Search
72 articles for “polyethylene glycol (PEG-6000)”
Nothing matched all of your words, so these match any of them.
-
A review - Inhancing the Performance of Self-Curing Concrete Using Polyethylene Glycol as an Internal Curing Agent
Abstract: Abstract—This study examines the use of Polyethylene Glycol (PEG-400) as an internal curing agent in concrete, offering a sustainable alternative to traditional water-curing methods. The research addresses the challenge of water scarcity in the construction industry by introducing a self-curing system capable of retaining internal moisture to support prolonged cement hydration. PEG-400, a water-soluble polymer, was added to concrete mixes at different dosages to assess its influence on hydration, shrinkage …
Published in International Journal of Concrete Technology · Vol. 12, Issue 1, 2026 · pp. 1–6 Read article
-
Self-Curing of Concrete Incorporated with Polyethylene Glycol
Abstract: Concrete is a combined mixture of cement, aggregates and water with or without suitable admixtures. Curing is the process of sustaining the proper moisture content to stimulate optimum cement hydration immediately after placement and to achieve desirable strength and other properties. In conventional curing of concrete, this is achieved by external supply of water after mixing, placing and finishing of concrete. In practice, the conventional type of curing is very …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 35–48 Read article
-
Investigation on Trans-esterification of Terephthalic Acid and Ethylene Glycol for the Production of Polyester Fibers.
Abstract: ABSTRACTThere have been considerable efforts to produce renewable polymers from biomass. Poly(ethylene terephthalate) (PET) is the most common thermoplastic polymer resin of the polyester family and is used in fibers for clothing, containers for liiquids and foods, thermoforming for manufacturing ,etc.The monomer bis(2-hydrooxyethyl) terephthalate can be synthesized by the esterification reaction between terephthalic acid and ethylene glycol with water as a byproduct, or by transesterification reaction between glycol and dimethyl …
Published in International Journal of Chemical Separation Technology · Vol. 6, Issue 2, 2020 · pp. 6–11 Read article
-
In Vitro Culture and Water Stress Tolerance Assessment in Banana (Musa Paradisiaca L.)
Abstract: This study investigates the in vitro culture and water stress tolerance of Musa paradisiaca L. (Banana) using a systematic approach to explant preparation, sterilization, media preparation, and stress induction. Banana explants were sourced locally and treated to ensure aseptic conditions. Murashige and Skoog (MS) medium, enriched with essential nutrients, vitamins, and plant growth hormones (IAA and BAP), served as the base for culturing. The study applied Polyethylene Glycol (PEG-6000) as …
Published in International Journal of Plant Biotechnology · Vol. 11, Issue 1, 2025 · pp. 42–53 Read article
-
An Analysis of the Mechanical Properties of Polyethylene Composites Reinforced with Short Vetiver Fibers
Abstract: Synthetic fibers (such as carbon, glass, ceramic fibers, etc.) are a cause of environmental concern, so natural fibers (such as vetiver, calotropis gigantea, flax, hemp, jute, etc.) are extensively used. In this study, the compression molding process was used to improve low-density polyethylene (LDPE) matrix composites reinforced with vetiver fiber (VF). Experiments were conducted by varying VF length, VF content, and fiber treatment time. The composites' static mechanical characteristics, including …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 1, 2025 · pp. 1–13 Read article
-
Study on Properties of Concrete Cured With Poly Ethylene Glycol-600
Abstract: After water, concrete is the most using material globally. Without concrete, the world is unimaginable. The foundation of civilization is concrete. Coarse aggregate, cement ,fine aggregate and water are the main ingredients in concrete, which requires curing to attain its strength. Concrete must therefore cure for 28 days in order to complete the necessary hydration, desired strength. For the traditional curing processes, a lot of water is needed. This becomes …
Published in International Journal of Concrete Technology · Vol. 8, Issue 2, 2022 · pp. 14–21 Read article
-
Experimental Studies on the Surface-Driven Microfluidic Flow of Dyed Ethylene Glycol in Polymer Microfluidic Devices
Abstract: In this experimental work, three individual microfluidic devices are fabricated by polymethylmethacrylate (PMMA) using maskless lithography, hot embossing lithography and direct bonding technique. Straight microchannel having uniform width along entire channel length is the chosen design of microchannels before fabrication. Dyed ethylene glycol is prepared and used as working liquid. Effect of channel aspect ratio on surface-driven capillary flow of dyed ethylene glycol is studied. CMOS camera is used to …
Published in International Journal of Analytical and Applied Chemistry · Vol. 6, Issue 2, 2020 · pp. 17–22 Read article
-
Passive Capillary Flow of Dyed Ethylene Glycol in the SU-8 based Glass Microfluidic Devices Fabricated by Microfabrication Technologies
Abstract: In this work, total 4 individual SU-8 based glass microfluidic devices are fabricated by the steps of maskless lithography and indirect bonding technique using author’s own hands-on completely. Dyed ethylene glycol (80% red dye, 20% ethylene glycol) is prepared as working liquid. The CMOS camera catching 25 frames per second with a corresponding time-scale resolution of 0.04 second is used to record the surface-driven capillary flow of dyed ethylene glycol …
Published in International Journal of Chemical Engineering and Processing · Vol. 5, Issue 1, 2019 · pp. 37–42 Read article
-
Short Report on Capillary Motion of Dyed Ethylene Glycol for Application towards the Gas Flow in Microfluidics
Abstract: In this experimental report, a couple of SU-8 based glass microfluidic devices are fabricated bymaskless lithography and indirect bonding technique. Each device is tested by the prepared dyedethylene glycol as working liquid. The microfluidic-leakage is recorded in the surface-drivencapillary motion of dyed ethylene glycol due to improper indirect bonding technique. The leakagefreesurface-driven capillary motion of dyed ethylene glycol is recorded due to proper indirectbonding technique. This experimental work is performed …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 7, Issue 1, 2021 · pp. 13–16 Read article
-
Effect of Coupling Agent on Organoclay Dispersion in Polyethylene/Organoclay Nanocomposites for Packaging Industry
Abstract: Low-density polyethylene (LDPE) is one of the most widely used polymers in various fields, but due to the hydrophobic nature of LDPE, it is hard to prepare an LDPE/clay nanocomposite. In this article, an LDPE/organoclay nanocomposite, which can be used in the packaging industry, was prepared by melt-blending organoclay with a polymer matrix (LDPE) and compatibilizer, low molecular weight oxidized polyethylene. The influences of organoclay, and compatibilizer during melt mixing …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 1, 2023 · pp. 1–11 Read article
-
Microbial and Enzymatic Degradation of Polyethylene: Molecular Mechanisms, Omics Approaches, and Biotechnological Applications
Abstract: Abstract: Polyethylene (PE), a commonly used synthetic polymer, is highly resistant to natural breakdown, leading to serious environmental and ecological issues such as soil and marine pollution, the formation of microplastics, and risks to wildlife and human health. Recent efforts have focused on using microbial and enzymatic processes to handle polyethylene waste. Microorganisms such as bacteria (Pseudomonas, Bacillus), fungi (Aspergillus, Penicillium), and algae produce enzymes like laccases, peroxidases, oxygenases, and …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 12, Issue 2, 2026 Read article
-
Kinetic Study of Polyester Derived from Glycolyzed PET Waste With Varied Composition
Abstract: In this investigation, the production of secondary value-added products, such as saturated polyester, derived from the glycolysis of poly(ethyleneterephthalate) (PET) is examined as an effective way for PET recycling. The glycolyzed PET (GPET) obtained was reacted with mixture of phthalic anhydride and glycol with varied composition and their reaction kinetic were studied. During polyesterification it was observed that degree of polymerization (DPn) and extent of reaction (p) is increased, while …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 Read article
-
Rheological Study of Waste Polyethylene Terephthalate with Bitumen Mix in Pavement Construction
Abstract: Plastic bags which are composed of polyethylene terephthalate (PET) is commonly used as for soft drink, water bottles and many other applications. However, disposal of this waste PET in large quantities constitutes an environmental problem, as it is considered as non-biodegradable materials. This study investigated rheological study of waste PET to be mixed with bitumen use as a raw material for pavement construction. The effect of temperature was varied from …
Published in International Journal of Chemical Separation Technology · Vol. 4, Issue 1, 2018 · pp. 36–48 Read article
-
Design of Novel Flexible Antenna Covering with Polyethylene Substrate
Abstract: In this article, novel flexible antenna is simulated under CST Software 2019. The new thing introduce in this research is that after designing flexible antenna on textile substrate, polyethylene substrate is used to cover the front of the flexible antenna. Is this done because when we wear flexible antenna at raining season then it gets wet which change all the properties and Charactertics of flexible antenna. Also, the dielectric constant …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 8, Issue 1, 2022 · pp. 25–33 Read article
-
Physico-mechanical, and Biodegradation Properties of Polyethylene/Food Polysaccharide Blends
Abstract: Hydrophilic/polar and hydrophobic/non-polar materials do not blend well, which causes issues in the production of biodegradable plastic. Plasticizer (glycerol) was one of the components added to the mixture to increase compatibility between the two materials; this also made the film less brittle. The purpose of this study is to look at how different food polysaccharide contents affect the physico-mechanical, and biodegradation characteristics of novel polymeric-based bio-composite films made from low-density …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 1, 2023 · pp. 1–13 Read article
-
Chemical Synthesis and Functional Engineering of Poly(lactide-co-glycolic acid) in Medicine
Abstract: Poly (lactide-co-glycolic acid) (PLGA) is one of the most extensively studied biodegradable polymers in modern medicine due to its excellent biocompatibility, tunable degradation behavior, and regulatory acceptance. Originally introduced in resorbable surgical sutures and implants, PLGA has evolved into a highly versatile platform for controlled and targeted drug delivery systems. This review presents a comprehensive analysis of PLGA’s chemical structure, synthesis methods, physicochemical properties, degradation mechanisms, and established clinical applications. …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 12, Issue 1, 2026 Read article
-
Investigations into the Features and Attributes of Low-Density Polyethylene/Thermoplastic Sago Starch Composites
Abstract: Low-density polyethylene, the material used to make most plastic shopping bags, has a considerable negative impact on the environment. It is enough intriguing for a substance to decay, develop for whatever reason (hydrolysis, Pseudomonas aeruginosa, etc.), and be exposed to the elements. Sodium trimetaphosphate was used in this experiment to treat sago starch. Using additives (glycerol/urea, 1% benzophenone, and epolene wax) in the same amount of starch, sago starch was …
Published in International Journal of Composite and Constituent Materials · Vol. 10, Issue 1, 2024 · pp. 10–23 Read article
-
Improvement of mechanical properties of recycled polyethylene with utilization of bio-filler
Abstract: Nowadays, the consumption of plastics all over the world has been tremendously growing, which is culminating into large amount of waste plastic material. It is believed that the management of solid waste is one of the major environmental concerns in the world. Due to limited space on landfills and increasing costs of plastics, utilization of waste plastics has become an attractive alternative for disposal. This research work describes the preparation …
Published in International Journal of Green Chemistry · Vol. 3, Issue 1, 2017 · pp. 18–26 Read article
-
Potato Starch-Based Polyethylene Composite: Fabrication and Evaluation
Abstract: This study's objective was to create and evaluate a biodegradable polymer composite consisting of potato starch (PS) and low-density polyethylene (LDPE). The effects of changing the PS content (10– 40 wt%) on the mechanical (elongation at break and tensile modulus), thermal (heat conductivity), and biodegradability characteristics of the polymer composite were examined. Next, it was examined how the cross-linking agent influenced the polymer composite's mechanical and thermal properties. The melt …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 2, 2022 · pp. 32–44 Read article
-
A Review on Processing of Waste PET (Polyethylene Terephthalate) Plastics
Abstract: Solid waste is essentially waste produced in our homes, businesses and industrial sources. Globally waste production is growing in volume and in toxicity. Plastic waste is a nature threat that is of great concern to the researches to refuse and reuse. The man-made systems emphasize the economic value of materials and energy where production and consumption are the extensive economic actions. Such systems are a threat to the environment as …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 Read article