Search
1013 articles for “characterization”
-
Performance Analysis of Effect of Underlap with Fixed Gate Length: GaN-based Double Gate MOSFET
Abstract: The effect of gate length 8 nm with underlap of double gate MOSFET has been designed for VLSI Technology. The evaluation process was followed by NEGF (non-equilibrium Green’s function) formalism using SILVACO ATLAS followed to ITRS–2013. The investigations on the threshold voltage, Sub threshold Slope, ION, IOFF, ION/IOFF, DIBL and switching characteristics of the electric field have been done with the simulation results. In the simulation, adopting symmetrical distances from …
Published in International Journal of Applied Nanotechnology · Vol. 6, Issue 2, 2020 · pp. 19–25 Read article
-
Physico-mechanical, and Biodegradation Properties of Polyethylene/Food Polysaccharide Blends
Abstract: Hydrophilic/polar and hydrophobic/non-polar materials do not blend well, which causes issues in the production of biodegradable plastic. Plasticizer (glycerol) was one of the components added to the mixture to increase compatibility between the two materials; this also made the film less brittle. The purpose of this study is to look at how different food polysaccharide contents affect the physico-mechanical, and biodegradation characteristics of novel polymeric-based bio-composite films made from low-density …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 1, 2023 · pp. 1–13 Read article
-
Wettability of carbon fibers with resin matrices from dynamic contact angle measurements
Abstract: Wettability is the property that quantifies the propensity of a solid surface (carbon fiber) to be covered by a liquid (resin). For a wettable solid, the solid-liquid contact is favoured and as a result the liquid spreads on such surface of the solid. Spreading of the liquid on the solid surface is primarily driven by the adhesive forces between the liquid and the solid, while the inter molecular cohesive forces …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 Read article
-
Mechanical and Microstructure Properties of Al and SiC Reinforced Aluminum-Based Metal Matrix Composite
Abstract: It is becoming increasingly difficult to design new technical materials that are resistant to wear damage and corrosion degradation in severe service circumstances. Unfortunately, even with crucial passive metals, like Al alloys, there is often a compromise between wear and corrosion resistance. Because of the unfavorable galvanic connection between the precipitates and the matrix, precipitates not only harden the material but also accelerate corrosion. This research established that a supersaturated …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 1, 2025 · pp. 26–43 Read article
-
Some Thermal Properties of Banana (Musa acuminata) Peels Bonded Waterlily (Nymphaea lotus Linn.) Briquettes
Abstract: The purpose of the study was to determine how the amount of binder affected the ignition time and rate of burning of fuel briquettes made from a blend of banana (Musa acuminata) and waterlily (Nymphaea lotus Linn.) peels at varying binder ratios (0, 20, 40, 60, and 80% by weight of each feedstock). Before the briquettes were expelled for additional research, the homogenous feedstock was compressed by a hydraulic press …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 11, Issue 1, 2025 Read article
-
Experimental Study on the Surface Properties of Coconut Husk Fiber and Banana Fiber Treated with Sodium Lauryl Sulfate
Abstract: The focus of modern research is on using natural, biodegradable, and renewable materials in place of synthetic ones. Composites made from natural fibers are undergoing extensive research because of their unusual characteristics and eco-friendliness. Natural fibers have the benefits of being readily available, simple to handle, and biodegradable. One of the best ways to improve the mechanical characteristics of polymer is to reinforce it with natural fibers. With hybrid composites, …
Published in International Journal of Composite and Constituent Materials · Vol. 10, Issue 2, 2024 · pp. 13–24 Read article
-
Use of Micro- and Nanobubble in Waste Water Treatment Technology – Review
Abstract: ABSTRACT The environmental nanotechnology is a technical discipline which research features of natural and man-made nanomaterials, applications, techniques for their characterization, integration processes and transformation into ecosystems. Microbubbles have the capability to change the normal characteristic of water. The microbubbles (MBs) have diameter more than 100 μm, the micro-nanobubbles (MNBs) have diameter between 1 to 100 μm and the nanobubbles (NBs) have diameter less than 1 μm within the fluid …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 4, Issue 1, 2018 · pp. 5–10 Read article
-
The Power of Chemical Modeling: Unveiling Molecular Behavior
Abstract: Chemical modeling has developed as a strong tool for deciphering the complicated behavior of atoms at both the molecular and atomic scales. Researchers can simulate and comprehend the complex dynamics and properties of chemical systems by combining ideas from physics, chemistry, and computer science. The importance of chemical modeling in studying molecular behavior and demonstrates its transformative ability in a variety of scientific disciplines. Chemical modeling, using advanced computational approaches, …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 1, 2023 · pp. 9–13 Read article
-
Physico-Mechanical Performance of Waste Plant Fiber Reinforced Thermoplastic Composites for Automotive Applications
Abstract: To maximize the interfacial bond strength, it is necessary to investigate the direct relationship between the degree of fiber-matrix adhesion and the mechanical and fracture behavior of composites. In this work, the strength of the interfacial bond between polypropylene (PP) and waste plant fiber (Dharose plant fiber, DF) that have been subjected to ultraviolet radiation (UV) was established. By using hot press molding, unidirectional composites of PP with dharose plant …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 1, 2023 · pp. 14–24 Read article
-
Detection of Phishing Sites Using Machine Learning
Abstract: The content of phishing websites and online-based material provides a variety of indicators. One of the criminal attacks that are successful in the online world is phishing sites that direct users to a phishing website that looks and acts like a legitimate website in order to steal the victim's personal and sensitive information. The Extreme Learning Machine-based version that was suggested was excellent at spotting phishing websites. Internet page types …
Published in International Journal of Software Computing and Testing · Vol. 9, Issue 1, 2023 · pp. 33–39 Read article
-
HYBRID PV-TEG SYSTEM TO IMPROVE PERFORMANCE
Abstract: The use of Peltier cells as a system to use residual hot generated by photovoltaic panels while working is seen as a solution to the loss of performance in them because of the hot previously mentioned. At the same time it favors the production of electric energy because of the Seebeck effect. To determine the viability of a hybrid system photovoltaic panel and Peltier cell assembly it is essential to …
Published in International Journal of Microwave Engineering and Technology · Vol. 7, Issue 2, 2021 · pp. 26–42 Read article
-
FESEM and HRTEM Analysis of ACNT-MoS2 Nanohybrids
Abstract: Material characterization is very important aspect of material science for characterizing the material. Specially field emission scanning electron microscope (FESEM) and high resolution transmission electron microscope (HRTEM) are very useful for characterize the nano-structured material. Here amorphous carbon nanotube – MoS2 nanohybrids were characterized by using FESEM and HRTEM method. Amorphous carbon nanotube-MoS2 nanohybrids were prepared through hydrothermal method using amorphous carbon nanotube, hexaammonium heptamolybdate tetrahydrate and thiourea as main …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 5, Issue 2, 2019 · pp. 20–26 Read article
-
Experimental investigation on single cylinder 4-stroke diesel engine using nanofluids as a coolant to compact the system
Abstract: Recent power sectors associated with an internal combustion engine had a crucial challenge to reduce the size and weight of the thermal management system of internal combustion engines. This work aims to reduce the size and weight of the internal combustion engine cooling system by utilizing particular types of working medium as a coolant in place of traditional ones. In this study, the effects of water base CuO nano-coolant on …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 7, Issue 1, 2021 · pp. 12–25 Read article
-
Photo-Catalytic Degradation of Dyes Using Graphene Oxide–Dithizone Composite
Abstract: Graphene oxide–dithizone (GO–DTZ) composite was successfully synthesized through the copolymerization of graphene oxide and dithizone to develop an efficient photocatalytic material for wastewater treatment. The dithizone polymer was prepared using a 1:2 molar ratio, while graphene oxide was synthesized via the modified Hummers’ method to obtain highly oxidized graphene sheets with abundant oxygen-containing functional groups. The GO–DTZ nanocomposite was fabricated by ultrasonically dispersing graphene oxide with the synthesized dithizone polymer …
Published in International Journal of Analytical and Applied Chemistry · Vol. 12, Issue 2, 2026 · pp. 46–53 Read article
-
High Strength Concrete (M40) Using Micro Silica and Steel Fiber
Abstract: Abstract: This experimental study examines the combined effects of micro silica (silica fume, SF) as a partial cement replacement and hooked-end steel fibers on the mechanical properties of M40 grade concrete. Concrete mixes were designed as per IS:10262 with a target characteristic compressive strength of 40 MPa. Silica fume was incorporated at 0%, 5%, 10%, and 12% by weight of cement, while steel fibers (aspect ratio ~50) were added at …
Published in International Journal of Construction Engineering and Planning · Vol. 12, Issue 1, 2026 · pp. 53–57 Read article
-
A look at friction stir processing for making better surface properties
Abstract: Abstract Friction stir processing is a surface properties modification method consequential from friction stir welding. The process uses a non-consumable tool made up of tool steel material. The tool pin and shoulder plunged in the surface of the base material plates and it mover along the predetermined path. The frictional heat stimulates the plastic deformation during the process & enhances the dynamic recrystallization. The process represents an advanced approach that …
Published in International Journal of Manufacturing and Materials Processing · Vol. 11, Issue 2, 2025 · pp. 41–47 Read article
-
Mechanical, Thermal, and Electrical Properties of Poly(ether-ester)-Based Thermoplastic Elastomer Composites Filled with ZnO Nanoparticles
Abstract: A highly helpful technique to create novel polymeric materials with ordered and customized features is blending two or more immiscible polymers. The outstanding balance between processability and physical characteristics of thermoplastic polyester elastomers, particularly when using hydrogenated styrene–butadiene copolymer, makes them appealing materials for a variety of applications, including the automotive industry. New opportunities for tailored flexible composites with improved mechanical and chemical properties are made possible by reinforced polymers …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 10, Issue 2, 2024 · pp. 33–42 Read article
-
A Review on Nanotechnology for Catalysis and Solar Energy Conversion
Abstract: Abstract This roadmap on Nanotechnology for Catalysis and Solar Energy Conversion focuses on the application of nanotechnology in addressing the current challenges of energy conversion: ‘high efficiency, stability, safety, and the potential for low-cost/scalable manufacturing. Solar-to-fuel conversion involves using nanotechnology to improve the efficiency and effectiveness of converting solar energy into chemical fuels. Solar Water Splitting Nanotechnology is applied to enhance the process of splitting water into hydrogen and oxygen …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 10, Issue 1, 2024 · pp. 1–9 Read article
-
Fordism to Post Fordism in the UK
Abstract: This article presents an overview of Fordism and Post Fordism in the UK and looks at the transition from one period to another. It looks at the roots of Fordism in the mass production techniques used by the Ford motor company in America and its application as a label to describe the political, economic and social characteristics of an era. It is associated with the Keynesian welfare state during the …
Published in International Journal of Housing and Human Settlement Planning · Vol. 5, Issue 1, 2019 · pp. 23–27 Read article
-
Studies on the External Genitalia of Some Species of Moths of Family Geometridae (Lepidoptera) of Morni Hills, Haryana
Abstract: The present work is a comprehensive study that aims to investigate the external genitalia of male geometrid moths collected from Morni Hills, Haryana. The study is divided into several sections, including an introduction, a review of literature, material and methods, observations, a conclusion, and references. The introduction begins by providing an overview of the family Geometridae and its characteristics. The name of the family is derived from the ancient Greek …
Published in International Journal of Animal Biotechnology and Applications · Vol. 9, Issue 1, 2023 · pp. 50–62 Read article