Search
927 articles for “water”
-
Hydrodynamic Modeling for contaminant spills Case study: Nile River - Upper Egypt
Abstract: Most watercourses are subjected to the threats of contaminant spills. The Nile River is the main drinking and irrigation water source for all Egyptian cities around its banks, especially in Upper Egypt. The southern reach receives considerable amounts of agricultural, industrial and municipal wastes at different sites along its mainstream. The goal of this research is to simulate contaminant spill in the studied part of the Nile River to determine …
Published in International Journal of Water Resources Engineering · Vol. 5, Issue 2, 2019 · pp. 1–16 Read article
-
DRIP IRRIGATION BY RECYCLING WASTEWATER
Abstract: Drip irrigation allows water to drip slowly to the roots of plants thus saving water, nutrients and minimizing evaporation. This study focusses on treatment of contaminated water by reducing biological oxygen demand (BOD), chemical oxygen demand (COD), eutrophication of water bodies and further using it for drip irrigation.
Published in International Journal of Water Resources Engineering · Vol. 5, Issue 2, 2019 · pp. 17–27 Read article
-
Influence of land use changes on Urban flooding - Case study of Bangalore city, India
Abstract: In past few years, Bangalore city is facing the flood disasters frequently during monsoon seasons. The land use change study is carried out for the most flood prone watersheds in the city for the years 1995, 2000, 2005, 2010, 2015 and 2018. Google earth image is used to investigate the land use changes using Google pro tool. The study has showed an increasing imperviousness in the study area of Koramangal-Chellaghatta …
Published in International Journal of Water Resources Engineering · Vol. 5, Issue 2, 2019 · pp. 50–61 Read article
-
Analysis of Groundwater Quality Karnal and Kurukshetra Districts of Haryana for Irrigation Purpose
Abstract: The present study aims to investigate ground water quality of Karnal and Kurukshetra districts ofHaryana. This study is based upon the empirical and scientific evaluation of under groundwatersample collected from the twenty wells scattered in the study area. In the analysis of collected samplecertain parameters are taken into consideration. These samples are collected during post-monsoonseason of the 2019. In total 20 samples are collected from 10 different blocks of these …
Published in International Journal of Water Resources Engineering · Vol. 7, Issue 1, 2021 · pp. 1–8 Read article
-
Treatment of Dairy Wastewater Using Constructed Wetland
Abstract: Naturally existing wetlands have been used for dumping various types of wastewaters and have been promised to dispose of these wastewaters. As a matter of fact, in some areas, natural wetlands still serve this purpose solely and are nothing more than dumping sites. However, extensive research suggested the use of Wetlands for Treatment purposes. Understanding the dynamics of the processes in natural wetlands leads to the use of those processes …
Published in International Journal of Water Resources Engineering · Vol. 8, Issue 1, 2022 · pp. 55–66 Read article
-
Effects of Field Irrigation Method on The Peanut Crop
Abstract: Most of the water resources around the world are consumed in irrigation. Irrigation water lost in field water application depends mainly on the field irrigation method. This study aims to investigate the effects of irrigation methods on the agriculture and irrigation processes of the peanut crop. In a field experiment, the area was divided into four different zones where peanut was irrigated using four different irrigation methods: drip irrigation, sprinkler …
Published in International Journal of Water Resources Engineering · Vol. 9, Issue 1, 2023 · pp. 1–10 Read article
-
Surface-Driven Capillary Flow of Dyed Working Liquid in the SU-8 based Glass Microfluidic Device Fabricated by Maskless Lithography and Indirect Bonding Technique
Abstract: A single SU-8 based glass microfluidic device is fabricated by the maskless lithography and indirect bonding technique, using the negative photoresist SU-8. Polymethylmethacrylate (PMMA) dissolved in EC solvent (SU-8 developer) is used as the prepared adhesive material in the indirect bonding technique. Dyed water (90% red coloured food dye, 10% distilled water) is prepared as the working liquid. A CMOS camera catching 25 frames per second with a corresponding time-scale …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 4, Issue 2, 2018 · pp. 26–31 Read article
-
A Review on Superhydrophobic Coating for Personal Protective Equipment in Coronavirus (Covid-19) Pandemic
Abstract: Novel coronavirus (COVID-19) infection caused by a newly acquired coronavirus. We have entered the global epidemic. It is important to maintain physical distance to prevent the spread of coronavirus among humans. However, health care workers and other paramedics worked 24 X 7 to rescue patients. While operating, the use of protective equipment is required. The use of protective equipment such as face masks, gloves and aprons is essential to prevent …
Published in International journal of Nanobiotechnology · Vol. 7, Issue 2, 2021 · pp. 10–18 Read article
-
Recent advances in utilization of wide band gap metal oxides for photocatalysis of organic waste
Abstract: Water cleaning has become a major challenge in the current scenario with huge amounts of industrial wastes being accumulated in the water bodies over the years. Traditional chemical, physical and biological processes for treating wastewater containing textile dye have disadvantages such as high cost, high energy requirement and generates secondary pollution during treatment process. The progressive oxidation processes technology has been appealing growing attention for the decomposition of organic dyes. …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 2, 2017 · pp. 1–9 Read article
-
Nanomaterial’s in Agriculture: Enhancing Crop Yield and Sustainability
Abstract: Nanotechnology has emerged as a promising frontier in agriculture, offering unique opportunities to address pressing challenges in food production and sustainability. This abstract explores the applications of nanomaterials in agriculture, with a focus on their role in enhancing crop yield and promoting sustainable farming practices. The utilization of nanomaterials in agriculture opens up new possibilities for targeted delivery of nutrients, pesticides, and growth-promoting agents. Nanoparticles, owing to their small size …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 1, 2023 · pp. 25–29 Read article
-
Regulation of Ca(OH)2 Concentration in the Hardening System “Gypsum Binder-Portland Cement” By Introducing Ash and Slag Additives when Producing Composite Gypsum Binders (CGB)
Abstract: This paper presents the results of the research and development of composite gypsum binders (CGB) based on technogenic raw materials in the form of ash and slag mixtures of fuel wastes, which reduces the consumption of Portland cement clinker up to 85% in comparison with traditional composite binders. The optimal compositions of the CGB are proposed. The impact of the type of mineral additives of technogenic origin and superplasticizer on …
Published in International Journal of Composite and Constituent Materials · Vol. 7, Issue 1, 2021 · pp. 1–8 Read article
-
Development of Fly Ash Bricks Using Alccofine as Partial Replacement of Cement
Abstract: With the growing technology in bricks industry and urbanization there is lot of requirements of raw material. Due to the limited availability of non-renewable resources, it is imperative to use additional waste materials when producing bricks in order to protect these resources. To combat the problem of environmental contamination, waste materials like fly ash, silica fume, and blast furnace slag can be utilised in place of clay. So using fly …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 2, 2022 · pp. 19–26 Read article
-
Preparation and Evaluation of Plant-Based Coir Fiber-Reinforced Polypropylene Composites
Abstract: In the present article, unidirectional coir fiber (CF) and alkali-treated CF (ACF) were incorporated in polypropylene (PP) with and without 3-aminopropyl trimethoxy silane (AS) and tetramethoxy orthosilicate (TS) to produce composites by a compression molding technique. The basic properties of PP/CF composites (e.g. tensile strength, tensile modulus, impact strength, and water absorption) have enhanced with increasing CF content. The incorporation of AS and TS after alkali pretreatment for CF composites …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 2, 2021 · pp. 34–47 Read article
-
Management of Intravenous Infusion Therapy by Nurses
Abstract: At birth, the total body weight constitutes 75% of water. It starts decline to 60% from the age of two years onwards. The total body water is compartmentalized into intracellular and extracellular fluids at birth and 20% at the age of 7 years. The distribution of the body fluid is defined by the composition of electrolytes and protein in different compartments. The concentration of electrolyte is expressed in MEq/L. The …
Published in International Journal of Cardiovascular Nursing · Vol. 6, Issue 1, 2020 · pp. 1–5 Read article
-
Biotechnological Advances in Improving Abiotic Stress Tolerance in Jute (Corchorus spp.): Genomic and Functional Insights
Abstract: Jute (Corchoruscapsularis and C. olitorius) is an economically significant natural bast fiber crop, particularly in Bangladesh and South Asia that faces severe constraints from salinity and waterlogging due to climate change and coastal inundation. Despite its agricultural importance, jute has historically lacked genomic resources for molecular improvement. Recent release of high‑quality reference genomes, coupled with transcriptomics and functional genomics, has enabled identification of stress‑responsive genes and regulatory networks. This review …
Published in International Journal of Plant Biotechnology · Vol. 12, Issue 1, 2026 · pp. 25–30 Read article
-
Reactive Separation for Biodiesel Purification Using Hybrid Membrane Systems
Abstract: Biodiesel produced through transesterification typically contains several impurities, including residual glycerol, unreacted methanol, soaps, water and homogeneous catalysts, all of which reduce fuel quality and hinder compliance with EN 14214 and ASTM D6751 standards. Conventional purification techniques such as water washing, centrifugation and vacuum distillation are energy-intensive, generate large volumes of wastewater and often fail to efficiently remove polar contaminants. To overcome these limitations, this study examines a reactive separation …
Published in International Journal of Chemical Separation Technology · Vol. 11, Issue 2, 2025 · pp. 17–30 Read article
-
How Heavy Metal Minerals Affect the Quality of Soil and Groundwater
Abstract: Heavy metal minerals polluting soil and groundwater is becoming a major environmental issue because these components are not biodegradable and last a long time. This study examines the degree to which heavy metals, including lead (Pb), cadmium (Cd), arsenic (As), mercury (Hg), and chromium (Cr), affect the chemical and physical characteristics of soil and groundwater in regions impacted by industrial, agricultural, and mining operations. Soil and water samples were obtained …
Published in International Journal of Environmental Chemistry · Vol. 11, Issue 2, 2025 · pp. 9–20 Read article
-
Evaluation of Michaelis-Menten Constants of TPH Degradation on Clay Soil
Abstract: The degradation of Total Petroleum Hydrocarbons (TPH) in petroleum-contaminated clay soil remains a major environmental concern, particularly in regions with limited remediation options. This study investigates the enzymatic kinetics of TPH biodegradation using Michaelis-Menten modeling in the presence of Bryophyllum pinnatum leaf extracts as biostimulants. Fourteen bioreactors containing 2000g of contaminated clay soil were prepared with 100ml of crude oil and treated with varying doses (100ml, 200ml, and 300ml) of …
Published in International Journal of Chemical Engineering and Processing · Vol. 11, Issue 2, 2025 · pp. 6–12 Read article
-
Investigating Physical and Durability Properties of Pervious Concrete with Fly Ash-Based GP, PPC, and FaL-G Binders
Abstract: AbstractPervious concrete is gaining prominence as a sustainable pavement material due to its enhancedpermeability, reduced runoff, and environmental benefits. This study evaluates the physical anddurability properties of pervious concrete incorporating different binders, including OrdinaryPortland Cement (OPC), Fly Ash-based Geopolymer (GP), Portland Pozzolana Cement (PPC),and Fly Ash-Lime-Gypsum (FaL-G). The key parameters assessed include permeability,porosity, dry density, salt resistance, sulfate resistance, acid resistance, water absorption, andthermal expansion. Permeability results indicate that FaL-G …
Published in International Journal of Concrete Technology · Vol. 11, Issue 2, 2025 · pp. 15–21 Read article
-
Promoting Sustainable Agricultural Practices to Mitigate Nitrate and Pesticide Contamination in Uttar Pradesh Groundwater
Abstract: Groundwater serves as an indispensable resource for human consumption, agriculture, and industry globally, holding particular significance in India, where it supports over 80% of irrigation in states like Uttar Pradesh. However, the intensification of agricultural practices, characterized by the indiscriminate application of chemical fertilizers and pesticides, has led to widespread contamination of these vital aquifers. This paper undertakes a comprehensive examination of the prevalence, primary sources, and multifaceted impacts of …
Published in International Journal of Agrochemistry · Vol. 11, Issue 2, 2025 · pp. 1–14 Read article