Search
9 articles for “Copper plate”
-
Electrochemical Etching on Copper Surfaces to Achieve Superhydrophobicity
Abstract: In the present study, an attempt has been made to create superhydrophobicity on copper substrate by etching the surface at different parameters (current density and time). Etching time was varied from 30 to 240 minutes. Untreated copper surface exhibited contact angle of 91.4°. The best etched surface exhibited a maximum contact angle of 142.1° for a current density of 0.01A/cm2 and etching time of 60 minutes. The structure–property relationship of …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 1, 2019 · pp. 27–31 Read article
-
Advanced Magnesium-Based Metallic GlassComposites for Biomedical Implant Applications: AMachine-Learning-Informed Approach
Abstract: Magnesium-based bulk metallic glasses (Mg-BMGs) combine strength, low density, and tunable degradability. Their amorphous matrix has a small plastic process zone. This zone is only about 4 μm wide. A small process zone keeps most glasses brittle. Adding a second phase is the best fix. This chapter extends Mg-BMGs to true composites. We call these Mg-based bulk metallic glass composites, or Mg- BMGCs. The chapter covers matrix engineering and interfacial …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 2, 2026 · pp. 48–65 Read article
-
Chemical and Nanotechnological Strategies for Enhanced Alopecia Treatment
Abstract: Over 50% of individuals suffer from androgenetic alopecia (AGA), a prevalent cause of hair loss that has historically been treated with oral finasteride and topical minoxidil, however, these have inconsistent results. Platelet-rich plasma (PRP), microneedling, and novel medication delivery devices are some of the recent developments in AGA treatment that are intended to enhance therapeutic results and patient satisfaction. In order to improve hair regrowth, this review looks at new …
Published in International Journal of Analytical and Applied Chemistry · Vol. 11, Issue 1, 2025 · pp. 1–15 Read article
-
Facile Synthesis and Electrochemical Exploration ofHexagonal Copper Sulfide (CuS) Nanocrystals for Energy Applications
Abstract: Copper sulfide (CuS) is a promising material for a variety of applications, including solar cells, lithium-ion batteries, sensors, and catalysts. In this current study, a facile technique for the synthesis of CuS nanocrystallites at modrate temperature 160°) without the use of any template or additives was reported. The reaction was carried out in a pressure reactor for 24 hours. he crystalline nature of the synthesized CuS nanocrystallites was confirmed using …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 12, Issue 1, 2026 · pp. 1–8 Read article
-
Facile Synthesis and Electrochemical Exploration ofHexagonal Copper Sulfide (CuS) Nanocrystals for EnergyApplications
Abstract: Copper sulfide (CuS) is a promising material for a variety of applications, including solar cells, lithium-ion batteries, sensors, and catalysts. In this current study, a facile technique for the synthesis of CuS nanocrystallites at modrate temperature 160°) without the use of any template or additives was reported. The reaction was carried out in a pressure reactor for 24 hours. he crystalline nature of the synthesized CuS nanocrystallites was confirmed using …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 12, Issue 1, 2026 · pp. 1–8 Read article
-
A Microstrip Rat-Race Coupler for Narrow-Band Operation in the X-Band
Abstract: This paper proposes, designs, describes, analyses, and simulates a novel microstrip rat-race coupler for narrow-band operations in the X-band (8 GHz to 12 GHz), namely the 9.5 GHz to 10.3 GHz sub-band. This proposed four-port passive microwave device was realized utilizing microstrip technology with pure copper (lossy) being used as a metal in the conducting layers (transmission and ground plates) and Rogers TMM6 (lossy) being used in the dielectric layer. …
Published in International Journal of Microwave Engineering and Technology · Vol. 7, Issue 1, 2021 · pp. 18–22 Read article
-
A Study on Stress Analysis of Aluminum Alloy Solidified in Metallic Molds
Abstract: Abstract The casting technique is regarded as the primary manufacturing process. It has several process parameters that affect the cast structure. Mold geometry is considered one of the most important metal parameters to cast. In the current work, the influence of mold geometries on mechanical properties (deformation and stress concentration) of liquid Aluminum alloy solidified in the steel mold is assessed using ANSYS simulation software. Molds were subject to a …
Published in International Journal of Manufacturing and Materials Processing · Vol. 10, Issue 2, 2024 · pp. 10–15 Read article
-
Electroforming Technology for Advanced Metal Fabrication
Abstract: Electroforming technology is a highly specialized process for fabricating a metal part by electro deposition in a plating bath over a base form or mandrel which is subsequently removed. On a mandrel, also known as a mold or matrix, which is removed, metal is electrodeposited. As a result, the coating turns into the product. Intricate parts made of nickel, copper, gold, and silver, such as molds, dies, waveguides, nozzles, and …
Published in International Journal of Manufacturing and Materials Processing · Vol. 10, Issue 1, 2024 Read article
-
In Vitro Evaluation of Bioremediation Capacity of a Commercial Probiotic, Bacillus clausii, for Chromium (VI) and Lead (II) Toxicity
Abstract: Heavy metals cause disastrous effects on any living organisms. Probiotics have the ability to reduce metal toxicity. Commercial probiotics having bioremediation capacity can use these bacteria as an alternative to conventional remediation methods. The bioaccumulation of heavy metals including chromium (VI) (Cr [VI]) and lead (II) (Pb [II]) causes fatal toxicity in humans. Some naturally occurring bacterial species, such as Bacillus and Pseudomonas, contribute their role in bioremediation of these …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 4, Issue 2, 2018 · pp. 1–16 Read article