Search
337 articles for “hardness”
-
Metallurgical and Machinability Characteristics of Wrought and Selective Laser Melted Ti-6Al-4V
Abstract: This examination work shows a machinability ponder between created review titanium and specific laser softened (SLM) titanium Ti-6Al-4V in a face turning operation, machined at cutting paces in the vicinity of 60 and 180 m/min. Machinability attributes, for example, device wear, cutting powers, and machined surface quality were examined. Covering delamination, attachment, scraped spot, steady loss, and chipping wear instruments were overwhelming amid machining of SLM Ti-6Al-4V. Greatest flank wear …
Published in International Journal of Metallurgy and Alloys · Vol. 3, Issue 1, 2017 · pp. 9–12 Read article
-
The Metallurgical Properties of Beryllium
Abstract: Beryllium is a toxic bivalent element, steel gray, strong, light-weight, primarily used as hardening agent in alloys. Beryllium has one of the highest melting points of the light metals. It has excellent thermal conductivity, is nonmagnetic, it resists attack by concentrated nitric acid and at standard temperature and pressures beryllium resist oxidation when expose to air. Keywords: Beryllium, metallurgical properties, applications, uses
Published in International Journal of Metallurgy and Alloys · Vol. 3, Issue 2, 2017 · pp. 1–3 Read article
-
Study of the effect of Silicon oxide nanoparticles in the copper alloy
Abstract: The main objective of this paper is to study the effect of the Silicon oxide nano particles in the copper alloy which is manufactured by using the stir casting process and samples are prepared as per the ASTM standards. These specimens are tested under the mechanical tests. Due to blending of the nanoparticles the properties of copper alloy will be enhanced. so uniform ASTM samples with varying composition of nano …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 24–31 Read article
-
Ability of Metallic Materials to Resist Surface Damage Induced by High-temperature Action of Air or other Gaseous Mediums
Abstract: The features of the oxide layer scale that forms on the metal's surface and limits gas penetration into the metal, limiting the growth of gaseous corrosion, influence a metal's or alloy's oxidation resistance in an oxidising atmosphere. The rise in weight of sample being tested (due to oxygen uptake by the metal) or even the weight loss after removing the scale from the sample's surface, related to a unit surface …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 1, 2022 · pp. 16–21 Read article
-
Nano Finishing of HDPE/Al2O3/HAp Ternary Composite Based Acetabular Socket using Polymer Rheological Abrasive Semisolid Medium
Abstract: Acetabular socket is one of the important parts of the hip joint. The surface roughness in the acetabular socket decides the friction and wear during the motion of the human. Low surface roughness in the acetabular socket gives free motion of hip joint as well as high joint life. Nano surface roughness on the inner surface of acetabular socket also reduce the particles generation during the dynamic motion between hip …
Published in International journal of Nanobiotechnology · Vol. 2, Issue 2, 2016 · pp. 5–8 Read article
-
Nanotechnology based solutions for control of Agricultural pests
Abstract: Application of nanotechnology for the control of agricultural pests is an emerging field of research. It is driven by the realization that they are more effective and are equally competent in terms of their biocidal potential and that too at significantly low concentrations as compared to conventional pesticides. Unscrupulous application of larger volumes of chemical pesticides has many harmful effects including, acute toxicity to animals and human beings (up on …
Published in International journal of Nanobiotechnology · Vol. 3, Issue 2, 2017 · pp. 7–13 Read article
-
Nanotechnology Based Drug Delivery System in Tuberculosis: Review
Abstract: From near the beginning centuries to present life Tuberculosis remains the world-wide disease without any limitations. In the other hand, in some cases in the infected individuals the disease remains in a dormant state. In this stage the treatment is hard as the lipid mycobacterial wall is thick & the delivery of drug inside the bacterial cell is difficult. Due to this new face of TB it becomes the major …
Published in International journal of Nanobiotechnology · Vol. 3, Issue 2, 2017 · pp. 14–24 Read article
-
A Review on Hypothetical Evaluation of Nanosensors
Abstract: Nanosensors are chemical or mechanical sensors that can be utilized to distinguish the presence of synthetic species and nanoparticles, or screen physical elements, for example, temperature, on the nanoscale. They likewise discover use in therapeutic analytic applications Nanosensors are increasing expanding consideration because of the need to identify and measure synthetic and physical properties in hard to reach natural and mechanical frameworks that are in the nano-scale area. These hypothetical …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 1, Issue 2, 2015 · pp. 08–11 Read article
-
Study of Mechanical Properties of Aluminum Nanocomposites using Auto Ignition Technique
Abstract: Al2O3 - high ZrO2 nanocomposite was synthesized by auto-ignition technique using metal nitrate and citric acid with a ratio of citrate: nitrate equal to 1:1.5. The precursor zirconium oxynitrite was derived from precipitation of zirconium oxycloride followed by dissolution of gel in nitric acid. The thermal decomposition behaviour of the gel was studied in order to study the decomposition behaviour and to determine the crystallization temperature. The effect of calcination …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 2, 2017 · pp. 36–42 Read article
-
Study on the Properties and Applications of Thermoplastic
Abstract: Hot-applied thermoplastic is prepared for road deposition in a melting apparatus where the granular or block material is introduced and heated until it liquefies at temperatures exceeding 400F. When applied on asphaltic concrete, thermoplastic material develops a thermal bond via heat- fusion. A thermoplastic is a material, usually a plastic polymer, which becomes soft when heated and hard when cooled. Thermoplastic materials can be cooled and heated several times without …
Published in International Journal of Composite and Constituent Materials · Vol. 3, Issue 2, 2017 · pp. 16–21 Read article
-
Study on Preparation and Properties of Agro-waste Particleboard at Various Press Temperatures
Abstract: This study concerns the influence of temperature on changes in physical and mechanical properties of particleboard fabricated from betel nut (Areca catechu L) fiber (Agro-waste) and urea-formaldehyde adhesive during hot-pressing with multiple press temperatures (120, 130, 140, 150 and 160°C) at 15 minutes. The physical and mechanical properties of particleboards were determined by British Standard (BS-1811) and Indian Standard (IS-3087) Methods. For some physical and mechanical properties, it appears that …
Published in International Journal of Composite and Constituent Materials · Vol. 7, Issue 1, 2021 · pp. 40–47 Read article
-
Experimental Analysis on the Characteristics of Gas Turbine Blade Materials
Abstract: Gas turbine technology is gaining importance and has become viable option in most of the applications in view of depleting fossil fuels. Material research has widened the scope and life of gas turbines with improved performance. Present work experimentally studies about the characteristics of different materials that can be used in gas turbines and in particular, turbine/compressor blades. Nickel, Titanium and steel alloys of different metal compositions are selected. Hardness …
Published in International Journal of Composite Materials and Matrices · Vol. 2, Issue 2, 2016 · pp. 19–23 Read article
-
Sliding wear behavior of plasma sprayed NiCrAlY-WC based composite coatings on AA5083 alloy
Abstract: WC based coatings was deposited by thermal spray process have been extensively used in industrial application to counter abrasive type of wear. In this study, for the first time NiCrAlY-WC based composite coatings were deposited on AA5083 substrate by plasma sprayed coating technique. The composite coatings were characterized by optical microscopy (OM), scanning electron microscopy (SEM) and microhardness. Sliding wear behavior of coated and uncoated samples was carried out on …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 21–26 Read article
-
Mechanical Behavior and Model Fitness of the Natural Fiber Composite: A Study on Orange Peel and Charcoal Composite
Abstract: In this paper, orange peel with charcoal in addition with epoxy resin composite is tested for the behavior of mechanical properties. The results depicted that the best hardness, thickness, tractable flexural are getting for the material organized with the 20 % of weight sustained orange strip epoxy composite. The obtained results were also tested for regression analysis for validate the experimental data for assessment of model fitness. Keywords: natural composite …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 33–42 Read article
-
Thermo-Mechanical Properties of Banana and Jute Fiber Reinforced Polypropylene Composites
Abstract: Abstract Present research aims at finding out better fiber reinforcement for low cost and eco-friendly polymer matrix composite. Polypropylene was chosen as a matrix, while jute and banana fiber were chosen as reinforcement. Composites were prepared by using a hot press machine. Fiber loading was varied at 0, 4 and 8 volume%. Both raw jute and banana fiber was chemically treated with 5 wt% sodium carbonate and composites were also …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 37–47 Read article
-
Implications of ceramic – metal matrix compose
Abstract: AbstractThis article summarizes some formatives over WC-metal matrix composite surfacing on hard as well soft alloys. Composite surface has coated by laser, plasma and electroplating. WC-Ni composite has prepared by plasma transferred arc welding on steel surface. Thickness achieved from several mm on small parts to thin deposits on large surfaces. Cu-substrate accorded WC-Ni laser cladded deposition. Laser deposition of WC-Ni-NiCr on stainless has increased wear and erosion under flowing …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 31–37 Read article
-
Compatibilizing Effect of Modified Polypropylene on the Properties of Polypropylene/Organically Modified Layered Silicate Nanocomposites
Abstract: In the present research paper, a series of polypropylene (PP) nanocomposites containing 3, 5, and 7 wt% of an organically modified layered silicate (OM) were prepared via direct melt mixing in the presence of maleic anhydride grafted polypropylene (indicated as PP-g-MA, PPMA), and hexamethylenediamine-modified maleic anhydride grafted polypropylene (marked as PP-g-HMDA, PPHMDA) as compatibilizing agent at concentration of 10 wt%. Subsequently the influences of the compatibilizer on the morphological, mechanical, …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 8–19 Read article
-
Plastics Compressive Strength Testing
Abstract: Compression test is a mechanical test that determines how much compressive force a material to resist before cracking. A gradually applied load compresses the test item, which is commonly in the shape of a square, pyramid, or cylinder, between the platens of a compression-testing machine. Many ductile metals, such as mild steel, have extremely high compression strength, yet measuring them is challenging. Whenever a load is given to a ductile …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 2, 2021 · pp. 46–50 Read article
-
The Potential Application of Walnut Shells as Biofillers for Natural Rubber Composites
Abstract: It was evaluated whether walnut shells should be used as filler in composites made of natural rubber. Samples of walnut shells were ground to fine powders, sieved through a 75 μm mesh, and were used in compounding natural rubber using varying filler loading of unfilled, 20 hpr, 30 hpr, 40 hpr, and 50 hpr. The physicochemical analysis results of the walnut shell powder were 5.30, 10.10%, 2.50%, 43.70%, 49.70 mg/g, …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 2, 2022 · pp. 30–34 Read article
-
Effect of Coupling Agent on Organoclay Dispersion in Polyethylene/Organoclay Nanocomposites for Packaging Industry
Abstract: Low-density polyethylene (LDPE) is one of the most widely used polymers in various fields, but due to the hydrophobic nature of LDPE, it is hard to prepare an LDPE/clay nanocomposite. In this article, an LDPE/organoclay nanocomposite, which can be used in the packaging industry, was prepared by melt-blending organoclay with a polymer matrix (LDPE) and compatibilizer, low molecular weight oxidized polyethylene. The influences of organoclay, and compatibilizer during melt mixing …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 1, 2023 · pp. 1–11 Read article