Search
21 articles for “Sol Gel Method”
-
Synthesis of Silica Nanoparticles using Sodium Silicate Solution by Sol Gel Method
Abstract: The most commonly used route for synthesizing silica nanoparticles is sol-gel method due to its ability to produce monodispersed with narrow-size distribution nanoparticles at mild conditions. Recent advances in the sol-gel process for synthesis of monodispersed, narrow-size distribution nanoparticles have boosted the development of silica-polymer nanocomposites significantly. The focus of this research is on the synthesis of silica nanoparticles, size-dependent property characterization, and surface modification for the creation of homogenous …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 7, Issue 1, 2021 · pp. 28–31 Read article
-
An Analytical Study of Structural Optical Properties of CaAl2O4 Phosphors by Sol–Gel Method
Abstract: A comparative study of structure, morphology and optical properties of CaAl2O4 Phosphors by In this paper, monoclinic CaAl2O4 phosphor with various weight rate of aluminum was blended by low temperature sol–gel technique. The readied tests were described by X-beam diffraction (XRD) examination, Fourier change infrared (FTIR), checking electron microscopy (SEM), vitality dispersive spectroscopy (EDS) and photoluminescence discharge spectra (PL). The XRD examination demonstrated that CaAl2O4 have monoclinic structure. The normal …
Published in International journal of Nanobiotechnology · Vol. 2, Issue 1, 2016 · pp. 1–4 Read article
-
Evaluating Photo-Catalytic Application of TiO2 Nano Particles Augmented With H2O2 for Mineralization of Pharmaceutical Effluent
Abstract: Interest in the photocatalytic oxidation of non biodegradable organics from contaminated wastewater is growing rapidly. The photocatalytic activity of TiO2 nano particles synthesized via Sol-Gel method for the degradation of pharmaceutical effluent under UV light was discussed in this study. The TiO2 nano particles were characterized by X-Ray Diffraction (XRD) to determine size, Morphology Index, Specific Surface area and surface to volume ratio. The XRD results revealed that the TiO2 …
Published in International Journal of Metallurgy and Alloys · Vol. 4, Issue 1, 2018 · pp. 31–36 Read article
-
An Energetic Materials for Sustainable Solutions
Abstract: Nanomaterials are typically described as engineered substances possessing at least one dimension between 1 and 100 nm. Materials at the nanoscale display distinctive or enhanced characteristics, such as increased chemical reactivity, superior sensing performance, and improved mechanical properties. Nanotechnology provides a straightforward, rapid, clean, and cost-effective approach for synthesizing a wide range of organic compounds, encouraging many researchers to transition from conventional synthetic techniques. This article aims to highlight the …
Published in International Journal of Energetic Materials · Vol. 12, Issue 1, 2026 · pp. 7–12 Read article
-
Advanced Recent Synthesis and characterization of SnO2 NPs using Aristolochia bracteolata leaf Extract and multy Application
Abstract: The SnO2 nanoparticle was synthesised by sol-gel method and sonication technique. SnO2 nanoparticle using Aristolochia bracteolata leaf Extract. Aristolochia bracteolata is a shrup distributed in India, this family Aristolochiaceae, it is used in the medicine. The nanoparticle was characterized by HR-SEM with (EDX), (HR-TEM), XRD analysis, photoluminescence spectroscopy (PL) and UV-Vis DRS. This nanopartricles was photodegradation of Rhodamine B dye under the UV-light irradiation at 365 nm. The hydroxyl radical …
Published in International Journal of Green Chemistry · Vol. 4, Issue 2, 2018 · pp. 25–36 Read article
-
Developments of Photonic Ferroelectric Ceramic Compose
Abstract: This article is a study of imposed interposed crystal allotropic modification underexposure of electricity. Ferroelectric photonic ceramic powder and films are usual studied in preparation from adoptive transduction in the same crystal based on electrical gradient. Ferroelectric ceramics and thin films used to be processed by the sol-gel method, where empirical variables of interest have been their chemical composition, constituent phases, and microstructure. Functional attributes made metal oxide compose like …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 37–44 Read article
-
Eco-Friendly Synthesis of Nanoparticles: Advancing Green Methods Using Plant Extracts
Abstract: Nanotechnology, focusing on materials sized 1-100 nm, has garnered significant interest for its applications in agriculture, pharmaceuticals, and electronic devices. Nanomaterials, due to their unique properties, are pivotal in the development of advanced technologies such as drug delivery systems and nano-devices. Conventional nanoparticle synthesis methods, including sol-gel, chemical precipitation, microwave, and chemical vapor deposition, often involve hazardous chemicals, posing environmental risks. Therefore, there is a crucial demand for environmentally friendly …
Published in International journal of Nanobiotechnology · Vol. 10, Issue 1, 2024 Read article
-
Aerogel from Ceramic Composite
Abstract: This article is written from conferred articulated forms of aerogel. Sol-gel is a usual method toprepare aerogel. Compromise of inherent fragile mater under extensive moisture absorption tendencyof silica network has mitigated after inclusive of polyhedral oligomeric silsesquioxane (POSS)molecule. Long term applicability of silica aerogel has cited to confer superhydrophobic and flexibleconfigure based on synthesis by the catalysed sol-gel process; in accord of usual two-step method ofacid activation followed by basic …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 7, Issue 1, 2021 · pp. 1–12 Read article
-
Study of Mechanical Properties of Aluminum Nanocomposites using Auto Ignition Technique
Abstract: Al2O3 - high ZrO2 nanocomposite was synthesized by auto-ignition technique using metal nitrate and citric acid with a ratio of citrate: nitrate equal to 1:1.5. The precursor zirconium oxynitrite was derived from precipitation of zirconium oxycloride followed by dissolution of gel in nitric acid. The thermal decomposition behaviour of the gel was studied in order to study the decomposition behaviour and to determine the crystallization temperature. The effect of calcination …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 2, 2017 · pp. 36–42 Read article
-
Chemical Engineers at the Nanoscale: MakingNanomaterials That Work
Abstract: The convergence of chemical engineering and nanotechnology has created revolutionary prospects in material design, catalysis, energy storage, and biomedical applications. This article examines the changing responsibilities of chemical engineers in the creation and development of functional nanomaterials – substances designed at the molecular or atomic level to exhibit specific characteristics and functions. The article discusses important synthesis methods such as sol–gel processing, chemical vapor deposition, and self-assembly. It also talks …
Published in International Journal of Chemical Engineering and Processing · Vol. 11, Issue 2, 2025 · pp. 14–27 Read article
-
Design and Optimization of Heterogeneous Catalysts for Green Chemistry Processes
Abstract: The design and optimization of heterogeneous catalysts are critical for advancing green chemistry processes, aiming to minimize environmental impact while maximizing efficiency. This study explores innovative strategies for the development of heterogeneous catalysts that facilitate environmentally benign reactions. By integrating principles of catalyst design, surface science, and reaction engineering, we aim to enhance catalytic performance, selectivity, and stability. Catalyst composition and structure, investigating novel materials, including metal-organic frameworks (MOFs), zeolites, …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 10, Issue 1, 2025 · pp. 42–48 Read article
-
Preparation of PMMA Nanoparticles in Different Ways and Studying the Effect of Some Factors on Changing Its Properties
Abstract: Poly(methyl methacrylate) (PMMA) is usually made with the help of radical polymerization, coordination polymerization, and methyl methacrylate acid esterification. Due to its hardness, PMMA is widely used in the medical sciences, optical materials, electronics, and automotive industries. The present study aims to fabricate PMMA nanoparticles using different chemical methods such as sol-gel polymerization, co polymerization, etc. Various aspects of the synthesis process will be changed, such as temperature, reaction time, …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 2, 2022 · pp. 37–43 Read article
-
Schemes of Trace Selenium Nanoparticles on Earth
Abstract: This article is written about resources of selenium compatible with dosage-wise recovery from nature. Selenium (Se) above trace is toxic to human beings. The plant is the source of Se based on differential stages in botanical ethics from various parts of plants. Selenium found in nature as selenite, selenite, selenides, and seleno-proteins in plants. Se nanospheres related to a size considered as of importance in industry and biology acts. Antimicrobial …
Published in International Journal of Chemical Separation Technology · Vol. 7, Issue 1, 2021 Read article
-
Toxicity Evaluation for accumulation of nanoparticles in biological system
Abstract: Recent years have seen an unprecedented growth in the field of nanotechnology. The application of nanotechnology has risen and now has become a technical necessity in almost every technical field be it medical, therapeutic, cosmetics, agriculture, forensic, defence and many more still to come. Nanotechnology in pharmaceutical application typically involves encapsulation of any drug in “Nano” sized carrier ranging from metallic, polymeric, quantum dots, silicon based, polymeric micelles, liposomes and …
Published in International Journal of Applied Nanotechnology · Vol. 3, Issue 2, 2017 · pp. 1–7 Read article
-
Expedition to Nanosynthesis: A Review
Abstract: Semiconducting metal oxide (like SnO2, ZnO, Ga2O3, Co3O4,TiO2, WO3, etc.) based gas sensors are widely used for the detection of the gases like H2, CO, Nox, CH4 and other hydrocarbons due to its smaller particle size as well as higher surface to volume ratio. Presently several nanoforms of metal oxides like rods, combs, rings, springs, wires, belts, propellers are becoming popular in the field of optoelectronics, ultra-sensitive nanosized gas sensors, …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 2, Issue 1, 2016 · pp. 1–23 Read article
-
Advances in the Synthesis and Functional Applications of Crystalline Materials
Abstract: Crystalline materials represent one of the most important classes of advanced materials in modern science and engineering due to their highly ordered atomic arrangements and outstanding physical, chemical, electrical, optical, thermal, and mechanical properties. The periodic organization of atoms within crystal lattices provides exceptional opportunities for controlling and optimizing material performance through advanced synthesis strategies, crystal growth techniques, compositional modification, and defect engineering. Recent progress in materials science has enabled …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 12, Issue 2, 2026 Read article
-
Facile Fabrication of Durable Superhydrophobic Coatings on SS 304 for biomedical applications
Abstract: A simple and effective method to fabricate durable superhydrophobic coatings by combining shot-blasting and depositing sol-gel nanocomposite coatings on stainless steel SS 304 substrates has been investigated. Shot-blasting was used for two purposes; 1) as a method of physical modification for creating microscale roughness on the substrate and 2) for improving the adhesion of the nanocomposite coatings deposited thereafter. Organic-inorganic hybrid hydrophobic silica sol was synthesized where silica nanoparticles were …
Published in International journal of Nanobiotechnology · Vol. 4, Issue 2, 2018 · pp. 21–34 Read article
-
Recent Advancement of Nanotechnology in Plant Disease Management
Abstract: Nanoparticles are small size particles having potential to work in large surface area. Size of nanoparticles vary from 1-100 nm. The composition of nano-formulation should break down quickly in the soil and sluggishly in plants with remnant levels under the regulatory standards in foodstuffs. The nanoparticle synthesis methods can be categorized into bottom-up or top-down method Physical- Ball milling, nanolithography, pulsed laser, electrochemical; Chemical- Vaccum deposition and vaporization, chemical vapor …
Published in International Journal of Applied Nanotechnology · Vol. 7, Issue 2, 2021 · pp. 34–42 Read article
-
A Mini Review Practice of Formulations of Nanoparticles
Abstract: Nanomaterials and Nanotechnologies attract tremendous attention in recent researches. New physical properties and new technologies both in sample preparation and device fabrication evoke on account of the development of nanoscience. Various research fields including physics, chemists, material scientists, and engineers of mechanical and electrical are involved in this research. Synthesis of nanomaterials that are synonyms to quantum confined atom is an important milestone in the pursuit. Materials scientists and engineers …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 3, Issue 2, 2017 · pp. 1–7 Read article
-
Nanocomposite Hydrogels for Water Purification
Abstract: DNA hydrogels have been demonstrated as versatile catalysts, potential adsorbents, sensors and immobilization carriers of bioactive molecules. They are a type of tenuous, semiflexible polymeric network that consists of precisely designed synthetic nucleotide strands as chemical or physical cross-linkers. Hydrogels have been widely studied due to their improved physicochemical properties and used as antibacterial platforms, wastewater pollutants, adsorbents and drug deliverers. Because of their biocompatibility and the ability to mix …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 4, Issue 2, 2018 · pp. 17–21 Read article