Search
34 articles for “brick”
-
Performance of Bricks and Brick Masonry in Aggressive Chemical Environment
Abstract: Abstract In India, the use of burnt clay bricks in dwellings is common since the ancient Indus civilization. In buildings, bricks are used in brick masonry, reinforced brick work and in some cases as coarse aggregate in the construction of foundation base. The performance of brick masonry depends upon the quality of bricks, quality of masonry work and the prevalent environmental conditions which have to be faced by the structure. …
Published in International Journal of Structural Engineering and Analysis · Vol. 1, Issue 2, 2015 · pp. 1–12 Read article
-
Development of Fly Ash Bricks Using Alccofine as Partial Replacement of Cement
Abstract: With the growing technology in bricks industry and urbanization there is lot of requirements of raw material. Due to the limited availability of non-renewable resources, it is imperative to use additional waste materials when producing bricks in order to protect these resources. To combat the problem of environmental contamination, waste materials like fly ash, silica fume, and blast furnace slag can be utilised in place of clay. So using fly …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 2, 2022 · pp. 19–26 Read article
-
Manufacturing of Reinforced Composite Fly Ash Bricks – Product Analysing and Development Using Value Engineering Techniques
Abstract: The key driver of Indian economy is structured by the infrastructure development. This sector is principally responsible for thrusting India’s overall development and an intensive focus from government for initiating policies that would propose alternate methods and materials for which the end products ensuring high quality, non-degradable, time-bound creation of world class infrastructure in the country. Infrastructure sector includes power, bridges, dams, roads, and urban infrastructure development, which requires huge …
Published in International Journal of Manufacturing and Materials Processing · Vol. 4, Issue 1, 2018 · pp. 12–19 Read article
-
Analytical Modeling of Brick–Mortar Couplet
Abstract: This paper is a presentation of the finite element modeling of stress in a brick–mortar couplet. The brick–mortar couplet here serves as a meaningful substitute for a brick wall structure. In this work, the basic steps in derivation of the element stiffness matrix for a plane stress problem using the displacement approach are presented. The main purpose in the work is to verify the nodal displacements, which in turn would …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 1, 2020 · pp. 5–13 Read article
-
Review On Eco-Brick: A Sustainable Solution for Plastic Waste
Abstract: Abstract - Traditional waste management methods like incineration and landfilling are no longer sustainable solutions because they result in greenhouse gas emissions, toxic gas release, soil degradation, and groundwater contamination. As a result, innovative and environmentally responsible alternatives are desperately needed. The rapid accumulation of non-biodegradable plastic waste has become a critical global environmental issue due to its long-lasting nature, harmful ecological effects, and difficulties associated with its disposal. Plastic …
Published in International Journal of Sustainable Building Technology · Vol. 9, Issue 1, 2026 · pp. 25–32 Read article
-
Life Cycle Assessment of Traditional Clay Bricks and Autoclaved Aerated Concrete (AAC) Blocks: A Comparative Study in Environmental Sustainability
Abstract: Abstract: In today's construction industry, the imperative to merge quality with environmental responsibility has prompted a profound paradigm shift towards eco-friendly construction materials. This study conducts a comprehensive examination of the environmental impacts associated with traditional bricks and Autoclaved Aerated Concrete (AAC) blocks, with a specific focus on Life Cycle Assessment (LCA). While traditional bricks, steeped in historical significance, offer durability and high thermal mass, their kilning process raises significant …
Published in International Journal of Architecture and Infrastructure Planning · Vol. 10, Issue 1, 2024 · pp. 55–64 Read article
-
Evaluation of Strength in Natural Bricks by Using Mineral Admixtures
Abstract: In the construction field nowadays substructures and superstructure are adopted by bricks only for the framed type of structure and also load bearing wall adopted for bricks in super structure works. Last four decades in our Tamil Nadu more number of bricks were used for the buildings. In this work, it is decided to design an alternate to clayey soil with addition of stabilisers such as fly ash, rice husk …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 85–89 Read article
-
Sludge as a Raw Material for Manufacturing of Bricks
Abstract: Dumping of sewage sludge is one of the leading problems of sewage treatment plant. Thus, productively using of sewage sludge for manufacturing of bricks can be a better option to minimize the sludge disposal problems as well as save natural resources required for manufacturing of conventional bricks. Our work focuses on the conversion of the sludge into a construction material and use as a raw material for bricks and also …
Published in International Journal of Sustainable Building Technology · Vol. 3, Issue 2, 2020 · pp. 57–60 Read article
-
Aerocon Bricks
Abstract: Various low-cost housing projects are considered by a growing demand chiefly due to urbanisation. The collection of building materials should chance the requirements of local conditions to enhance quality of life for the most needed ones by building new structures and/or by improving existing structures. Various studies showed that a big variety of wall materials have been used in different building systems with traditional and modern construction methods, but only …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 37–48 Read article
-
Strength and Durability Characteristics of Stabilized Compressed Laterite Soil Bricks
Abstract: In this experimental investigation the required numbers of test bricks were moulded for the various percentage proportionate of laterite soil, such as, 91%, 90%, 89%, and 88%, stabilized with various percentage of cement stabilizer viz 4, 5, 6 and 7%, respectively, along with 5% addition of sand constantly; compacted with a hydraulic press paver block and brick making machine. Based on the obtained results laterite soil bricks can be used …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 1, 2018 · pp. 58–64 Read article
-
Utilization of Brick Dust and Rice Husk Ash for Sustainable Cement Replacement in M20 Grade Concrete
Abstract: AbstractThe study evaluates the influence of replacing cement with Fly Ash, Brick Dust, and Rice HuskAsh on the compressive strength of concrete. Cement replacement was conducted at varyingpercentages (5%, 10%, 15%, 20%, 25%, 30%, 35%, and 40%) for M20 grade concrete, andcompressive strength was assessed at 7, 28, 90, and 180 days. The results demonstrate thatpartial cement replacement can achieve comparable or improved strength performance up to anoptimal level, beyond …
Published in International Journal of Concrete Technology · Vol. 11, Issue 2, 2025 · pp. 1–5 Read article
-
Effect of Fly Ash on Compressive Strength of Mortar and Brick Aggregate Concrete
Abstract: This paper presents tse influence of fly ash on compressive strength of mortar and brick aggregate concrete. A lot of tests were done about strength of fly ash concrete all over the world. In those experiments, stone chips were generally used as coarse aggregate. In this experiment locally available materials such as burnt clay brick chips as coarse aggregate, sand and fly ash available in Bangladesh (Indian fly ash) were …
Published in International Journal of Concrete Technology · Vol. 7, Issue 1, 2021 · pp. 7–23 Read article
-
Development of Geo-Polymer based Light Weight Bricks
Abstract: Light weight geopolymer bricks were developed during this study. The mix was made with lime sodium silicate and fly ash as ingredients. A maximum shrinkage was observed at CaO lime ratio of 1.0. Bulk densities were also lower at the ratio of 1.0. The maximum cold crushing strength (CCS) value was found at the ratio of 0.745. Increase in mix water decreased the strength. Water content of 24% is recommended …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 1, Issue 1, 2015 Read article
-
Manufacturing of interlocking brick with cement- lime mortar and hyposludge
Abstract: Lime is still a valuable building material that is frequently used in construction as lime mortar. Hydrated lime can be added to concrete mixes used to make blocks and other concrete products. Sugarcane mud, also characterized as filter cake, is a byproduct of the sugar purification process. The introduction of these components into the environment pollutes it. There have been several attempts to address these difficulties. A experiment of manufacturing …
Published in International Journal of Concrete Technology · Vol. 8, Issue 2, 2022 · pp. 1–7 Read article
-
Behavioural Study of Black Cotton Soil with Brick Kiln Dust and Fly Ash.
Abstract: Now a days with increasing population the quantity of waste materials is goes on increasing. This waste material growth is so dangerous that, it affects the lives of humans and animals for example generation of plastic waste of one of the important problem at present condition. Also in industrial area proper disposal of waste material can be seen in very less amount. Therefore by considering this as a problem to …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 4, Issue 2, 2018 · pp. 8–15 Read article
-
Development of Bricks from Waste Material
Abstract: Concrete is the mostly used material all around the world, but there is lots of problems releted to it. As concrete after is life can be dismantled in waste, a large amount of waste of concrete is produced all over the world which have scrap value of zero, it gets totally wasted and of no us. After analysis about the problem, we come to a conclusion that this waste of …
Published in International Journal of Sustainable Building Technology · Vol. 6, Issue 1, 2023 · pp. 29–35 Read article
-
Performance Evaluation of Geopolymer Masonry Units Using Fly Ash and GGBFS: Dimensionality, Density, Water Absorption, and Compressive Strength Analysis
Abstract: AbstractThis study investigates the production, properties, and performance of geopolymer masonry units,utilizing Class F fly ash and Ground Granulated Blast Furnace Slag (GGBFS) as primary binders.These binders were activated using an 8M alkaline solution, with the materials mixed alongsidemanufactured sand (M-sand) as the fine aggregate. The binder-to-aggregate ratio was maintained at1:1, while the alkaline solution-to-binder ratio was kept at 0.2. Various geopolymer masonry units,including geopolymer bricks (GPB), solid blocks (GPSB), …
Published in International Journal of Construction Engineering and Planning · Vol. 10, Issue 2, 2024 · pp. 26–32 Read article
-
Sustainable Technology and Architecture for Mud House Building
Abstract: Mud is a liquid or semi-liquid mixture of water and a combination of different kinds of soil (loam, silt, and clay). It usually forms after rainfall or near water sources over time to form sedimentary rock such as shale or mudstone generally called Lutites. There are several major attractions associated with earth buildings such as cost saving, self-satisfaction, aesthetics, eco-friendly, human health, etc. Earth buildings are of two types: Adobe …
Published in International Journal of Sustainable Building Technology · Vol. 1, Issue 2, 2018 · pp. 25–29 Read article
-
NEXT-GENERATION TRAFFIC OPTIMIZATION SYSTEM
Abstract: Abstract- Traffic lights at intersections automatically adjust based on the flow of traffic. Reinforcement learning enables continuous learning and optimization for more effective traffic control. Traffic lights are dynamically adjusted thanks to sensors that collect real-time data on the number of cars. By predicting the condition of the roads, predictive analytics helps avoid traffic jams. reduces stop-and-go traffic, which in turn reduces fuel consumption and pollution. A scalable system designed …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 11, Issue 2, 2025 · pp. 1–7 Read article
-
Experimental Study on Different Types of Insulating Layers in Multilayer Wall Structures
Abstract: The present study reports thermal profile observations related to the on-field experiments in hot dry climatic zone on four identical test building structures each having dimension 2×2 sq. ft. (0.61×0.61 sq. m.) but with different insulating layers. The experiments have been performed at Kota, Rajasthan, India. All four structures are made of fly ash brick wall and roof is made of concrete. Concrete roof is made on wood slab. In …
Published in International Journal of Architecture and Infrastructure Planning · Vol. 6, Issue 1, 2020 · pp. 9–17 Read article