All articles
544 articles
-
Hydrogen Peroxide Decomposition to Water: A Review Process
Abstract: The term "thermal" refers to the presence of heat. Breaking down is the action of decomposing. If a materials temperature is raised, it goes through a chemical process called thermal breakdown. At high temperatures, thermal breakdown processes occur. Before breaking into the products, the reactants absorb a lot of energy. The reactant is the beginning chemical. It decomposes to simpler entities, that might be either elements or compounds. Hydrogen peroxide …
Published in International Journal of Energetic Materials · Vol. 8, Issue 1, 2022 · pp. 17–20 Read article
-
Cause of a Serious Condition Blasts’ Liquid for Airbag Classification
Abstract: The explosion was fairly strong, and the entire unit was blasted into the air. In front of the airbag, there is a thin layer of plastic casing, which is ripped by the pressure that is developing within during the explosion. The airbags inflate as a result of the explosion. The chemical used in the airbag is sodium azide. These detectors in front of the automobile transmit an electrical impulse to …
Published in International Journal of Energetic Materials · Vol. 8, Issue 1, 2022 · pp. 38–42 Read article
-
A Model for Plastic-Hydrolytic Damage Bioresorbable Polymer Composites
Abstract: This paper explains and assesses a recently developed constitutive model for elastic-damage that may sustain plastic-hydrolytic damage. When a metallic material is subjected to plastic strain, voids and microcracks in the metal matrix start to form, develop, and merge. This is what causes ductilitydegradation in metals. Only a few of the many models that have been presented to depict ductile failure have done a thorough analysis of the entire damage …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 23–27 Read article
-
Useful Medicinal Operative: Innovative Formulation of Zoloft
Abstract: A highly effective antidepressant is active metabolite hydrochloride. Zoloft is one of those drugs with one or even more asymmetrical centres where the biological effects of the isomers vary significantly from one another. Depression, dependence, and other anxiety-related illnesses are all treated with sertraline hydrochloride, which selectively blocks serotonine reuptake. The preferred configurations should typically be created as early as feasible in the biosynthesis of sertraline, which has two asymmetric …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 19–22 Read article
-
Review of Composites formed of Thermoplastic as Organic Fibers
Abstract: Composites made of structural monomers gave rise to thermoplastic polymers (TMCs). Due to their usage of a thermoplastic matrix, these materials really aren't chemically reactive. TMCs may be remoulded without degrading when heated and become softer. They harden into the final shape when they cool. Thermoplastic materials bonded with plant fibers may one day be used to create impact- absorbing structure for renewable power. Its impact features of organic fiber-reinforced …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 28–33 Read article
-
Study of Heavy Metal ion adsorption from Synthetic Wastewater with the help of biomass and analysis of Mathematical Model
Abstract: The biofilm matrix is a mixture of secreted polymers, metabolites and nutrients ingested, lysis solution products, and even particle debris. This matrix, which is polyanionic by nature, is essential for the activated carbon of metal cations. In this study, the heavy metal adsorption mechanism in biofilms is modelled in one spatial dimension. The numerical method is a free-boundary value issue for nonlinear parabolic and quadratic partial differential equations. Parabolic equations …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 45–56 Read article
-
Study of PLA and its Synthesis Kinetics
Abstract: In this project we studied about Polylactic Acid and its production kinetics. The most often found optically active hydroxycarboxylic acid is lactic acid (LA, also known as 2-hydroxypropionic acid). In the form of L-and D-Lactic Acid, this chiral molecule may be found. The building blocks of polylactide are carboxylic acid monomers produced by fermentation of sugars from renewable sources, such as sugar cane, beet root, or corn starch. These sugars …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 16–27 Read article
-
Effects of Coupling Agent and Nanoclay on the Mechanical, Morphological and Dimensional Stability of Natural Fiber/Polypropylene Composites
Abstract: Polymer nanocomposite is made up of polymer as a matrix ingredient and reinforcement ingredient as a filler in the form of nanometer particles. These ingredients have dissimilar physical and chemical features and are mixed to generate sole features of nanocomposites. Polypropylene (PP) was nominated as the polymer matrix ingredient. Reinforcement ingredients used include organically modified montmorillonite with natural fiber. Various composites based on polypropylene, natural fiber, and organically modified montmorillonite …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 9–18 Read article
-
Basic Principles and Techniques in Powder Metallurgy
Abstract: This study provides a brief overview of recent advances in powder metallurgy methods, and their applications as challenges encountered throughout the research. The primary goal of this paper is to showcase the different uses of modern powder metallurgy technology and to inspire visitors to learn more about these topics and produce more papers about it. Metallic injection moulding (MIM) is another term for advanced powder metallurgy. The technique could be …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 1, 2022 · pp. 1–4 Read article
-
Study the Structural behavior of Copper Nanoparticle using Polyol Method
Abstract: An easy methodology for the preparation of well-dispersed copper nanoparticles by polyol method, victimization 1-hexadecylamine as a protectant within the encompassing medium, has been developed. The size and form of the Nanoparticles are controlled by the polyol method and one in all the wide used ways to induce needed shape of Nanoparticles. Generally, PVP is uses as stabilizer for forming smaller size nanoparticles however extremely non-uniform, during this paper proposing …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 1, 2022 · pp. 27–32 Read article
-
Mercerization and Mechanical Properties of Natural Fibre Reinforced Composite: A Comprehensive Review
Abstract: Growing public concern about environmental issues has prompted the production of renewable, economical, and ecologically friendly materials. Thus a shift from synthetic fiber reinforced composites to natural fiber reinforced composites can be seen. Since Fibre reinforcement is deciding factors in the Structural properties of any engineered composite. But poor interfacial adhesion of fibre matrix obstruct it's potential while using in structural applications. Different studies suggested that the surface modification techniques …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 1–8 Read article
-
Study the Microwave Characteristics of Nanocomposites for Strengthening Building Materials
Abstract: The paper depicts the consequences of microwave portrayal of composite structure material comprising of layers of plastics, fiber glass and paste. The consistency of the block test of such a material has been assessed involving examining standard horn receiving wire in the recurrence range 7-12 GHz. Resounding monopole radio wire dove into the example has been utilized for assurance of comparable complex permittivity in the recurrence range 0.7-6 GHz. Non-uniform …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 1, 2022 · pp. 19–26 Read article
-
Review of Piezoelecric Energy Harvesting Through Footsteps
Abstract: In this modern world, growth of technology is highly increased and the human population. So, we have planned to connect these two things to harvest electrical power which is the ultimate source of all those technologies. This paper presents a literature review of generating power by using piezoelectric materials which converts human’s footsteps into electrical energy. Many smart materials are used to generate power from many sources. In those, piezoelectric …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 1, 2022 · pp. 14–18 Read article
-
Deployment of SEED Sensors Using Biocomposite Substrate Based on RFID Technology
Abstract: As normal assets keep on turning out to be progressively scant internationally, cultivating innovation for agrarian creation to take care of the world has been headed to turn out to be more exact and productive. As of late a sensor has been created to address these necessities by straightforwardly checking the dirt climate remotely to assist with further developing harvest wellbeing and yields. The Sensing Earth Environment Directly (SEED) sensor …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 1, 2022 · pp. 33–40 Read article
-
Re-use of Hazardous Wastes
Abstract: Utilization enables one to reach the risky stage of life. The earth's response to rising garbage has a significant influence on environmental assets. These resources are being consumed by humans and feel the illness in health. Inadequate survey of waste generated and to be shifted. A structured strategy that forces a more in-depth investigation of waste minimization and generation. This waste can be used by two series of steps: by …
Published in International Journal of Energetic Materials · Vol. 8, Issue 1, 2022 · pp. 12–16 Read article
-
Corrosion Protection of Rebar steel in Ocean Atmosphere
Abstract: Rebar is an important engineering metal. It is used in construction of housing, bridge and other infrastructures works. It is surround with concrete for strengthen building block components. The concentration of chloride ions in ocean atmosphere is higher so it produces hostile environment for rebar steel. The lots of porosities are available on the outer surface area of concrete so chloride ions enter inside by osmosis or diffusion process. It …
Published in International Journal of Energetic Materials · Vol. 8, Issue 1, 2022 · pp. 1–11 Read article
-
Photon activated tunneling in ABO3 type Multiferroic domain wall
Abstract: We present photon assisted tunneling in multiferroics of type ABO3. It is seen that the interactions of photons with this analytic molecule accelerate the electron transmissions. It is clarified that the existence of ferromagnetic, ferroelectric, and piezoelectric in multiferroic materials are consequence of magnetic anisotropy, dipole segregation and strain. The effect of photon is therefore, to disassemble existing electronic states or assemblesto form new electronic states by enhancing its transmission …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 1, 2022 · pp. 1–13 Read article
-
Plastics Compressive Strength Testing
Abstract: Compression test is a mechanical test that determines how much compressive force a material to resist before cracking. A gradually applied load compresses the test item, which is commonly in the shape of a square, pyramid, or cylinder, between the platens of a compression-testing machine. Many ductile metals, such as mild steel, have extremely high compression strength, yet measuring them is challenging. Whenever a load is given to a ductile …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 2, 2021 · pp. 46–50 Read article
-
Review on Protection Materials of Astronaut’s Space Suits During Space Flights
Abstract: Protective suits are among the few complex and one-of-a-kind items of improving technology. It was basically miniature personal aircraft that provide astronauts with the protection they need such in space. The sheer intricacy of existing in space necessitates the use of several products and parts in the creation of a space suit. A spacesuit is a high pressure suit that astronauts wear during space missions. It's made to keep them …
Published in International Journal of Energetic Materials · Vol. 7, Issue 2, 2021 · pp. 13–18 Read article
-
Study on Hazardous Explosives
Abstract: The Mining sector uses explosives to extract ore and discover orebodies, according to the Canadian Explosives Research Laboratory. Oil and gas companies use them to construct pipelines, the forest business uses them to construct roads, and the construction industry uses them to construct infrastructure. Explosives are required by the aerospace sector to power the rockets that launch satellites into orbit. Among other things, explosives are necessary for the rocket fuel …
Published in International Journal of Energetic Materials · Vol. 7, Issue 2, 2021 · pp. 26–33 Read article