Search
384 articles for “Thermal”
-
Study of the effect of Silicon oxide nanoparticles in the copper alloy
Abstract: The main objective of this paper is to study the effect of the Silicon oxide nano particles in the copper alloy which is manufactured by using the stir casting process and samples are prepared as per the ASTM standards. These specimens are tested under the mechanical tests. Due to blending of the nanoparticles the properties of copper alloy will be enhanced. so uniform ASTM samples with varying composition of nano …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 24–31 Read article
-
Ability of Metallic Materials to Resist Surface Damage Induced by High-temperature Action of Air or other Gaseous Mediums
Abstract: The features of the oxide layer scale that forms on the metal's surface and limits gas penetration into the metal, limiting the growth of gaseous corrosion, influence a metal's or alloy's oxidation resistance in an oxidising atmosphere. The rise in weight of sample being tested (due to oxygen uptake by the metal) or even the weight loss after removing the scale from the sample's surface, related to a unit surface …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 1, 2022 · pp. 16–21 Read article
-
Synthesis, Characterization and Biological Studies Using X-Beam Crystal Structures Which Utilizes (1) Cu Kα Data with Synchrotron Data
Abstract: The outcomes demonstrate that the complex responds as a bidentate ligand and is bound to the metal particle through the two oxygen iotas of the ligand (HL). The enactment energies, ΔE*, entropies ΔS*, enthalpies ΔH* and request of responses have been gotten from differential thermo-gravimetric (DTA) bends. In light of hindrance zone breadth estimations, the complex showed noteworthy antibacterial movement against both Staphylococcus aureus and Escherichia coli. It additionally displayed …
Published in International journal of Nanobiotechnology · Vol. 3, Issue 1, 2017 · pp. 1–5 Read article
-
Polymer Composites Based Modern Sensors for Various Applications
Abstract: Sensors tradition configured to miniaturization without shape rigidity. Sensors are fabricated by flexible organic substrate embedded with two dimensional composite inorganic particulates of nano-metric dimensions or three-dimensional electro-spin filaments. Thermal degeneration and demagnetizing effects have favored 3d composites or filamentous designs than 2d composites. These sensors have wide usage in medical electronics, aerospace engineering, textile engineering, etc. Basis of techniques are same as in cloth or paper printing. These are …
Published in International journal of Nanobiotechnology · Vol. 5, Issue 1, 2019 · pp. 32–36 Read article
-
Studies of Technical Grades from Rice Husks
Abstract: Rice husks studied in this review to subject different accessible performance in lieu of abated the dispose with no pollution. Rice husk ash in mesoporous form added in soap during preparation. Other formations appeared to process for ceramics, catalysts, adsorbing material, nano-mater and carbon added cementation products. Rice husk is by-product from rice mill subjectively reused to access another staged mission to form by-products. Firing of rice husk studied other …
Published in International journal of Nanobiotechnology · Vol. 6, Issue 2, 2020 · pp. 25–30 Read article
-
Nanotechnology Advancements for Sustainable Energy Solutions
Abstract: Nanotechnology has emerged as a promising field with immense potential for addressing the global energy challenges and achieving sustainable energy solutions. This abstract explores the advancements in nanotechnology that contribute to sustainable energy solutions. It begins by highlighting the urgent need for sustainable energy sources and the limitations of conventional energy technologies. The abstract then delves into various nanomaterials and nanostructures that have revolutionized energy conversion, storage, and utilization processes. …
Published in International journal of Nanobiotechnology · Vol. 9, Issue 1, 2023 · pp. 38–46 Read article
-
Study of Mechanical Properties of Aluminum Nanocomposites using Auto Ignition Technique
Abstract: Al2O3 - high ZrO2 nanocomposite was synthesized by auto-ignition technique using metal nitrate and citric acid with a ratio of citrate: nitrate equal to 1:1.5. The precursor zirconium oxynitrite was derived from precipitation of zirconium oxycloride followed by dissolution of gel in nitric acid. The thermal decomposition behaviour of the gel was studied in order to study the decomposition behaviour and to determine the crystallization temperature. The effect of calcination …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 2, 2017 · pp. 36–42 Read article
-
A Review: Properties and application of Graphene
Abstract: The paper focusses mainly on the different properties of graphene such as electronics, optoelectronics, mechanical, biological and optics. The thermal and electrical conductivity has been described and compared to other metals briefly. The article includes the various optoelectronic applications of graphene and its advantage over other metal oxide nanoparticles. The biological applications of graphene illustrate the area of biosensing devices for various treatments. This paper also involves the studies of …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 4, Issue 2, 2018 · pp. 6–16 Read article
-
An Advanced Nanomaterials Production in Microgravity
Abstract: Nanomaterials are matrices, containing nano sized particles. The presence of nanoparticles in the matrix leads to a sharp change in the properties of the resulting nanomaterial for the better, including mechanical strength, impact strength, electrical or thermal conductivity. Today, nanocomposites are obtained by laser decomposition of an aerosol solution of ferrocene in toluene, which results in the formation of a nanocomposite containing amorphous carbon nanoparticles and isolated iron-based nanoparticles in …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 1, 2023 · pp. 30–34 Read article
-
Performance of High Volume Fly Ash Concrete Using Local Power Plant Fly Ash
Abstract: Total production of fly ash in Indian Thermal Power plants is approximately 160 million tons annually. Except some super power plants, the quality of fly ash is said to be inferior in most of the power plants. The suitability of fly ash from local power plants for production of high volume fly ash (HVFA) concrete is not tested so far. The aim of the present investigation is to ascertain whether …
Published in International Journal of Composite and Constituent Materials · Vol. 1, Issue 1, 2015 · pp. 07–13 Read article
-
Drilling of Fibre Reinforced Plastics (FRPs) Materials: A Literature Survey
Abstract: The use of polymer composite materials has increased rapidly over the last decade and the numbers of papers for the machining of these materials has also increased. The aim of this paper is to present a literature survey on the resins, properties, the superiority of the hole produced in drilling of the fibre reinforced plastics (FRPs), different techniques used to detect the defects in composite structures that may be caused …
Published in International Journal of Composite and Constituent Materials · Vol. 1, Issue 1, 2015 · pp. 14–31 Read article
-
Study on the Properties and Applications of Thermoplastic
Abstract: Hot-applied thermoplastic is prepared for road deposition in a melting apparatus where the granular or block material is introduced and heated until it liquefies at temperatures exceeding 400F. When applied on asphaltic concrete, thermoplastic material develops a thermal bond via heat- fusion. A thermoplastic is a material, usually a plastic polymer, which becomes soft when heated and hard when cooled. Thermoplastic materials can be cooled and heated several times without …
Published in International Journal of Composite and Constituent Materials · Vol. 3, Issue 2, 2017 · pp. 16–21 Read article
-
An Introduction of Graphene: Characterization and Properties
Abstract: Graphene - Its outstanding physical features, including as high electrical conductivity, good thermal stability, and superior mechanical strength, graphene, a two-dimensional, single-layer sheet of sp 2 hybridized carbon atoms, has received considerable attention and scientific interest. Other graphene-related compounds, such as graphene oxide, reduced graphene oxide, and exfoliated graphite, have been generated on a large scale with consistency. Graphene-based materials are great candidates for inclusion into a wide range of …
Published in International Journal of Composite and Constituent Materials · Vol. 7, Issue 2, 2021 · pp. 39–46 Read article
-
Nanocomposites: The Fusion of Nanotechnology and Composite Materials
Abstract: Nanocomposites, resulting from the integration of nanotechnology and composite materials, have emerged as a cutting-edge class of materials with exceptional properties and multifunctional capabilities. This article presents a concise overview of the principles, fabrication methods, and diverseapplications of nanocomposites, highlighting their profound impact on numerous industries. By harnessing the power of nanotechnology, nanocomposites offer precise control over material structure and properties at the nanoscale. Through the incorporation of nanoscale reinforcements, …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 1, 2023 · pp. 43–50 Read article
-
An Evaluation of Cracks Repairing Techniques in Metals
Abstract: Cracks are surface that develop in a material. Dissemination energy derived from mechanical, thermal, chemical, and metallurgical effects, or a grouping of these may affect crack beginning and growth. Numerous types of cracks exist in metals and can be characterized as grinding, solidification, cooling, crater, machining tears, plating, centerline, pickling, heat treatment, fatigue, creep, stress corrosion and hydrogen cracks. Cracks can grow and lead to complete fracture of the component …
Published in International Journal of Composite Materials and Matrices · Vol. 3, Issue 1, 2017 · pp. 9–15 Read article
-
An Overview of Ceramic Matrix Composite
Abstract: Ceramic materials often exhibit a combination of useful physical and mechanical properties, including high refractoriness, but their applications are restricted due to their brittle behaviour; in an attempt to improve the strength, and particularly the toughness, of brittle ceramics particle-strengthening and fibre-reinforcement have been utilized, with limited success. The factors which affect the mechanical properties of these composite systems are discussed, and the various experimental systems that have been investigated …
Published in International Journal of Composite Materials and Matrices · Vol. 3, Issue 1, 2017 · pp. 23–26 Read article
-
Sliding wear behavior of plasma sprayed NiCrAlY-WC based composite coatings on AA5083 alloy
Abstract: WC based coatings was deposited by thermal spray process have been extensively used in industrial application to counter abrasive type of wear. In this study, for the first time NiCrAlY-WC based composite coatings were deposited on AA5083 substrate by plasma sprayed coating technique. The composite coatings were characterized by optical microscopy (OM), scanning electron microscopy (SEM) and microhardness. Sliding wear behavior of coated and uncoated samples was carried out on …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 21–26 Read article
-
Emerging Smart Materials: Recent Development in Self-healing Elastomers
Abstract: Smart materials based on olefins, diolefins, renewable materials and others reactive monomers are witnessing a rapid growth across different applications sectors such as electronics, health care, automotive, textile, building, construction, agriculture & Energy. Materials development is currently moving at high pace both in academia and in industry due to their diverse commercial potential and beneficial merit for the society. Self – healing elastomers have emerged as high potential materials among …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 1–17 Read article
-
Fabrication and characterization of Aluminum-Granite-Graphite Metal Matrix Composite
Abstract: Moving machine elements are constantly subjected to wear and tear. Machine life can be improved by using hard and wear resistant materials. Most of machine elements are made of metals or alloys. These materials alone cannot meet the requirements of design of long-life machines. Naturally occurring hard materials lack the strength to withstand the machine loads. Composite materials provide the solution to such requirements. Based on requirement, a composite material …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 20–30 Read article
-
A Review on Polybutadiene Rubber Composites
Abstract: Rubber composites are crucial materials that obtained by the combination of two or more components i.e. rubber and filler, comprising with different fundamental properties. The composites are lighter yet stronger materials in nature with intermediate characteristics of both the initial ingredients. Polybutadiene rubber (PBR) is one of the highly produced global synthetic rubber having significant industrial applications. PBR composites showed improved physical, mechanical and thermal properties, with greater strength, resistance …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 1–19 Read article