Roadside path holes convey a significant hazard to both pedestrians and drivers of motor vehicles. Road detection of damage is the responsibility of government agencies, which are made up of engineers and laborers. It is not practical to evaluate every section of the road efficiently by hand as it takes a long time and a large number of workers. The detection can be automated as a solution to this problem. The goal of the project is to gather and analyze a dataset of route holes so that the government can pinpoint their exact placement and take appropriate action. Path holes are found using the object detection engine. A system's design that may be uses to create a mobile application for path hole registration and presentation of relevant data and location is identified. Road upkeep is one of the most important problems in emerging nations. Bad road conditions increase the likelihood of traffic accidents, inflict misery on consumers, and damage to cars. Therefore, it is necessary to have a mechanism to report path holes on a large scale occurring in the routes on which people wish to take in real time. For the intent of managing and maintaining roads, it is also crucial to comprehend the state of the road surface. The road should be continually examined and repaired as needed to guarantee its condition. In order for avoiding accidents or damage to vehicles, this article suggests a practical and affordable way to locate road blind spots and immediately warn drivers of them. We have created a technique that will enable a car to collect information on the positions and depths of route fractures. This project is based on to alert the government like municipal department about the path holes.

Keywords:Path hole detection, Ultrasonic sensor, Peripheral Interface Controller (PIC 16F877A), Global system for Mobile Communications (GSM Module-800L), Global Positioning System (GPS Module-Neo 6m), Vibration sensor, Feedback control, Closed loop control, Limit switch.

🔒 This is a subscription article

Full text is available to subscribers and institutional members. Please choose an option below to access it.

1. Madhumathy P, Saurabh Singh, Shivamshukla, Unnikrishnan, Dayanandasagar .,2017. Detection of humps and Path holes on roads and notifying the same to the drivers, International Journal of Management and Applied Science, Volume-3, pp294- 326 .
2. Gurusamy, M. Anusha, N. Devipriya, P. Harini, MD Asrar Ul Haque.,2020. Speed Control of Vehicle by Detection of Path holess and Humps. International Journal of Broadband Cellular Communication Vol 6, p2.
3. R.M. Sahu, Mayank Kher, Nurul Hasan, Laxmi Pancha., 2018.Automatic Detection of Path holess and Humps on Roads to Aid Driver. International Journal of Engineering Science and Innovative Technology Volume 7,p334-338 .
4. Mohan Prakash, S. Brindha, S. Gowri, K. Latha maheswari.,2023. Implementation of vehicle speed limiting and Path holes identification using ultrasonic sensor. International Journal of Management and Applied Science .Volume-9,Issue-1.
5. Sundar, S. Hebbar, and V. Golla.,2017 Implementing intelligent traffic control system for congestion control, ambulance clearance, and stolen vehicle detection, International Journal of Recent Contributions from Engineering Science & IT IEEE vol. 15, no. 2, pp. 1109–1113.
6. Lin and Y. Liu., 2010 Path holess detection based on SVM in the pavement distress image, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering in Proc. 9th Int. Symp. Diatribe. Computer. Appl. Bus. Eng. Sci., pp. 544–547.
7. S. Rode, S. Vijay, P. Goyal, P. Kulkarni, and K. Arya, 2010 ., Path holes detection and warning system: Infrastructure support and system design, International Journal of Computer Trends and Technology in Proc. Int. Conf. Electron. Computer. Technol., pp. 286–290.
8. Kshitij Pawar, Siddhi Jagtap and Smita ,2020, Efficient Path holes detection using smartphone sensors.ITM Web of Conferences 32, pp 118-128.
9. Hyunwoo Song, KihoonBaek and Yungcheol Byun.,2020., Path holes Detection using Machine learning, Conference: Advanced Science and Technology, pp 544–
10. Koch and I. Brilakis, 2017., Improving Path holes Recognition through Vision Tracking for Automated Pavement Accessment, International Workshop on Intelligent Computing Engineering,
11. I. Rajab, M. H. Alawi, M. A. Saif.,2019 Application of Image Processing to Measure Road Distresses, WSEAS Transactions on Information Science& Application, Automating Highway Infrastructure Maintenance Using Unmanned Aerial Vehicles Issue 1, Volume 5, pp 118- 129.

Roadside path holes convey a significant hazard to both pedestrians and drivers of motor vehicles. Road detection of damage is the responsibility of government agencies, which are made up of engineers and laborers. It is not practical to evaluate every section of the road efficiently by hand as it takes a long time and a large number of workers. The detection can be automated as a solution to this problem. The goal of the project is to gather and analyze a dataset of route holes so that the government can pinpoint their exact placement and take appropriate action. Path holes are found using the object detection engine. A system's design that may be uses to create a mobile application for path hole registration and presentation of relevant data and location is identified. Road upkeep is one of the most important problems in emerging nations. Bad road conditions increase the likelihood of traffic accidents, inflict misery on consumers, and damage to cars. Therefore, it is necessary to have a mechanism to report path holes on a large scale occurring in the routes on which people wish to take in real time. For the intent of managing and maintaining roads, it is also crucial to comprehend the state of the road surface. The road should be continually examined and repaired as needed to guarantee its condition. In order for avoiding accidents or damage to vehicles, this article suggests a practical and affordable way to locate road blind spots and immediately warn drivers of them. We have created a technique that will enable a car to collect information on the positions and depths of route fractures. This project is based on to alert the government like municipal department about the path holes.

Keywords:Path hole detection, Ultrasonic sensor, Peripheral Interface Controller (PIC 16F877A), Global system for Mobile Communications (GSM Module-800L), Global Positioning System (GPS Module-Neo 6m), Vibration sensor, Feedback control, Closed loop control, Limit switch.

🔒 This is a subscription article

Full text is available to subscribers and institutional members. Please choose an option below to access it.

1. Madhumathy P, Saurabh Singh, Shivamshukla, Unnikrishnan, Dayanandasagar .,2017. Detection of humps and Path holes on roads and notifying the same to the drivers, International Journal of Management and Applied Science, Volume-3, pp294- 326 .
2. Gurusamy, M. Anusha, N. Devipriya, P. Harini, MD Asrar Ul Haque.,2020. Speed Control of Vehicle by Detection of Path holess and Humps. International Journal of Broadband Cellular Communication Vol 6, p2.
3. R.M. Sahu, Mayank Kher, Nurul Hasan, Laxmi Pancha., 2018.Automatic Detection of Path holess and Humps on Roads to Aid Driver. International Journal of Engineering Science and Innovative Technology Volume 7,p334-338 .
4. Mohan Prakash, S. Brindha, S. Gowri, K. Latha maheswari.,2023. Implementation of vehicle speed limiting and Path holes identification using ultrasonic sensor. International Journal of Management and Applied Science .Volume-9,Issue-1.
5. Sundar, S. Hebbar, and V. Golla.,2017 Implementing intelligent traffic control system for congestion control, ambulance clearance, and stolen vehicle detection, International Journal of Recent Contributions from Engineering Science & IT IEEE vol. 15, no. 2, pp. 1109–1113.
6. Lin and Y. Liu., 2010 Path holess detection based on SVM in the pavement distress image, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering in Proc. 9th Int. Symp. Diatribe. Computer. Appl. Bus. Eng. Sci., pp. 544–547.
7. S. Rode, S. Vijay, P. Goyal, P. Kulkarni, and K. Arya, 2010 ., Path holes detection and warning system: Infrastructure support and system design, International Journal of Computer Trends and Technology in Proc. Int. Conf. Electron. Computer. Technol., pp. 286–290.
8. Kshitij Pawar, Siddhi Jagtap and Smita ,2020, Efficient Path holes detection using smartphone sensors.ITM Web of Conferences 32, pp 118-128.
9. Hyunwoo Song, KihoonBaek and Yungcheol Byun.,2020., Path holes Detection using Machine learning, Conference: Advanced Science and Technology, pp 544–
10. Koch and I. Brilakis, 2017., Improving Path holes Recognition through Vision Tracking for Automated Pavement Accessment, International Workshop on Intelligent Computing Engineering,
11. I. Rajab, M. H. Alawi, M. A. Saif.,2019 Application of Image Processing to Measure Road Distresses, WSEAS Transactions on Information Science& Application, Automating Highway Infrastructure Maintenance Using Unmanned Aerial Vehicles Issue 1, Volume 5, pp 118- 129.