Search
1120 articles for “properties”
-
The Existence of Two States in Liquid Water and Its Impact on Biological and Nanoscopic Systems Around Us
Abstract: This work reviews several properties of liquid water, including the dielectric constant and the proton-spin lattice relaxation, and draws attention to a bilinear behavior defining a crossover in the temperature range 50 ± 10°C between two possible states in liquid water. The existence of these two states in liquid water plays an important role in nano-metric and biological systems. For example, the optical properties of metallic (gold and silver) nanoparticles …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 1, 2017 · pp. 16–21 Read article
-
Amorphous Carbon Nanotube-MoS2 Nanohybrids : A New Future Material in the Application of Battery, Supercapacitor and Field-emission Display Devices
Abstract: The discovery of graphene make the researcher interested towards the other two-dimensional material which has quite similar properties like graphene. Among them, MoS2 nanosheets has extraordinary optoelectronic and physical properties. It has several applications in developing battery, sensor, optoelectronic device etc. On the other hand, amorphous carbon nanotube can be synthesized by using a low temperature chemical process. Due to the easy processing of amorphous carbon nanotube (ACNT), good optoelectronic …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 5, Issue 2, 2019 · pp. 36–45 Read article
-
Fabrication, Microstructure and Mechanical Behavior of Aluminum Alloy (LM-13) Reinforced with Nano-ZrO2 Particulate Chilled Nano-Metal Matrix Composites (CNMMCs)
Abstract: In the present research, aluminum alloy (LM13) Metal Matrix Composite (MMC) is prepared by stir casting technique and is reinforced with ZrO2 particulates in the weight percent ranging from 3 wt.% to 12 wt.% in the steps of 3 wt.%. The reinforcement i.e., ZrO2 particle size added varies between 100–200 nm. The resulting CNMMCs are solidified under the influence of copper chill of 25 mm thickness to study the effect …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 6, Issue 2, 2020 · pp. 17–30 Read article
-
Magnetic Field Guided Diluted Magnetic Semiconductor, ZnxFe2-xO3 Nanoparticles for Biomedical and Biosensing Application
Abstract: The magnetic field guided nanoparticles are studied in the viewpoint of diluted magnetic semiconductor. Different structures and properties associated with Zn doped αFe2O3 nanostructures are presented in theoretical formulations. In addition, scientific methods of synthesizing particularly Solvothermal and biological methods of synthesizing Zn0.6Fe1.6O3 nanoparticles are discussed. More emphasis is given to the essence of nanotechnology from non-organic to organic matter namely nanoparticles of Zn0.6Fe1.6O3 to DNA. For in vivo or …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 8, Issue 1, 2022 · pp. 1–18 Read article
-
Advancements of Carbon Quantum Dot and their use in Biomedical
Abstract: Carbon quantum dots (CQDs) have gained significant attention in the biomedical field due to their unique physicochemical properties and potential biomedical applications. In this review, we provide a comprehensive overview of recent advancements in CQD synthesis, functionalization, and their use in biomedical applications. Firstly, we discuss various synthetic methods used to produce CQDs, including microwave-assisted synthesis, hydrothermal synthesis, and electrochemical synthesis. Next, we delve into the functionalization of CQDs, which …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 8, Issue 2, 2022 · pp. 28–33 Read article
-
Comparative Analysis of Characterization Techniques for Nanomaterial: Strengths and Limitation
Abstract: Nanomaterials have become extremely popular in numerous fields because of their exceptional properties and potential applications. However, characterizing these materials can be challenging due to their minute size and substantial surface area. Over the years, various characterization techniques have been developed to understand the physical, chemical, and structural properties of nanomaterials. In this review, we compare and analyze the strengths and limitations of commonly used characterization techniques for nanomaterials. Several …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 8, Issue 2, 2022 · pp. 34–41 Read article
-
An Investigation of Physico-mechanical Characterizations of Recycled Cellulose Fiber and Glass Fiber-polypropylene Hybrid Composite
Abstract: In the field of marine engineering design, polymeric composites reinforced with natural fibers are extensively used. The results of this study demonstrate that these properties can be enhanced by adding glass fiber (GF) to recycled cellulose fiber (rCF) plastic composites. The performance of rCF and rCF/GF hybrid polypropylene (PP) composites is being studied in the current experimental effort. On the tensile behavior and impact strength of composites containing 30 wt% …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 1, 2023 · pp. 1–10 Read article
-
A Review on Recent Applications and Future Prospectus of Hybrid Composites in Various Engineering Applications
Abstract: Hybrid composite materials have far reaching engineering application where strength to weight proportion, minimal cost and simplicity of creation are essential. Hybrid composites deliver combination of properties such as compressive strength, impact strength and tensile modulus which cannot be appreciated in composite materials. In modern times, hybrid composites have been recognized as highly efficient, high performance structural materials and their use is increasing speedily. Hybrid composites are generally used when …
Published in International Journal of Composite and Constituent Materials · Vol. 3, Issue 2, 2017 · pp. 22–24 Read article
-
Tribological Behavior of Chilled Aluminum Alloy (LM-13) Reinforced with Titanium Carbide (TiC) Metal Matrix Composites for Automobile Applications.
Abstract: In the present research, aluminum alloy (LM13) Metal Matrix Composite (MMC) is prepared by stir casting technique and is reinforced with titanium carbide (TiC) particulates in the weight percent ranging from 3 wt.% to 15 wt.% in the steps of 3 wt.%. The dispersoid i.e. TiC particle size added varies between 100–200 µm. The resulting MMCs were solidified under the influence of copper chill of 25 mm thickness to study …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 2, 2020 · pp. 24–46 Read article
-
Finite Element Analysis of Composite Tube
Abstract: Abstract – In many industries, composite tubes are preferable than other materials, like, aluminum, steel, wood, iron. The durability, strength, stiffness, weather and corrosion resistance of the tubes are required properties in industries. It is fabricated in several layers depending on their functions. In this study, composite tube is modeled using ANSYS software by changing material properties and layer orientation. ANSYS can predict results before fabricating composite sample. The meshed …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 48–59 Read article
-
Failure Prediction of Composite Lamina
Abstract: Composite materials are preferable in many applications of engineering than their metallic equivalent. These materials provide desirable characteristics and required properties for specific design and testing. In orthotropic fiber composites, the fiber orientation dictates the material properties, because the properties can be built into the laminate during fabrication. In this study, a composite laminate is tested with a specific configuration whether it would fail or survive under specific load. If …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 27–36 Read article
-
Finite Element Analysis of Composite Pressure Vessel with Non-Geodesic Fiber Trajectory In view of Friction Factors on Cylinder and End Domes
Abstract: Composites are materials created by dissimilar materials with a view to improve the properties or to create materials with desired properties. Progressive Fiber Polymer Composites have developed as an essential class of industrial materials for load carrying applications with well-rounded properties for many industrial and social applications. Structures like pressure vessels, pipes and motor casings made-up of Filament Winding technology are widely used in aerospace applications. Conventionally, pressure vessels were …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 2, 2021 · pp. 9–21 Read article
-
Synthesis of Bromobutyl Rubber: Effect of Reaction Temperature and Time on Bromobutyl Rubber Microstructure
Abstract: Butyl rubber is prepared by cationic polymerization process either by solution or slurry phase by randomly copolymerizing isobutylene with small amount of isoprene (1-3 mol %). It has good air impermeability and oxidative stability and thus finds extensive use in inner tube applications. The presence of unsaturation in the form of isoprene units in butyl rubber provides a means of enhancing useful properties of this important commodity elastomer by incorporation …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 1, 2023 · pp. 30–39 Read article
-
Mechanical Behaviour of Natural Reinforced Polymer Composites with Hybrid Additives
Abstract: The implementation of natural fibres is the fast approaching ‘green’ economy based materials that are used in polymer matrix composites that are intended to replace the conventional synthetic polymer composites. Being plenteous fundamentally, natural fibres have been existed the primary form of natural resources for centuries. Considering that mechanical properties of composites are strongly influenced by the quality of the fibre/matrix interface and with eco-friendly properties like excellent energy absorption, …
Published in International Journal of Polymer Science and Engineering · Vol. 2, Issue 1, 2016 · pp. 7–12 Read article
-
Innovative Value Chain Development of Modified Starch for a Sustainable Environment: A Review
Abstract: Granular structure of starch is widely utilized in a variety of applications due to its universal abundance, relatively low cost, and ability to impart a broad range of functional properties to their products. However, most starches in their native form have limitations that make them less than ideal for the diversity of desired applications. For this reason, most of the starch utilized as a food or industrial ingredient is first …
Published in International Journal of Polymer Science and Engineering · Vol. 2, Issue 1, 2016 · pp. 20–32 Read article
-
FABRICATION AND EVALUATION OF VINYL ESTER RESIN BASED HYBRID COMPOSITES
Abstract: Jute is most widely used natural fiber in combination of various polymer because of easy availability, low environment impact, low density, low production cost, satisfactory mechanical properties and usage in wide range of applications. Mechanical properties of fibers are depending upon various factors such as fiber length, fiber orientation, fiber contact etc. In the present study, composite of Jute (J) and Glass fiber (G) have been fabricated using hand lay …
Published in International Journal of Polymer Science and Engineering · Vol. 3, Issue 1, 2017 · pp. 26–31 Read article
-
Preparation and Evaluation of Plant-Based Coir Fiber-Reinforced Polypropylene Composites
Abstract: In the present article, unidirectional coir fiber (CF) and alkali-treated CF (ACF) were incorporated in polypropylene (PP) with and without 3-aminopropyl trimethoxy silane (AS) and tetramethoxy orthosilicate (TS) to produce composites by a compression molding technique. The basic properties of PP/CF composites (e.g. tensile strength, tensile modulus, impact strength, and water absorption) have enhanced with increasing CF content. The incorporation of AS and TS after alkali pretreatment for CF composites …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 2, 2021 · pp. 34–47 Read article
-
Graphene and Carbon Nanotube-PLA Composite Feedstock Filament for Fused Deposition Modelling:Review
Abstract: 3D printing or AM has revolutionized the way of manufacturing by designing complex structure in atomized features which cannot be realized by conventional processing method. Many are adopting Additive Manufacturing over traditional method to manufacture sophisticate products from single or composite material. 3D printing has a demerit that the mechanical properties of product suffer. To address this problem, this study is conducted for development of improved and sustainable feedback material …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 1, 2020 · pp. 22–26 Read article
-
Synthesis and Characterization of Polymer-Based Organic–Inorganic Hybrid Materials viaSol–Gel Processing: A Review of Gelatin–Silica, Gelatin–Silica–Titania and HPMA-Based Systems
Abstract: Organic–inorganic hybrid materials have emerged as a versatile class of advanced materials that integrate the flexibility and functionality of organic polymers with the thermal, mechanical, and chemical stability of inorganic networks. Among the available fabrication routes, the sol–gel process has gained considerable attention because of its simplicity, low processing temperature, compositional flexibility, and ability to tailor material properties at the molecular level. The present review discusses the synthesis and characterization …
Published in International Journal of Polymer Science and Engineering · Vol. 12, Issue 2, 2026 Read article
-
Third Generation Biofuel as Alternative Fuel for Compression Ignition Engine
Abstract: In recent years, many researchers have tested compression ignition engines with the goal of creating a diesel fuel alternative. This was also published in literature. The limited supply and increased cost of petroleum products are two main reasons for the search for alternate feedstocks for biodiesel. This paper reviews the potential of alternative biodiesel feedstocks to replace petroleum diesel, specifically focusing on algae biodiesel and the process for producing biodiesel. …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 12, Issue 1, 2026 · pp. 10–15 Read article