whereas the adopted water–cement ratio is much more than that mainly because of the requirement of workability. After the requirement …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 6–12 Read article
-
Study of the Effect of Water Retarding Concrete Admixtures on the Properties of Concrete
Abstract: Water retarding concrete admixtures and super plasticizer are extensively utilized to recover the structural and mechanical properties of fresh and hardened concrete. These admixtures are more regularly used in pre-stressed concrete, slim components with overfilled and densely filled reinforcement, beams and slabs pre-cast basics and long slender column. In current decades, marvelous success has been attained in the progression of chemical admixtures for Portland cement. Most efforts have concentrated on …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 1, 2018 · pp. 10–14 Read article
-
To Study Mechanical Properties of Concrete by Using Industrial Waste Material
Abstract: Concrete is a very important material with cement, water, aggregate and admixture as contents. Due to increasing pollution and demand of concrete, its production should be environmental friendly. In this study, we emphasize on environment friendly concrete. The proportion of silica fume was as follows: add 3%–15% in interval of 3% by weight of cement in concrete and fly ash was add 5%–25% in interval of 5% by total weight …
Published in International Journal of Construction Engineering and Planning · Vol. 5, Issue 1, 2019 · pp. 18–27 Read article
-
Fresh and Hardened Properties of High Performance Concrete with Weld Slag as Fine Aggregate
Abstract: This research centers on the incorporation of welding slag, the residue remaining after the welding process, as fine aggregates in the production of high-performance concrete with a compressive strength of 70 MPa. The chemical and physical characteristics of welding slag aggregates (WSA), such as chemical compositions, specific gravity, SEM images, XRD, and EDS analysis, were investigated. Additional investigations were carried out by substituting welding slag with standard sand at varying …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 2, 2023 · pp. 29–36 Read article
-
INVESTIGATION OF STEEL FIBER REINFORCED CONCRETE CORBELS BY EXPERIMENTAL AND ANALYTICAL METHOD
Abstract: In the present paper, an experimental results and predicted values by truss analogy method, ACI Building Code (ACI 381-83) provisions for corbels, and method given by Fattuhi is investigated. The concrete used in the corbels is of M-60 grade. Test were carried out on 27 samples of size 150 x 150 x 200- mm were shear span was varied from 175 to 200 as shown in table (5) and concrete …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 23–29 Read article
-
Effect of Accelerated Curing and Normal Curing Regimes on UFGGBFS-Based Semi-Lightweight Concrete
Abstract: This paper deals with the performance of semi-lightweight concrete (sLWC), prepared by using calcite powder pellets as coarse aggregates which was improved by partial replacement of cement with UFGGBFS (ultrafine ground granulated blast-furnace slag). Cement could be replaced by UFGGBFS as 0%, 5%, 10%, 15%, 20%, 25%, 30%, 35%, 40%, 45%, 50%, 55%, 60%, 65%, and 70% to enhance the strength and durability properties of concrete. High-range water-reducing admixtures (HRWA) …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 1–7 Read article
-
Experimental Study of Mechanical Properties Geopolymer Concrete.
Abstract: This experimental study aimed to define the parameters for optimum mix design of geopolymer concrete made by partial replacement of cement. The geopolymer concrete is nothing but the formation of fly ash and alkali activators. Fly ash is the waste product from the thermal power station and may use as the pozzolanic material. But, only fly ash is may not the only replacement for the cement, for the more binding …
Published in International Journal of Concrete Technology · Vol. 5, Issue 2, 2019 · pp. 16–22 Read article
-
Experimental Study on Partially Replacement of Fine Aggregate & Coarse aggregate by Waste Marble with addition of S-Fiber
Abstract: Today’s world is a concrete jungle. With the ever increasing population of the world, in general and the developing countries there is the tremendous pressure on the Civil Engineer to develop a cost effective as well as ecofriendly structure to fulfill the need of the human being. Concrete is a heterogeneous mixture of binding material (cement or lime), coarse aggregates, fine aggregates (sand) and water. Fine and coarse aggregates are …
Published in International Journal of Concrete Technology · Vol. 5, Issue 2, 2019 · pp. 1–9 Read article