International Journal of Manufacturing and Materials Processing

A Review of Recent Developments in Solid State-Based Metal Additive Manufacturing: Friction Stir Additive Technique

  1. Utpal Kant ✉
  2. Sanjay Kumar
  3. Anant Prakash Agrawal
  4. Ankit Sharma

Abstract

In the age of machines, the whole industry needs light-weight and high strength for lighter devices, machines, etc. The core aerospace industry needs lighter materials for satellites and rockets. Friction Stir Additive Technology (FSAT)represents an innovative approach aimed at leveraging the principles of layered build (AM) layer by layer using solid state (FSW) friction stir welding technology. These represent a particular class of friction-based additive technology (FAT) and can easily be regarded as a significant breakthrough in the field of metal additive manufacturing (MAM). Due to the capabilities of the MAM technology used to create complex parts, they have come to be seen as a favourable option for the aerospace,automotive, and marine industries. Conversely, melt-based MAM technology has many limitations, primarily due to work hardening and insufficient shear strength issues.

Keywords

References (183)

  1. Manu Srivastavaa, Sandeep Ratheeb, Sachin Maheshwaric , Arshad Noor Siddiqueed, and T. K.
  2. Kundrae, A Review on Recent Progress in Solid State
  3. Friction Based Metal Additive Manufacturing: Friction
  4. Stir Additive Techniques, ISSN: 1040-8436 (Print) 1547-
  5. (Online) Journal homepage:
  6. https://www.tandfonline.com/loi/bsms20.
  7. H. Tinmaz, History of industrial revolutions: from homo
  8. sapiens hunters to bitcoin hunters, in: R.R. Rosa, A.
  9. Alberti, M. Singh (Eds.), Blockchain Technology for
  10. Industry 4.0. Blockchain Technologies, Springer,
  11. Singapore, 2020 https://doi. org/10.1007/978-981-15-
  12. A. Ramanathan, P. K. Krishnan, R.Muraliraja, A review
  13. on the production of metal matrix composites through
  14. stir casting – Furnace design, properties, challenges, and
  15. research opportunities, Journal of Manufacturing
  16. Processes,Volume 42, 2019, Pages 213-245, ISSN 1526-
  17. S. Chainarong, P. Muangjunburee, S. Suthummanon,,
  18. Friction Stir Processing of SSM356 Aluminium Alloy,
  19. Procedia Engineering, Volume 97, 2014, Pages 732-740,
  20. ISSN 1877-7058.
  21. Rosa Miranda, Introduction, Surface Modification by
  22. Solid State Processing, Woodhead Publishing, 2014,
  23. Pages xxiii-xxv, ISBN 9780857094681.
  24. Prince V. Cobbinah, Wallace R. Matizamhuka.
  25. Solid-State Processing Route, Mechanical
  26. Behaviour, and Oxidation Resistance of TiAl Alloys.
  27. Advances in Materials Science and
  28. Engineering 2019, Article ID 4251953.
  29. Sandeep Rathee, Sachin Maheshwari, Arshad Noor
  30. Siddiquee& Manu Srivastava. A Review of Recent
  31. Progress in Solid State Fabrication of Composites
  32. and Functionally Graded Systems Via Friction Stir
  33. Processing, Critical Reviews in Solid State and
  34. Materials Sciences 2018; 43:4, 334-366.
  35. Rajinder Kumar, Liquid state fabrication of metal
  36. matrix composite using stir casting, international
  37. journal of Advanced Research in Science and
  38. Engineering 2017.
  39. Tabish Qamar Hashmi, Liquid State Methods of
  40. Producing Metal Matrix Composites: A Review
  41. Article, IJRMET 2015; ISSN: 2249-5762.
  42. ShigehitoDeki, Sachihiko Iizuka, Asako Horie,
  43. Minoru Mizuhata, and Akihiko Kajinami, Liquid-
  44. Phase Infiltration (LPI) Process for the Fabrication
  45. of Highly Nano-Ordered Materials, Chemistry of
  46. Materials 2004 16 (9), 1747-1750.
  47. Manikanda Prasath. K, Vignesh. S. A Review of
  48. Advanced Casting Techniques. Research J.
  49. Engineering and Tech. 2017; 440-446.
  50. S. Singh, S. Ramakrishna, R. Singh, Material issues
  51. in additive manufacturing: A review, J. Manuf.
  52. Process. 25 (2017) 185–200. [10]
  53. S.A.M. Tofail, E.P. Koumoulos, A. Bandyopadhyay,
  54. S. Bose, L. O’Donoghue, C. Charitidis, Additive
  55. manufacturing: scientific and technological
  56. challenges, market uptake and opportunities, Mater.
  57. Today 21 (2018) 22–37.
  58. D.W. Rosen, Research supporting principles for
  59. design for additive manufacturing, Virtual Phys.
  60. Prototyp. 9 (2014) 225 232.
  61. C. Klahn, B. Leutenecker, M. Meboldt, Design
  62. strategies for the process of additive manufacturing,
  63. Procedia CIRP 36 (2015) 230–235.
  64. M.K. Thompson, G. Moroni, T. Vaneker, G. Fadel,
  65. R.I. Campbell, I. Gibson, A. Bernard, J. Schulz, P.
  66. Graf, B. Ahuja, F. Martina, Design for Additive
  67. Manufacturing: Trends, opportunities,
  68. considerations, and constraints, CIRP Ann. 65
  69. (2016) 737–760.
  70. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G.
  71. Murch, P. Templesmith, and C. J. Dawes: G.B.
  72. (1991) Patent Application No. 9125978.8.
  73. P.L. Threadgill, A.J. Leonard, H.R. Shercliff, P.J.
  74. Withers, Friction stir welding of aluminium alloys,
  75. Int. Mater. Rev. 54 (2009) 49–93.
  76. A. Barcellona, G. Buffa, L. Fratini, D. Palmeri, On
  77. microstructural phenomena occurring in friction stir
  78. welding of aluminium alloys, J. Mater. Process. 177
  79. (2006) 340–343.
  80. D.M. Rodrigues, C. Leit˜ao, R. Louro, H. Gouveia,
  81. A. Loureiro, High speed friction stir welding of
  82. aluminium alloys, Sci. Technol. Weld Joi 15 (2010)
  83. S. Jana, Y. Hovanski, G. Grant, Friction stir lap
  84. welding of magnesium alloy to steel: a preliminary
  85. investigation, Metall and Mat Trans A 41 (2010)
  86. V. Soundararajan, E. Yarrapareddy, R. Kovacevic,
  87. Investigation of the friction stir lap welding of
  88. aluminum alloys AA5182 and AA6022, J. Mater. Eng.
  89. Perform 16 (2007) 477–484.
  90. Q. Yang, S. Mironov, Y.S. Sato, K. Okamoto, Material
  91. flow during friction stir spot welding, Mater. Sci. Eng., A
  92. (2010) 4389–4398.
  93. H. Papahn, P. Bahemmat, M. Haghpanahi, C. Sommitsch,
  94. Study on governing parameters of thermal history during
  95. underwater friction stir welding, Int. J. Adv. Manuf.
  96. Technol. 78 (2015) 1101–1111.
  97. H.J. Liu, H.J. Zhang, L. Yu, Effect of welding speed on
  98. microstructures and mechanical properties of underwater
  99. friction stir welded 2219 aluminum alloy, Mater. Des. 32
  100. (2011) 1548–1553.
  101. G. Zhang, W. Su, J. Zhang, W. Zhongxin, Friction stir
  102. brazing: a novel process for fabricating Al/steel layered
  103. composite and for dissimilar joining of Al to steel,
  104. Metall. Mat. Trans. A 42 (2011) 2850–2861.
  105. S. Xie, R. Li, T. Yuan, C. Chen, K. Zhou, B. Song, Y.
  106. Shi, Laser cladding assisted by friction stir processing for
  107. preparation of deformed crack-free Ni-Cr-Fe coating
  108. with nanostructure, Opt. Laser Technol. 99 (2018)
  109. T. Nishihara, Development of friction stir forming,
  110. Mater. Sci. Forum 426–432 (2003) 2971–2978.
  111. M. Aonuma, K. Nakata, Effect of alloying elements on
  112. interface microstructure of Mg–Al–Zn magnesium alloys
  113. and titanium joint by friction stir welding, Mater. Sci.
  114. Eng., B 161 (2009) 46–49.
  115. G. Huang, X. Feng, Y. Shen, Q. Zheng, P. Zhao, Friction
  116. stir brazing of 6061 aluminum alloy and H62 brass:
  117. Evaluation of microstructure, mechanical and fracture
  118. behavior, Mater. Des. 99 (2016) 403–411. [77] H. Peng,
  119. R. Li, T. Yuan, H. Wu, H. Yan, Producing
  120. nanostructured Co–Cr–W alloy surface layer by laser
  121. H. Peng, R. Li, T. Yuan, H. Wu, H. Yan, Producing
  122. nanostructured Co–Cr–W alloy surface layer by laser
  123. cladding and friction stir processing, J. Mater. Res. 30
  124. (2015) 717–726.
  125. A.A. Stelt, T.C. Bor, H.J.M. Geijselaers, R. Akkerman,
  126. A.H. van den Boogaard, Cladding of advanced Al alloys
  127. employing friction stir welding, Key Eng. Mater.
  128. –557 (2013) 1014–1021.
  129. J.O. Milewski, Additive manufacturing metal, the art of
  130. the possible, in: Additive Manufacturing of Metals.
  131. Springer Series in Materials Science, Springer, Cham,
  132. , p. 258, https://doi.org/10.1007/978-3-319-58205-
  133. A. Ebrahimi, Application of Additive Manufacturing in
  134. Marine Industry, J. Mar. Sci. Eng. 5 (2015) 87–92.
  135. F. Froes, R. Boyer, B. Dutta, 1 - Introduction to
  136. aerospace materials requirements and the role of additive
  137. manufacturing, Editor(s): Francis Froes, in: Additive
  138. Manufacturing for the Aerospace Industry, Elsevier,
  139. Rodney Boyer, 2019, pp. 1–6.
  140. K.V. Wong, A. Hernandez, A Review of additive
  141. manufacturing, Int. Sch Res. Network 2012 (2012) 1–10.
  142. Y. Wang, Y.F. Zhao, Investigation of sintering shrinkage
  143. in binder jetting additive manufacturing process, Proc.
  144. Manuf. 10 (2017) 779–790.
  145. A. du Plessis, S.G. le Roux, G. Booysen, J. Els,
  146. Directionality of cavities and porosity formation in
  147. powder-bed laser additive manufacturing of metal
  148. components investigated using X-ray tomography, 3D
  149. Print Addit Manuf. 3 (2016) 48–55.
  150. H. Gong, K. Rafi, H. Gu, T. Starr, B. Stucker, Analysis
  151. of defect generation in Ti–6Al–4V parts made using
  152. powder bed fusion additive manufacturing processes,
  153. Addit. Manuf. 1–4 (2014) 87–98.
  154. M. Marya, V. Singh, S. Marya, J.Y. Hascoet,
  155. Microstructural development and technical
  156. challenges in laser additive manufacturing: case
  157. study with a 316L industrial part, Metall and Mater
  158. Trans B 46 (2015) 1654–1665.
  159. A. Yadollahi, N. Shamsaei, Additive manufacturing
  160. of fatigue resistant materials: Challenges and
  161. opportunities, Int. J. Fatigue 98 (2017) 14–31.
  162. S. Rathee, M. Srivastava, S. Maheshwari, T.K.
  163. Kundra, A.N. Siddiquee, Friction Based Additive
  164. Manufacturing Technologies: Principles for Building
  165. in solid state, Benifits, limitations and applications,
  166. st Edition, (2018) https://doi.org/
  167. 1201/9781351190879. [100] M. Srivastava, S.
  168. D. White, Object consolidation employing friction
  169. joining, Patents (2002), US6457629B1.
  170. W.M. Thomas, I.M. Norris, D.G. Staines, & E.R.
  171. Watts, Friction stir welding–process developments
  172. and variant techniques, in The SME Summit
  173. Oconomowoc, Milwaukee, USA (2005) 1-21.
  174. E.D. Herderick, Progress in additive manufacturing,
  175. JOM 67 (2015) 580–581.
  176. Z. Zhang, Z.J. Tan, J.Y. Li, Y.F. Zu, W.W. Liu, J.J.
  177. Sha, Experimental and numerical studies of re-
  178. stirring and re-heating effects on mechanical
  179. properties in friction stir additive manufacturing, Int.
  180. J. Adv. Manuf. Tech. 104 (2019) 767–784.
  181. Z. Zhang, Z.J. Tan, J.Y. Li, Y.F. Zu, J.J. Sha,
  182. Integrated modeling of process-microstructure-
  183. property relation in friction.214, September, 2019

Read more of it

Subscribe to one journal or build your own list of several. One invoice, one payment, access for a full year.

Subscribe to journals →

Publish your article

Peer-reviewed journals across every subject, with open access options. Send your manuscript to the right editor today.

Publish with us → Calculate your APC
Support