Search
347 articles for “Soil”
-
Monitoring Fungi Transport Influenced by Heterogeneous Porous Sand Gravel Formation in Coastal Area of Port Harcourt
Abstract: This paper monitors the transport of fungi concentration in sand gravel formation, the formation were observed to develop heterogeneity in porous deposited strata, the migration process of fungi were observed from the simulation values through graphical representation, fluctuation of fungi concentration were experienced on the process of migration in exponential phase, the deposition of micronutrients were found to be under fluctuation in the soil thus affect the growth rate of …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 1, 2018 · pp. 49–57 Read article
-
Planning, Estimation, Costing, and Scheduling of Commercial Building using MS Project
Abstract: Planning, estimation, and scheduling are very important in a construction project and it helps toavoid delays in the project. The current project deals with planning, costing, estimation, andscheduling of office buildings. It is a G+5 reinforced concrete framed structure with modern features.The emergency exit and slope have been provided at the opening of the building for hassle-freemovement of disabled people. The building is planned in accordance with the National Building …
Published in International Journal of Construction Engineering and Planning · Vol. 7, Issue 1, 2021 · pp. 14–35 Read article
-
Manufacturing of interlocking brick with cement- lime mortar and hyposludge
Abstract: Lime is still a valuable building material that is frequently used in construction as lime mortar. Hydrated lime can be added to concrete mixes used to make blocks and other concrete products. Sugarcane mud, also characterized as filter cake, is a byproduct of the sugar purification process. The introduction of these components into the environment pollutes it. There have been several attempts to address these difficulties. A experiment of manufacturing …
Published in International Journal of Concrete Technology · Vol. 8, Issue 2, 2022 · pp. 1–7 Read article
-
Analysis of Geological Structure for the Application of Geotechnical Engineering to Optimize Thermal Extraction in Geothermal Wells
Abstract: The characterization of the geological terrain for geothermal applications from the heat transfer point of view has been made. Horizontal, vertical and inclined geological layers have been analyzed. Uniform and homogeneous terrain are better candidates for low or high enthalpy geothermal applications while heterogeneous soil have a poorer performance from the thermal transfer point of view. The characterization process of soil structure and properties allows to take the appropriate decision …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 8, Issue 2, 2022 · pp. 26–35 Read article
-
Comparative Static Analysis of Flat Slab Without Periphery of Beam Provided Infill and Shear Wall Panel at Different Storey
Abstract: In this paper, increased awareness for the need to evaluate and improve the seismic performance of flat slab without periphery of beam. There are several numbers of factors affecting the behavior of building. Stiffness irregularity in vertical direction is one of them, and as a result of which soft storey is formed. In the this paper work a parametric study is performed on flat slab without periphery beam with infill …
Published in International Journal of Structural Engineering and Analysis · Vol. 3, Issue 1, 2017 · pp. 37–44 Read article
-
Comparative statis analysis of Regular and irregular building
Abstract: ABSTRACT: In this paper is increased safety and evaluate the seismic performance of Irregular and Regular building. There are several numbers of factors affecting the behavior of building. In the this paper work a parametric study is performed on Irregular and Regular plan of building with infill wall 230 mm thick and internal wall 115 mm thick provide at G+15 storey with Regular and Irregular building in seismic zone IV …
Published in International Journal of Structural Engineering and Analysis · Vol. 3, Issue 2, 2017 · pp. 29–34 Read article
-
Seismic Performance Of RC Elevated Liquid Storage Tank Supported On Partial Shaft Type And Full Shaft Type Staging.
Abstract: Elevated water tanks are mostly used in public water distribution system. These structures are most vulnerable under earthquake excitation due to large lumped mass concentrated at the top of slender supporting structure. In this dissertation, a comparative study is made on seismic performance of elevated intze shape water tank supported partial shaft type staging and full shaft type staging of 2,50,000 litre capacity. The analysis s carried out in accordance …
Published in International Journal of Structural Engineering and Analysis · Vol. 6, Issue 1, 2020 · pp. 40–51 Read article
-
Intelligent Monitoring and Water Irrigation System with IoT
Abstract: In this research paper, we present a Smart Irrigation System using an ESP32 microcontroller, with various sensors and Arduino IDE using IoT. Sensors like the DTH11 sensor temperature-humidity and Soil Moisture sensor use the smart Irrigation system to measure the soil’s reading and sends the alert to the Wi-Fi-based cloud application [Blynk Application] followed by watering the plants. The idea behind this is easy, cost-efficient, and simple to implement which …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 8, Issue 2, 2022 · pp. 20–28 Read article
-
2-D ELECTRICAL RESISTIVITY TECHNIQUE FOR GROUNDWATER EXPLORATION IN IKERE – EKITI, NIGERIA
Abstract: The electrical resistivity techniques become one of the most widely used geophysical survey methods. Electrical resistivity method has been applied to various fields like groundwater and subsurface resource exploration. In the past, electrical resistivity was used in engineering, environmental and archaeological purposes. Its reliability depends on the expert interpretation skills of geophysicist. Applicable technique in groundwater exploration like electrical resistivity method which complement with existing conventional method will produce comprehensive …
Published in International Journal of Energetic Materials · Vol. 5, Issue 1, 2019 · pp. 1–8 Read article
-
Chemical Risks of Explosive Weapons and Their Long-Term Effects
Abstract: Explosive weapons, such as bombs, rockets, and landmines, are known to cause destruction and fatalities in conflict zones around the world. However, the use of such weapons also produces hazardous chemicals that can have long-lasting environmental and health impacts on people and ecosystems. These chemicals can be released into the air, soil, and water, contaminating the surrounding environment and potentially exposing civilians to toxic substances. The chemicals produced by explosive …
Published in International Journal of Energetic Materials · Vol. 8, Issue 2, 2022 · pp. 31–35 Read article
-
Nanotechnology in Precision Farming: The Role of Research
Abstract: Precision agriculture is revolutionizing the agricultural sector. Crop production has changed as a result of its use of technology and data, becoming more economical, ecologically friendly, and efficient. With a projected population of 9.7 billion on Earth by 2050, there will be a constant demand for food. To meet this demand sustainably and guarantee food security for future generations, precision agriculture is essential. Precision farming's incorporation of nanoparticles has the …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 2, 2023 · pp. 22–28 Read article
-
Autonomous Multi-Agent Sensor Network for Distributed Environmental Instrumentation
Abstract: Environmental monitoring requires intelligent, scalable, and autonomous instrumentation systems capable of continuously sensing, processing, and communicating heterogeneous data under dynamic conditions. This study proposes an Autonomous Multi-Agent Sensor Network for Distributed Environmental Instrumentation, integrating distributed sensor nodes, edge computing, multi-agent collaboration, adaptive data fusion, and intelligent decision-making to achieve reliable real-time monitoring of environmental parameters. Each sensor agent autonomously performs local sensing, anomaly detection, energy-aware communication, and cooperative information exchange …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 12, Issue 2, 2026 Read article
-
Microbial and Enzymatic Degradation of Polyethylene: Molecular Mechanisms, Omics Approaches, and Biotechnological Applications
Abstract: Abstract: Polyethylene (PE), a commonly used synthetic polymer, is highly resistant to natural breakdown, leading to serious environmental and ecological issues such as soil and marine pollution, the formation of microplastics, and risks to wildlife and human health. Recent efforts have focused on using microbial and enzymatic processes to handle polyethylene waste. Microorganisms such as bacteria (Pseudomonas, Bacillus), fungi (Aspergillus, Penicillium), and algae produce enzymes like laccases, peroxidases, oxygenases, and …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 12, Issue 2, 2026 Read article
-
Survey on Clubroot Disease (Plasmodiophora brassicae) of Mustard in Jamalpur District of Bangladesh
Abstract: The survey was conducted to determine the present status of Clubroot disease (Plasmodiophora brassicae) of Mustard at Jamalpur district of Bangladesh during the Rabi season of 2024–2025. A total of 25 farmers’ fields in 2 (two) Upazilas viz., Islampur and Dewanganj in Jamalpur district of Bangladesh were surveyed for Clubroot disease occurrences of Mustard. The varieties cultivated during survey were BARI Sharisha-14, BARI Sharisha-17, Tori-7, BINA Sarisha-9 and local cultivars …
Published in International Journal of Plant Biotechnology · Vol. 12, Issue 2, 2026 · pp. 32–39 Read article
-
Green and Nanotechnology Approaches for the Determination of Tungsten (VI): A Modern Analytical Perspective
Abstract: The determination of tungsten (VI) has gained increasing importance due to its extensive industrial applications and growing environmental relevance. Tungsten is widely used in alloys, catalysts, electronics, and energy systems, leading to its release into environmental matrices such as water, soil, and biological systems. Accurate monitoring of tungsten at trace and ultra-trace levels is therefore essential for environmental assessment and industrial quality control. Conventional analytical techniques, including inductively coupled plasma …
Published in International Journal of Analytical and Applied Chemistry · Vol. 12, Issue 1, 2026 · pp. 26–35 Read article
-
Development of Superabsorbent Polymers from Natural Sources
Abstract: Superabsorbent polymers (SAPs) are special materials that can absorb and hold a very large amount of water compared to their own weight. They are commonly used in products such as baby diapers, sanitary items, agriculture, and wastewater treatment. Most of the SAPs used today are made from petroleum-based chemicals. These materials do not easily break down in nature and may cause environmental pollution. Therefore, it is important to develop safer …
Published in International Journal of Metallurgy and Alloys · Vol. 12, Issue 1, 2026 · pp. 25–34 Read article
-
Crude Oil Degradation on the Influence of Palm oil-Fermented Wastewater Used as Biostimulant
Abstract: *Author for CorrespondenceUkpaka Chukwuemeka Peter E-mail: [email protected] The total petroleum hydrocarbon (TPH) degradation was monitored in a batch reactor with the addition of biostimulants like palm oil processed wastewater (POPWW) acting as nutrients, to effectively enhance high efficiency in contaminants remediation in clay soil. The kinetic components were evaluated in terms of specific rates of petroleum hydrocarbon degradation, maximum specific rate of total petroleum hydrocarbon degradation as well as the …
Published in International Journal of Chemical Separation Technology · Vol. 12, Issue 1, 2026 · pp. 47–60 Read article
-
Mountain-Born Architecture: The Lung Vai School in Vietnam
Abstract: Lung Vai School, located in the mountainous Minh Tân region of northern Vietnam, represents a context-sensitive architectural response shaped by geography, climate, and the cultural traditions of the Hmong community. Designed by 1+1>2 Architects and completed in 2020, the school demonstrates how educational infrastructure in remote regions can be realized through vernacular intelligence, material ecology, and participatory construction processes. Rather than relying on imported typologies or industrialized systems, the project …
Published in International Journal of Town Planning and Management · Vol. 12, Issue 1, 2026 · pp. 27–35 Read article
-
A review on Biochar and its Nanocomposites for Removal of Toxics from Wastewater
Abstract: Biochar is a carbon-rich material formed by the thermochemical conversion of biomass under oxygen-limited circumstances, providing a long-term solution for waste valorisation and environmental management. Because of its high stability, surface functional groups, and porous structure, biochar has been used extensively in pollutant adsorption, carbon sequestration, and soil amendment. Recent developments have produced biochar nanocomposites, in which the physicochemical properties of biochar are improved by engineering or combining it with …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 1, 2026 · pp. 15–29 Read article
-
A Smart App-Based Irrigation System for Sustainable Agriculture
Abstract: Abstract : Agriculture is significant factor in meeting up with the needs of the future, as well as the world's population that is likely to increase significantly in the coming years but agriculture is highly dependent on the availability of water. In many places erratic rains and scarce water resources have meant traditional irrigation methods have been inefficient and unsustainable. Farmers often use fixed time or judgment in irrigating the …
Published in International Journal of Water Resources Engineering · Vol. 12, Issue 1, 2026 · pp. 41–49 Read article