Search
9 articles for “Bracing System”
-
Seismic Assessment of Reinforced Concrete Structures Coupled with O-Grid Bracing Systems
Abstract: The greatest challenge for structural engineers is to design the structures to be earthquake resistant. Basically, the earthquake-resistant design of reinforced concrete structures is a force-based design. When a structure is designed for seismic resistance, various systems are embedded into the structure so as to resist the lateral forces. One of the systems, which are used for resisting lateral forces, is to provide the structures with different types of bracings. …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 5, Issue 1, 2019 · pp. 4–13 Read article
-
MODAL ANALYSIS OF CONVENTIONAL RCC STRUCTURE WITH STEEL BRACING
Abstract: It is a well-known fact that high rise reinforced structures are vulnerable to lateral loadings from things like earthquake and wind stresses. Bracing systems have the excellent benefit of adding just a tiny amount of bulk to the structure while significantly enhancing its performance. Building modelling is done both with and without a bracing system in this study. Analysis that is both linear and dynamic is being done. The structure …
Published in International Journal of Structural Engineering and Analysis · Vol. 9, Issue 1, 2023 · pp. 48–62 Read article
-
Analysis and Design of Transmission Tower
Abstract: Transmission Tower carry electrical transmission conductor from ground at safe height. The objective of paper is to find most economical section of tower and it configuration as per Indian Standard Code. In this paper the comparatively study is conducted with axial forces, deflection, sectional properties, loading between two types of bracing system X and K. The transmission tower height of 50m and base width 8.50m. Keywords: Bracing, wind load, Transmission …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 7, Issue 2, 2021 · pp. 33–39 Read article
-
Seismic Vulnerability Assessment and Enhancement of Steel Moment Resisting Frame with Hybrid Damping System
Abstract: Installation of energy dissipaters enhances the energy dissipation capacity of the structure. For an earthquake response, energy dissipation capacity and an innovative approach of design of these systems, this research work recommends use of Steel moment resisting frame (SMRF) enhanced with passive energy dissipaters. Non-linear time history analysis of a ten storied steel structure is carried out, with incremental dynamic loading of seven scaled earthquake ground motion time history records. …
Published in International Journal of Structural Engineering and Analysis · Vol. 7, Issue 1, 2021 · pp. 1–10 Read article
-
Behavior of Cantilever and Strut Sheet Pile Embedded in Soil using Finite Element Method
Abstract: This research work is mainly focused on analysis of geotechnical aspects/parametres of Sheet Pile embedded in any soil condition using Finite Element Analysis. For this research work the finite element geotechnical analysis package Optum G2 has been brought into use. The Soil and Sheet Pile both have been designed/modelled as per Mohr-Coulomb Criterion. Here strutted(braced) sheet pile system using a strut modelled as fixed end anchor C300 (with yield force …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 9, Issue 2, 2023 · pp. 18–28 Read article
-
Analysis of RC Structure with Shear Walls at Different Locations in Different Seismic Zones
Abstract: As the world moves towards development and transformation, the need for high rise buildings becomes prominent to overcome lack of horizontal land expansion. High rise buildings are often susceptible to lateral forces such as earthquakes and winds as compared to low rise buildings. This accounts for structural engineers to carry out various seismic analysis and implement lateral force resisting systems such as shear walls, braces and moment resisting frames in …
Published in International Journal of Architectural Heritage · Vol. 4, Issue 2, 2021 · pp. 1–11 Read article
-
Evaluation of RC Frames in Shifting on Seismic Zone 3 to 5 and Retrofitting Techniques using ETABS
Abstract: The finite element analysis has been carried out on six storey reinforced concrete frames using commercial finite element software ETABS. The performance of six storeys infilled frame failing due to improper design as well as inadequate reinforcements when seismic zone shifting from zone 3 to 5 was studied. The behavior of infilled frame considered in zone 5 was studied and compared with the results obtained from the analysis of frame …
Published in International Journal of Structural Engineering and Analysis · Vol. 3, Issue 2, 2017 · pp. 1–16 Read article
-
Comparison between with and without horizontal bracing on sloping and plain ground: seismic zone iii
Abstract: In this work, the structure selected for study is G+12 storied regular RC residential building. The seismic analysis of 5 bays (6m x 6m room size) buildings on varying slope angles were studied and compared with the same on the flat ground. The seismic forces of zone III were considered as per IS: 1893:2002 in STAAD.Pro software for the structural analysis. In this paper columns, plinth beams, slab beams and …
Published in International Journal of Structural Engineering and Analysis · Vol. 6, Issue 1, 2020 · pp. 1–14 Read article
-
Design Analysis of Offshore Petroleum Platforms
Abstract: Platform design is a difficult issue in deep offshores. Foundation of afloat structures is a platform to search afloat facilities at deep sea scaled. Offshore oil production is one of the most visible of these applications and represents a significant challenge to the design engineer. Offshore structures must function safely for design lifetimes of twenty-five years or more and are subject to very harsh marine environments. Some important design considerations …
Published in International Journal of Landscape Planning and Architecture · Vol. 5, Issue 2, 2019 · pp. 9–16 Read article