Search
406 articles for “stress”
-
Steel in Marine Weather
Abstract: Offshore structures of steel are reviewed after suitable application at onshore. Coat of stitch pad wet weld heat treat is subjected to improve the properties from high strength low alloy steel. Underwater welding with or without environment has modifications from the use of weld heat to heat treat, selection of electrodes containing silicates and polymer agglomerates to induce more heat of weld and penetration. Typical coat crack detect inswing from …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 1, 2021 · pp. 1–8 Read article
-
Corrosion Resistance in Modern Metallurgical Alloys: Mechanisms & Mitigation Strategies
Abstract: Corrosion resistance in metallurgical alloys is a critical factor in their application across various industries, including aerospace, automotive, marine, and construction. This paper delves into the fundamental mechanisms of corrosion, such as galvanic, pitting, crevice, intergranular, and stress corrosion cracking, which significantly affect the longevity and reliability of alloys. It explores the intrinsic and extrinsic factors influencing corrosion behavior, including alloy composition, microstructure, environmental conditions, and mechanical stresses. Advancements in …
Published in International Journal of Metallurgy and Alloys · Vol. 9, Issue 2, 2023 · pp. 30–34 Read article
-
Advancement in Nanodiagnostic for Plant Pathogen Detection
Abstract: Nanotechnology refers to a nanoscale innovation, which has promising applications in everyday life. The word nanotechnology is generally used when referring to materials with the size of 0.1 to 100 nanometers. Nanotechnology is a multi-displinary science involving knowledge fro biology, chemistry, physics and other disciplines. The nanoparticles have small size, large surface area and high reactivity. These properties of nanoparticles revolutionized the agriculture researches. Rapid disease detection, targeted treatments, enhancing …
Published in International journal of Nanobiotechnology · Vol. 4, Issue 2, 2018 · pp. 1–7 Read article
-
NANO-BOOSTED TOMATOES: UNRAVELLING THE POTENTIAL OF NANOTECHNOLOGY IN HYDROPONICS
Abstract: Hydroponics, an innovative soilless plant cultivation technique, has emerged as a sustainable approach for growing tomato crops, addressing challenges like water-use efficiency and reduced reliance on pesticides, contributing to sustainable tomato production. The integration of two cutting-edge technologies, Nanotechnology and Hydroponics, introduces the concept of "smart agriculture." This involves the use of nanofertilizers, often referred to as "smart fertilizers," which facilitate efficient nutrient delivery, leading to enhanced plant growth and …
Published in International journal of Nanobiotechnology · Vol. 9, Issue 2, 2023 · pp. 1–9 Read article
-
Study of Mechanical Properties of Aluminum Nanocomposites using Auto Ignition Technique
Abstract: Al2O3 - high ZrO2 nanocomposite was synthesized by auto-ignition technique using metal nitrate and citric acid with a ratio of citrate: nitrate equal to 1:1.5. The precursor zirconium oxynitrite was derived from precipitation of zirconium oxycloride followed by dissolution of gel in nitric acid. The thermal decomposition behaviour of the gel was studied in order to study the decomposition behaviour and to determine the crystallization temperature. The effect of calcination …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 2, 2017 · pp. 36–42 Read article
-
Bauschinger Effect on Micro-Lattice of Ti-6al-4v Implants by Using Finite Element Analysis
Abstract: This research's primary objective is to apply the Bauschinger effect to develop a micro-lattice of titanium alloy implants using nonlinear finite element analysis. In orthopedics, micro-lattice cellular Ti-6Al-4V designs with controlled porosity and pore sizes that are good for tissue ingrowth and biological mechanisms are often used. In this investigation, CAD models of various unit lattice structures were generated using Intra-Lattice software, incorporating design parameters such as strut length, strut …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 1, 2023 · pp. 18–24 Read article
-
Finite Element Analysis of Composite Pressure Vessel with Non-Geodesic Fiber Trajectory In view of Friction Factors on Cylinder and End Domes
Abstract: Composites are materials created by dissimilar materials with a view to improve the properties or to create materials with desired properties. Progressive Fiber Polymer Composites have developed as an essential class of industrial materials for load carrying applications with well-rounded properties for many industrial and social applications. Structures like pressure vessels, pipes and motor casings made-up of Filament Winding technology are widely used in aerospace applications. Conventionally, pressure vessels were …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 2, 2021 · pp. 9–21 Read article
-
Experimental Investigation To Study the Effect of Heat Treatment on Mechanical Properties and Microstructure of Duplex Stainless Steel
Abstract: The broad aim of this paper is to study the enhancement in mechanical properties of duplex steel by thermomechanical processing. Solution annealing followed by water quenching, hot rolling to 10% and 30%, cryo-rolling to 80% and 90% and ageing at 600°C and 1000°C for 5 hrs were the treatments given. The cryo-rolled samples were used for impact testing and rest for tensile testing. Microstructural analysis was done after the various …
Published in International Journal of Mechanics and Design · Vol. 2, Issue 2, 2016 · pp. 32–42 Read article
-
Experimental Study and Analysis of Coefficient of Friction for Mild Steel Under Various Lubrication Conditions
Abstract: The coefficient of friction plays decisive role in the metal-forming processes. This study focuses on determination of the coefficient of friction between work piece and lubricants using ring compression test by experiments physical modeling and finite element (FE) simulation. A series of ring compression tests were carried out to obtain friction coefficients of mild steel under lubricants including boric acid, Vaseline, grease and dry conditions. According to Male and Cockcroft …
Published in International Journal of Manufacturing and Materials Processing · Vol. 4, Issue 2, 2018 · pp. 34–42 Read article
-
Review Paper on Thermal Analysis of Non-Vented (solid) Disc Brake using Ansys Software
Abstract: The disc brakes are exposed to large thermal stresses and heat during routine braking. The extraordinary thermal stresses, tremendous heat occurred in the disc during hard braking. The aim of the project or research work is to design and analysis of disc. The modelling or design of the disc is done using solid works software. The Thermal analysis is to be done on the Non-vented disc brakes using ANSYS software …
Published in International Journal of Computer Aided Manufacturing · Vol. 1, Issue 1, 2016 · pp. 01–06 Read article
-
Finite Element Modelling and Structural 3d Static of the Mechanical Behavior of Dry Contacts Slipping Between the Disc and the Brake Pads
Abstract: The aim of this contribution is to present a study based on the determination of the structural deformations due to the contact of slipping between the disc and the pads. The results of contact described in this work relate to displacements, Von Mises stress and contact pressures of the pad at various moments of simulation. One precedes then the influence of some parameters on the computation results such as rotation …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 2, Issue 1, 2016 · pp. 23–43 Read article
-
An Optimum Stringer for Straight and Curved Stiffened Panels Using X-FEM Techniques
Abstract: In this study, crack growth, modeling and simulation of various stiffened stringers, unstiffened straight and curved cracked panels are presented using commercially available finite element software package. Computation of stresses and convergence of stress intensity factor for single-edge notch specimens computed using finite element method (FEM) and extended finite element method (X-FEM) and compared with analytical solution. X-FEM techniques like cohesive segment method and linear elastic fracture mechanics, using virtual …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 4, Issue 2, 2018 · pp. 1–11 Read article
-
identification of triggering factors of migraine
Abstract: Headache disorders, especially the primary types, are considered as major global health problems due to their high prevalence, their almost life-long duration and their substantial disability burden upon the patients 1. The most common primary headaches are tension-type headache and migraine. Migraine headaches may take place due to various triggering factors. One or more triggering factors can be detected in a migraine patient. The important triggers are stress, weather changes, …
Published in International journal of Nursing Science Practice and Research · Vol. 2, Issue 2, 2016 · pp. 33–40 Read article
-
E.M.E.R.G.E. (Empowering Mixed-Use Ecosystem Realms for Revenue, Growth, & Expression).
Abstract: Contemporary urban life is increasingly fragmented, with learning, working, socializing, & leisure dispersed across disconnected parts of the city. This disconnection leads to long commutes, enhances dependence on mobility, increases daily stress, and weakens public life & community interaction. Rigid zoning laws & mono-functional building typologies fail to respond to the hybrid, layered, & dynamic patterns of everyday urban life, particularly within the context of emerging digital economies and evolving …
Published in International Journal of Housing and Human Settlement Planning · Vol. 12, Issue 2, 2026 Read article
-
Issues and Challenges in Using Metro Network for WorkCommute in Pune & PCMC Area: A Study Towards Sustainable Urban Mobility
Abstract: Urban mobility within Pune and PCMC has rapidly transformed due to fast- growing urbanisation and ongoing metro network development project. Though the metro is envisioned as a sustainable mass transit system to reduce traffic congestion, fuel consumption, and environmental impacts, its network pattern are creating challenges for daily work commutes. Both metro network connectivity and existing public transport networks affect commuting efficiency and travel choices. In several metro corridors, these …
Published in International Journal of Landscape Planning and Architecture · Vol. 12, Issue 2, 2026 Read article
-
Evaluation of Deformation Behavior of a Structural Pipe Bracket Under Static Loading Using Finite-Element Analysis
Abstract: This study presents a comprehensive structural integrity assessment and comparative static response analysis of an industrial support bracket subjected to varying mechanical loading conditions using the finite element method (FEM). Industrial brackets are essential load-bearing components in mechanical and structural systems, where adequate stiffness, strength, and dimensional stability are critical for ensuring operational reliability and structural safety. The primary objective of this investigation is to evaluate the influence of material …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 2, 2026 · pp. 1–12 Read article
-
Animal Biotechnology: Finding a Balance Between New Ideas and Morality
Abstract: Animal biotechnology has become a revolutionary subject that combines genetics, farming, and medicine. It offers new ways to solve global problems like food security, disease management, and drug manufacturing. Scientists have used genetic engineering, cloning, transgenesis, and genome editing to make livestock more productive, generate animals that are immune to disease, and make useful scientific models. Transgenic animals are also being utilized more to make therapeutic proteins and help with …
Published in International Journal of Animal Biotechnology and Applications · Vol. 12, Issue 1, 2026 Read article
-
Barriers to Advanced Reproductive Technologies in the Subsistence Dairy Farming Systems: Key Constraints and the Way Forward
Abstract: The adoption of advanced reproductive technologies (ARTs) in subsistence dairy farming remains limited despite their potential to enhance genetic improvement, fertility rates, and overall productivity. This study explores the key constraints hindering the integration of ARTs, including artificial insemination, embryo transfer, and ovulation synchronization, within small-scale dairy production systems. Financial constraints, lack of awareness, inadequate veterinary support, and socio-cultural resistance are identified as primary barriers. Limited access to affordable credit, …
Published in International Journal of Animal Biotechnology and Applications · Vol. 12, Issue 1, 2026 Read article
-
Barriers to Advanced Reproductive Technologies in the Subsistence Dairy Farming Systems: Key Constraints andthe Way Forward
Abstract: The adoption of advanced reproductive technologies (ARTs) in subsistence dairy farming remainslimited despite their potential to enhance genetic improvement, fertility rates, and overall productivity.This study explores the key constraints hindering the integration of ARTs, including artificialinsemination, embryo transfer, and ovulation synchronization, within small-scale dairy productionsystems. Financial constraints, lack of awareness, inadequate veterinary support, and socio-culturalresistance are identified as primary barriers. Limited access to affordable credit, high costs ofreproductive inputs, and …
Published in International Journal of Animal Biotechnology and Applications · Vol. 12, Issue 1, 2026 Read article
-
The Economical Managements Model of Corrosion Protection of Materials
Abstract: Corrosion affects many sectors, including industries, railways, transportation systems, marine environments, construction, housing components, engineering tools, metallic structures, and even biomedical implants. Due to corrosion, major financial losses occur in these fields. Corrosion takes place because of changes in the internal morphology of materials, or the attack of corrosive substances present in the environment. These unfavorable physical, chemical, and biochemical reactions lead to various forms of corrosion such as galvanic …
Published in International Journal of Metallurgy and Alloys · Vol. 12, Issue 2, 2026 · pp. 1–11 Read article