Search
41 articles for “wear resistance.”
-
To Enhance Wear Resistance of Cast Iron Using Thermal Spray Coating Techniques
Abstract: In the present research work, an experimental study is being carried out to evaluate and enhance wear resistance of cast iron using thermal spray coating techniques. For this work, coating materials used were WC–Co–Cr and Ni–Cr in powdered form, and the coating was done by D-gun (detonation-gun) method. Wear behavior was investigated using pin-on disc apparatus at 30,40 and 50N on both coated and uncoated samples of cast iron, and …
Published in International Journal of Manufacturing and Materials Processing · Vol. 6, Issue 1, 2020 · pp. 1–5 Read article
-
Enhancement of Wear Resistance of AISI D2 Steel Slitter using Deep Cryogenic Treatment
Abstract: The cooling of material below-150C for sufficient soaking period is termed as deep cryogenic treatment (DCT). There is an improvement in wear resistance and hardness of tool and die steels due to deep cryogenic treatment. The improvement in wear resistance is observed due to precipitation of fine secondary carbides and even distribution of carbides. In present study, the slitters of AISI D2 cold work air hardening type tool steel are …
Published in International Journal of Manufacturing and Materials Processing · Vol. 7, Issue 2, 2021 · pp. 17–28 Read article
-
Fabrication and characterization of Aluminum-Granite-Graphite Metal Matrix Composite
Abstract: Moving machine elements are constantly subjected to wear and tear. Machine life can be improved by using hard and wear resistant materials. Most of machine elements are made of metals or alloys. These materials alone cannot meet the requirements of design of long-life machines. Naturally occurring hard materials lack the strength to withstand the machine loads. Composite materials provide the solution to such requirements. Based on requirement, a composite material …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 20–30 Read article
-
Experimental Investigation on Mechanical Failure of Bio-Implant Material for Orthopedic Applications
Abstract: Loss of limbs or destruction of bones in accidents and battle requires partial or complete replacement of the damaged body parts and bones in particular for complete recovery. The materials which can be used as artificial bio-implants for the replacement must be bio-Integrable as well as biocompatible with the host human body and possess very high mechanical properties to withstand high wear and stresses involved in various joints. Existing research …
Published in International Journal of Mechanics and Design · Vol. 6, Issue 1, 2020 · pp. 21–28 Read article
-
Three body Abrasive wear behavior of A356 Aluminum alloy in different Solution treated condition
Abstract: In the present study, solution treatment of A356 Al alloy was carried out in three different ways namely T4-Solution Treatment – TB Condition, T5-Precipitation (Ageing) – TE Condition and T6-Solution Treatment and Precipitation Hardening – TF Conditions. Three body abrasive tests were carried out for all the solution treated samples as well as base metal. The influence of the heat treatment on the microstructure, hardness and abrasive wear resistance behaviour …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 27–32 Read article
-
Analysis of Mechanical and Corrosion Properties of AISI50110 (EN31) Steel With and Without Heat Treatment
Abstract: The mechanical properties of steel decide its applicability for a particular condition. Heat treatment processes are commonly used to enhance the required properties of steel. The material was machined to ASTM standards and then different tests like microstructure analysis, hardness test, impact test, etc. were carried out after the heat treatment processes. All the tests were carried out in the mechanical workshops and laboratories under the supervision of their respective …
Published in International Journal of Metallurgy and Alloys · Vol. 1, Issue 1, 2015 · pp. 24–41 Read article
-
Microstructural and Hardness Study of A390/20wt.% SiC Functionally Graded Metal Matrix Composite
Abstract: Functionally graded materials are the upcoming new class of advanced materials, which exhibit gradual change in the microstructure and the composition in a definite direction, and hence variation in functional performance within a part. Functionally graded metal matrix composites (FGMMC) are FGM with metal and ceramic constituents. Aluminum-Silicon alloys are well-known for their unique combination of desirable characteristics, which includes excellent castability and less density combined with good mechanical properties. …
Published in International Journal of Manufacturing and Materials Processing · Vol. 6, Issue 2, 2020 · pp. 52–58 Read article
-
International Journal of Manufacturing and Materials Processing
Abstract: Friction and wear resistance were studied on SiC-based novel ceramic composite for applications in advanced automotive braking systems. In the present work, SiC-based ceramic composite was prepared by solid-state reaction synthesis route using a fine powder of precursors. The product was investigated for wear rate under different load conditions in the range from 10N to 70N and speed conditions in the range from 0.13 m/s to 0.52 m/s. The present …
Published in International Journal of Manufacturing and Materials Processing · Vol. 7, Issue 1, 2021 · pp. 14–24 Read article
-
Nanocrystalline Silicon Carbide for Implants
Abstract: Nanocrystalline silicon carbide (SiC) is a wannabe material for artificial heart valves fundamentally because of its low weight, high quality, intense hardness, wear resistance, latency (SiC does not respond with organic liquids), and disintegration resistance. Oxide clay materials, for example, alumina (Al2O3) and zirconia (ZrO2) are regularly utilized for restorative applications like inserts and prostheses due to their breathtaking biocompatibility and high wear resistance. Sadly, oxide earthenware production can't be …
Published in International journal of Nanobiotechnology · Vol. 2, Issue 1, 2016 · pp. 20–24 Read article
-
Parametric Analysis of Reciprocating Friction and Wear Behavior of PTFE Composite.
Abstract: When filler materials like carbon, graphite, glass fibres are added in the PTFE, a composite is formed which improves mechanical & thermal properties of that composite. It increases hardness and wear resistance, while the coefficient of friction is slightly affected and remains low. In this survey, we study various papers in which various methods & experiments were carried out for calculating friction & wear resistance of various compositions of polymers. …
Published in International Journal of Computer Aided Manufacturing · Vol. 4, Issue 1, 2018 · pp. 55–61 Read article
-
Enhancing the strength and flexibility of crowns and bridges: advances in materials, design, and nanotechnology.
Abstract: The continuous advancement in restorative dentistry has led to the integration of nanotechnology in the fabrication of crowns and bridges, significantly enhancing their mechanical and functional performance. Nano-enhanced materials, including nanoparticle-reinforced resin matrices, nanostructured ceramics, and nano-modified adhesive systems, demonstrate superior properties compared to conventional materials. These improvements are largely attributed to the uniform dispersion of nanoparticles, which enhances filler–matrix bonding, increases surface interaction, and reduces microstructural defects, resulting in …
Published in International journal of Nanobiotechnology · Vol. 12, Issue 1, 2026 · pp. 34–42 Read article
-
A look at friction stir processing for making better surface properties
Abstract: Abstract Friction stir processing is a surface properties modification method consequential from friction stir welding. The process uses a non-consumable tool made up of tool steel material. The tool pin and shoulder plunged in the surface of the base material plates and it mover along the predetermined path. The frictional heat stimulates the plastic deformation during the process & enhances the dynamic recrystallization. The process represents an advanced approach that …
Published in International Journal of Manufacturing and Materials Processing · Vol. 11, Issue 2, 2025 · pp. 41–47 Read article
-
A Comprehensive Review of the Development of Magnesium Composites and the Effect of Nanomaterials on Tribo-Mechanical Performance in Automotive Applications
Abstract: Abstract Magnesium and its alloys have emerged as promising lightweight materials for the automotive industry owing to their extremely low density, high specific strength, and potential to significantly improve fuel efficiency and reduce emissions. Despite these advantages, the widespread structural and functional application of magnesium alloys remains limited due to inherent challenges such as insufficient mechanical strength, poor wear resistance, low hardness, and high susceptibility to tribo-corrosion under severe service …
Published in International Journal of Manufacturing and Materials Processing · Vol. 12, Issue 1, 2026 · pp. 1–14 Read article
-
The Effect of Carbon Percentage on Structural Steel’s Compressive and Tensile Strength: A Literature Survey
Abstract: The fundamental necessity of this survey is to check the enhancement of the strength, hardness, dimensional stability and wear resistance by passing them through the cold temperature that enhance the hardness of the substance as a result of the increment in which it took place within the proportion of primary solid solution within the structure. If the type of methods mentioned in the article are employed in manufacturing and production …
Published in International Journal of Metallurgy and Alloys · Vol. 1, Issue 2, 2015 Read article
-
An analysis of ordained ferrocement workings on engineering properties of the structures
Abstract: Ferrocement is one of the most suitable development materials and it can be cast precast form . Ferrocement could be a flexible development material and it is utilized broadly in creating nations for housing, sanitation, water assets etc. The uses predestined Ferrocement components increase engineering properties of the structure and reduce the cost of construction and completion time. Ferrocement may be a flexible structural construction fabric won person properties of …
Published in International Journal of Structural Engineering and Analysis · Vol. 8, Issue 2, 2022 · pp. 25–30 Read article
-
Hardened Steel an Appliance with Low Degeneration
Abstract: Combination of high hardness, toughness, and strain hardening capacities with reasonable ductility have privileged Hadfield steel in sectors such as mining, transportation, military, agricultural and earthmoving equipment. Micro- porosities formation during casting by last solidifying liquids at inter-dendritic spaces in directional solidification have been insidious crack initiators during service exposure. Particulate penetration resistant wear part surfaces for secondary and tertiary crushers are found to add chromium and vanadium prone to …
Published in International Journal of Mechanics and Design · Vol. 5, Issue 2, 2019 · pp. 56–60 Read article
-
Tribological Behavior of Chilled Aluminum Alloy (LM-13) Reinforced with Titanium Carbide (TiC) Metal Matrix Composites for Automobile Applications.
Abstract: In the present research, aluminum alloy (LM13) Metal Matrix Composite (MMC) is prepared by stir casting technique and is reinforced with titanium carbide (TiC) particulates in the weight percent ranging from 3 wt.% to 15 wt.% in the steps of 3 wt.%. The dispersoid i.e. TiC particle size added varies between 100–200 µm. The resulting MMCs were solidified under the influence of copper chill of 25 mm thickness to study …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 2, 2020 · pp. 24–46 Read article
-
Sliding wear behavior of plasma sprayed NiCrAlY-WC based composite coatings on AA5083 alloy
Abstract: WC based coatings was deposited by thermal spray process have been extensively used in industrial application to counter abrasive type of wear. In this study, for the first time NiCrAlY-WC based composite coatings were deposited on AA5083 substrate by plasma sprayed coating technique. The composite coatings were characterized by optical microscopy (OM), scanning electron microscopy (SEM) and microhardness. Sliding wear behavior of coated and uncoated samples was carried out on …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 21–26 Read article
-
Experimental Investigations for Comparing the Effectiveness of Heat Treatment and Cryogenic Treatment on Wear Performance of EN-47 Spring Steel
Abstract: EN-47 spring steel is chromium, vanadium steel which consists of carbon (0.45–0.55%), manganese (0.50–0.80), silicon (0.50%), phosphorus (0.06%), and sulphur (0.06%) along with chromium (0.80–1.20%) and vanadium (0.15%). Due to this composition EN-47 spring steel become harder and tougher. It has a wide range of applications like crankshafts, steering knuckles, gears, spindles, pumps, suspension etc. So, in this experimental study we treated EN-47 spring steel with cryogenic treatment, cryogenic and …
Published in International Journal of Manufacturing and Materials Processing · Vol. 9, Issue 2, 2023 · pp. 1–9 Read article
-
A Comprehensive Review of Metal Matrix Composites (MMCs)
Abstract: Abstract Metal Matrix Composites (MMCs) combine metallic matrices with reinforcing phases (ceramics, intermetallics, fibers, or particles) to achieve superior mechanical, thermal, and tribological properties compared with monolithic metals. This review surveys fabrication routes, reinforcement types, microstructural characteristics, mechanical and tribological behavior, machining challenges, applications across aerospace, automotive, electronics, and future directions including additive manufacturing, in-situ MMCs, and data-driven materials design. Critical challenges such as interface control, scalability, cost, and machinability …
Published in International Journal of Manufacturing and Materials Processing · Vol. 11, Issue 2, 2025 · pp. 1–5 Read article