All articles
104 articles
-
Mechanical Behavior of AA7075/Glass Fiber Reinforced Polymer Composites
Abstract: This paper reports on the mechanical properties of As-cast and heat-treated AA7075 polymer composites reinforced with glass fibers from 1 to 5 wt%. The polymer composites were fabricated using the Compo casting method, in which short glass fibers were introduced into the vortex created in the molten alloy through an impeller rotated at 500 rpm. The molten mass was thoroughly stirred and poured into permanent molds and squeezed under pressure. …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 2, 2020 · pp. 11–20 Read article
-
Corrosion Inhibition Studies of Triazinedithiol Inhibitors for Mild Steel in an Acid Chloride Solution
Abstract: Two environmental pleasant triazine dithiol inhibitors 6-diallylamino-1,3,5-triazine-2,4-dithiol monosodium (DAN)and 6-dibutylamino-1,3,5-triazine-2,4-dithiol monosodium (DBN) was synthesized and their corrosion inhibition for slight metallic in a 1 M HCl solution turned into studied the usage of weight reduction methods, electrochemical measurements, and scanning electron microscopy (SEM) techniques. The inhibition efficiency of both DAN and DBN improved with increases in inhibitor concentration but decreased with increases in temperature. Results from potentiodynamic polarization and EIS …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 2, 2020 · pp. 1–10 Read article
-
Nano Ultraviolet Finishing of Textiles Using Inorganic UV- Blockers–The Sustainable Approach of Producing Protective Clothing for Better Tomorrow
Abstract: The diminution of the ozone stratum,due to global warming, is likely to intensify existing health effects caused by exposure to ultraviolet (UV) radiations, as stratospheric ozone is a predominantly effective UV radiation absorber. As the ozone layer becomes thinner, the protective filter provided by the atmosphere is gradually abridged. Subsequently, human beings and the environment are exposed to higher UV radiation levels, particularly higher UV-B levels, which have the greatest …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 1, 2020 · pp. 23–33 Read article
-
Medicinal Application of Nano Composites of Al 8081 Alloy/Tib2 in Acid Chloride and Neutral Chloride Mediums at Laboratory Temperature
Abstract: Nanomaterials are at the leading edge of the rapidly growing subject of nanotechnology. Their precise size-dependent homes make these materials advanced and imperative in any areas of human activity. This brief review tries to summarise the maximum latest developments in the subject of carried out nanomaterials, specially their application in biology and medicine, and discusses their commercial is at ion prospects. This paper evaluates corrosion properties of TiB2/Al8081 alloy immediately …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 1, 2020 · pp. 8–14 Read article
-
Targeted Drug Delivery and Nanotechnology: An Overview
Abstract: Targeted drug delivery is a special form of drug delivery system where the medicament is selectively delivered or targeted only its site of action and keeping rest part of the body relatively free. Drug is a substance used for prevention, diagnosis, treatment and cure of a disease.Drug and medicine are synonym of each other and commonly used interchangeable. But there is minor difference in between both the terms. Drug is …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 1, 2020 · pp. 34–38 Read article
-
Dielectric Barrier Discharge Plasma Processing on Pristine PMMA Surfaces for Microfluidic Applications towards Applied Nanotechnology
Abstract: In this experimental work, a total of six individual microchannel bends as microfluidic devices are fabricated by maskless lithography, hot embossing lithography and direct bonding technique using polymethylmethacrylate (PMMA). Air dielectric barrier discharge (DBD) plasma processing is the selected surface modification technique in this particular experimental work. Dyed aqueous ethanol (10% ethanol, 90% dyed water) is the prepared working liquid to study the microfluidic flow characteristics. Effect of channel aspect …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 1, 2020 · pp. 1–7 Read article
-
Experiments on the Passive Capillary Flow of Aqueous Ethanol in Sudden Expansion Microchannels towards the Applications in Nanofluidics and Nanoelectromechanical Systems
Abstract: In this work, total three individual sudden expansion microchannels are designed and fabricated by maskless lithography, hot embossing lithography and direct bonding technique inside the cleanroom laboratory. Polymethylmethacrylate (PMMA) is used as the selected polymer to fabricate these microchannels. Aqueous ethanol (15% ethanol, 85% dyed water) is prepared and used as dyed working liquid. Surface-driven (passive) capillary flow of prepared working liquid is recorded by a CMOS camera corresponding to …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 1, 2020 · pp. 15–22 Read article
-
A Review on Carbon Nanotubes
Abstract: Carbon nanotubes (CNTs), one of the unique one-dimensional nanomaterials, have gained great attention because of their specific characters, versatile functionalization chemistry, and biological compatibility in the past few decades. In this paper author tried to discuss some important features, different types of CNTs, synthesis methods, purification techniques, some properties and application of the CNTs in various sectors. At last there is conclusion and some scope for research work is also …
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 2, 2019 · pp. 27–34 Read article
-
Synthesis of NiCo2O4 by Hydrothermal Method
Abstract: The synthesis of NiCo2O4 have been carried out by hydrothermal method. Powder x-ray diffraction studies confirmed the formation cubic NiCo2O4. Nickel cobaltite are high in electrical conductivity and has two richer electroactive sites. To some extent, NiCo2O4 is playing an important role in complementing or replacing electrode materials based on NiO, Co3O4 and RuO2 in energy storage field.
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 2, 2019 · pp. 23–26 Read article
-
Synthesis and Characterization of Nanostructured LaNiO3
Abstract: In this world synthesis of LaNiO3 have been carried out by co-precipitation method respectively. Powder x-ray diffraction studies confirmed the formation of rhombohedral LaNiO3. LaNiO3 is known to have rhombohedrally distorted perovskite structure, and the lattice parameters of the rhombohedral unit cell and the pseudocubic unit cell are a = 5.46¡ and ¢ = 60.8o and a = 3.84Å respectively. The superconductivity in these oxides is a novel phenomenon, even …
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 2, 2019 · pp. 12–17 Read article
-
The new method of composite materials production
Abstract: The existing methods for production, for example, polymer composite materials: the pressing (direct, injection, profile), the injection molding (injection, intrusion, centrifugal molding, and autoclaving), the extrusion, the pultrusion, the contact molding, the winding, vacuum molding and pneumatic molding do not permit to reach the main goal of the production of unique composite materials with a basis (matrix) filled by uniformly distributed filler (armoured element), having high strength and rigidity. The …
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 2, 2019 · pp. 18–22 Read article
-
A Review on Green Inhibitors to Corrosion of Steel
Abstract: Traditions of green corrosion inhibitors are described to elucidate soybean oil derivatives, Spondias cytherea leaves, Rosmarinus officinalis L. leaves, Chrysophyllum albidum; Tridax procumbens L. leaves, roasted coffee, Jatropha curcas leaves, Propolis, Manilkara zapota fruit peel, avocado, Canna indica flower. Green inhibitors are ever praised due to environmentally friendly usage. Industrial feasibility is studied from laboratory simulations. Carbonated drink corrosion of steel is most acceptable to use green inhibitors. Corrosion in …
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 1, 2019 · pp. 12–21 Read article
-
Study of optical properties for five ring hexagonal photonic crystal fiber
Abstract: In this paper, basically, we have investigated about different optical properties for five-ring hexagonal photonic crystal fiber. Silica glass as material for PCF is taken and different parameters analyzed like, Effective refractive index, confinement loss and Waveguide dispersion. Properties are analyzed by varying the key design parameters like air hole diameter and lattice pitch. The comparative study of the results for different design parameters is analyzed. It has been observed …
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 1, 2019 · pp. 28–33 Read article
-
Highly Birefringence and Flattened Dispersion Photonic Crystal Fiber for Polarization Maintaining
Abstract: In this paper we present flattened dispersion and highly birefringence photonic crystal fiber. Higher Birefringence is required in sensing to maintain the linear polarization by reducing polarization coupling. The Flattened dispersion is used broadband and telecommunication application. This paper structure is hexagonal pcf with circular air-holes and we calculate the pcf property like effective index, dispersion, birefringence, confinement loss. This PCF is designed by COMSOL Multiphysics Software.
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 1, 2019 · pp. 22–27 Read article
-
Corrosion Inhibitors for Steel Appliances
Abstract: Inhibitors of corrosion in stainless steels are based on alloy developments. Effects of various alloy elements are to form passive film on surfaces under corrosive conditions. Tendency of passive film formation has rendered stainless steel to be applicable for any sector except bio-medical purposes. Line pipe of flow lines and gathering lines are suggested to use conventional carbon steel pipe with cost effective inhibitors. Duel phase stainless steels or improved …
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 1, 2019 · pp. 1–7 Read article
-
Particle Size Measurement of Porous Silicon Particles: A Short Review
Abstract: Nano particles of increasingly smaller particle size and various material compositions are being developed for the pharmaceutical, bio-medical, electronics, optoelectronics, energy, catalyst and ceramic industry. These nanoparticles are very much useful in numerous applications of nanoscience and nanotechnology field. Several nanoparticles can be formed and dissolved in aqueous or liquid medium. Porous silicon film can be fabricated by reaction induced vapour phase strain etch method and porous silicon nanoparticle can …
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 1, 2019 · pp. 8–11 Read article
-
Review on Gold Nanoparticles and Their Applications
Abstract: Gold nanoparticles are attention because of the outstanding properties (e.g., size and shape depending optical, electrical, and magnetic properties) which can be included into antimicrobial applications, biosensor materials, composite fibers, cryogenic superconducting materials, cosmetic products, and electronic components The properties of Au NPs are different from their bulk form due to the increased surface-to volume ratio determined by the assembly of the Au NPs and the inter-particle interaction. This review …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 2, 2018 · pp. 32–39 Read article
-
Influence of Concentration Variation of Chemical Pre Treatments on Tensile Properties of Coir Fibre Reinforced Composites
Abstract: Composite material consisting randomly oriented coir fibres and epoxy resin have been studied. This study tends to analyze the tensile properties of coir fibre (10mm length) reinforced with epoxy resin by treating with Na0H and KMn04 of different concentrations. Fibers are bonded together with epoxy resin by hand layup process and cured at room temperature for 24 hours to form composite. Different tensile properties of composite were investigated in accordance …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 2, 2018 · pp. 13–20 Read article
-
A review on E-waste: National & International Scenario
Abstract: Electrical and electronic waste (e-waste) is one of the fastest growing municipal solid waste stream in the world. The existing management practices related to E-waste in most of countries are reasonably poor and have the potential to risk both human health and the environment. According to recent studies, only about 6 percent of the E-waste is recycled, of which 95 percent is recycled through the informal sector. E-waste recycling in …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 2, 2018 · pp. 21–31 Read article
-
Development of Epoxy Based Hybrid Composite Reinforced with Jute and Glass-fiber and Effect of Silicon Carbide additive on it’s Mechanical Properties
Abstract: In this project, an effort is made to compare the improvement of the matrix material properties because of the presence of the fillers and additives. Initially, hand lay-up process was carried out in a mold of known dimensions to layup jute fibers of varying weight percentages in the epoxy matrix. Another composite with glass fibers of similar weight percentages to that of jute were laid up in epoxy matrix in …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 2, 2018 · pp. 8–12 Read article