Search
375 articles for “FE analysis”
-
Design, Analysis, and Material Optimization of a Passenger Railway Bogie Manipulator for Enhanced Performance and Efficiency
Abstract: Abstract The study aims to improve the design and optimize the material used in passenger railway bogie manipulators to improve their performance and efficiency. It is an essential tool in railway maintenance for lifting and relocating heavy bogie assemblies. The primary goal was to reduce overall weight and material use while maintaining structural integrity and operational reliability. After verifying the system structure, the original 70 mm screw was reduced to …
Published in International Journal of Mechanics and Design · Vol. 11, Issue 2, 2025 · pp. 1–13 Read article
-
A Review Study of Steady State Thermal Analysis of Piston by Finite Element Method (FEM)
Abstract: This study explains with the previous literature survey that indicates about the inner combustion engine constituents like piston. The piston transports the energy of the burnt gasses from mechanical energy. The piston translates inside the cylinder liner or sleeve. The present effort is to study about the design of piston petrol engine. Computer aided engineering apparatus allows engineers to improve product and to pretend these designs for residual stress, structural …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 4, Issue 1, 2018 · pp. 34–39 Read article
-
A Study on Method and Modelling of Structural Analysis and Finite Elements: A Review
Abstract: The finite element method (FEM) or finite element analysis (FEA), is a numerical method usually employed for solving engineering (structural mechanics) and mathematical physics problems. Generally, the analytical solution of these problems require the solution to boundary value problems for partial differential equations. Specimens are usually tested and analysed using finite element method (FEM) for investigating the behaviour of square concrete columns confined by fibre reinforced polymer (FRP) and sheets.
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 3, Issue 2, 2017 · pp. 29–33 Read article
-
Thermal Analysis of I.C. Engine Poppet Valve Using FEM: A Review
Abstract: Abstract: Inlet and outlet valves in I.C. Engines are referred to as poppet valves. These valves are operated by the valve mechanism. When these valves are uncovered to the heat thermal stresses are evolved in order that thermal evaluation is very important to predicting and stopping failures in valves. The foremost position of the valve train is to ensure the gases change manner for all the engine speeds. The valve …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 1, 2018 · pp. 30–37 Read article
-
A Review on Hybrid Honeycomb Engine Mounts for Vibration Isolation in Variable Compression Ratio Engines
Abstract: The increasing sophistication of modern engine systems has highlighted the importance of advanced vibration control methods. Engines today are required to function under continuously changing operating conditions, particularly in Variable Compression Ratio (VCR) systems, where vibration behavior becomes highly complex, non-linear, and dependent on time. Under such circumstances, conventional engine mounts often struggle to deliver stable and consistent performance. In contrast, hybrid honeycomb structures offer significant advantages due to their …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 12, Issue 1, 2026 · pp. 29–34 Read article
-
Advancing Early Detection of Menkes Disease Through Image Analysis and Biosensor Integration
Abstract: Menkes disease, a rare X-linked recessive disorder of copper metabolism, poses significant challenges in early diagnosis due to its nonspecific initial symptoms. This paper presents a comprehensive approach to enhance the early detection of Menkes disease by leveraging image processing techniques, pattern recognition algorithms, and innovative biosensor technologies. A novel framework is proposed that combines analysis of hair microscopy images, facial feature recognition, and copper-sensitive biosensors to create a multi-modal …
Published in International Journal of Image Processing and Pattern Recognition · Vol. 10, Issue 2, 2024 · pp. 24–34 Read article
-
Simultaneous Analysis of Radar Look Angel and Placement of Features to Identification of Terrain Feature (Mianrahan Basin in West of Iran
Abstract: In this study, the effect of look angle and placement of feature than radar sensor to detection of the effects of geomorphological features was conducted simultaneously. In this study, the C-band of satellite images Sentinel -1 was used. The images were captured in two different look angles and two different look directions. Four features such as valley, blade, alluvial fans and debris was extracted by visual interpretation of the images, …
Published in International Journal of Landscape Planning and Architecture · Vol. 3, Issue 1, 2017 · pp. 1–10 Read article
-
Studies on TPC and TTC analysis from Syzygium cumini seeds through extraction and fermentation
Abstract: Syzygium cumini is the scientific name for the Java plum, a kind of medicinal plant. The plant can be found all over the plains of India, all the way to its southernmost point. This plant contains phenolic compounds, tannins, glucoside, myrecetin, ellagic acid, anthocyanins, kaemferol, and isoquercetin among other phytochemicals. It shows various pharmacological activities like Anti- inflammatory activity, Anti- Oxidant activity, Anti-microbial activity, Hepatoprotective activity and Anti Ulcer/colitis activities …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 8, Issue 2, 2022 · pp. 6–10 Read article
-
Design of Multispindle Drilling Head
Abstract: AbstractThis paper presents the design, analysis, and optimization of a multi-spindle drilling machine headaimed at enhancing productivity and efficiency in manufacturing processes. Engineered to drill multipleholes simultaneously, the multi-spindle head significantly reduces machining time and increasesoperational throughput, making it ideal for high-volume production environments where speed andaccuracy are essential. The design process begins with a thorough requirements analysis and materialselection to ensure the machine head can endure operational stresses while …
Published in International Journal of Manufacturing and Materials Processing · Vol. 10, Issue 2, 2024 · pp. 36–42 Read article
-
Review Paper on Thermal Analysis of Non-Vented (solid) Disc Brake using Ansys Software
Abstract: The disc brakes are exposed to large thermal stresses and heat during routine braking. The extraordinary thermal stresses, tremendous heat occurred in the disc during hard braking. The aim of the project or research work is to design and analysis of disc. The modelling or design of the disc is done using solid works software. The Thermal analysis is to be done on the Non-vented disc brakes using ANSYS software …
Published in International Journal of Computer Aided Manufacturing · Vol. 1, Issue 1, 2016 · pp. 01–06 Read article
-
Rectangular Microstrip Antenna Design and Analysis for Exposure System at 900 MHz with Different Feeding Mechanism
Abstract: Microstrip antennas widely used in defence applications, in aircrafts and in applications where narrow bandwidth is required. In this work an antenna is designed with 3 different feeding mechanisms. The feeding mechanism is used to provide the path for the flow of current from the source. The three different feeds are Line feed, Quarter wave transformer feed and Inset feed. The rectangular microstrip patch antenna designed at 900 MHz and …
Published in International Journal of Microwave Engineering and Technology · Vol. 2, Issue 1, 2016 · pp. 7–19 Read article
-
Experimental Study and Analysis of Coefficient of Friction for Mild Steel Under Various Lubrication Conditions
Abstract: The coefficient of friction plays decisive role in the metal-forming processes. This study focuses on determination of the coefficient of friction between work piece and lubricants using ring compression test by experiments physical modeling and finite element (FE) simulation. A series of ring compression tests were carried out to obtain friction coefficients of mild steel under lubricants including boric acid, Vaseline, grease and dry conditions. According to Male and Cockcroft …
Published in International Journal of Manufacturing and Materials Processing · Vol. 4, Issue 2, 2018 · pp. 34–42 Read article
-
Design and Finite Element Analysis of Go-Kart Tubular Chassis using Ansys
Abstract: Abstract:- The design of a go-kart chassis involves vehicle’s performance, safety, and handling characteristics. The present work focuses on the conceptual design, modelling, and structural analysis of a Go-Kart chassis aimed at achieving an optimal balance between strength, weight, and driver comfort using FEA software Ansys. A detailed chassis model was developed based on ergonomic considerations and racing standards. The design was evaluated through FEM approach to assess stress distribution, …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 1, 2026 · pp. 1–7 Read article
-
Convolutional Neural Network Algorithm for Stress Field Approximation for a Uniaxially Loaded Plate with Holes
Abstract: ABSTRACTKnowing the high stress concentration and its location around a hole is of practical importance in designing engineering structures, effective parameters can be selected in order to achieve minimum stress concentration around the hole(s). The visualisation of the stress distribution is done experimentally or numerically using finite element analysis (FEA). This study involved the approximation of the von Mises stress field distribution around regular holes in finite metallic plates, based …
Published in International Journal of Image Processing and Pattern Recognition · Vol. 6, Issue 2, 2020 · pp. 1–12 Read article
-
Design and Analysis of Centrally Suspended Cage-less Limited Slip Differential
Abstract: Limited slip differential (LSD) plays an important role in maintaining speeds and in torque distribution between the wheels of the automobile even in case of variable traction. In the present project work, limited slip differential is considered and the objective of the project is to find out tangential, axial and radial forces involved in meshing of the differential gears theoretically. Finite Element Analysis (FEA) is carried out on Final, Crown, …
Published in International Journal of Mechanics and Design · Vol. 5, Issue 2, 2019 · pp. 11–23 Read article
-
Analysis and Design of Structural Components in Offshore and Marine Engineering
Abstract: Offshore and marine engineering play a pivotal role in the global energy market, particularly in the oil and gas industry. The structural integrity of components in such challenging environments is critical, as they are exposed to harsh conditions including high winds, waves, and corrosion. This research paper aims to explore the analytical and design principles for structural components used in offshore and marine engineering, emphasizing materials, loading conditions, failure mechanisms, …
Published in International Journal of Mechanics and Design · Vol. 10, Issue 2, 2024 · pp. 1–6 Read article
-
Analysis of Critical Success Factors for Metro Construction Projects in India
Abstract: Critical success factors pertain to the objectives, principles, and economical performance of theproject. To understand goals and which methods are accustomed to achieve them and also the way tomake efficient its output, these all support designed critical success factor. It is well-known that theconstruction management or industries having dynamic nature due to its everywhere disseminationthrough technologies and within the developing countries, the construction industry is one altogetherthe foremost job creators. …
Published in International Journal of Construction Engineering and Planning · Vol. 7, Issue 1, 2021 · pp. 1–5 Read article
-
Mechanical and Thermal Performance Comparison of Nylon 6 and PET Spur Gears via Fusion 360 Finite Element Simulation
Abstract: *Author for CorrespondenceSiddesh BE-mail: [email protected] Student, Department of Mechanical Engineering, University B.D.T College of Engineering, Davanagere, Karnataka, India. Received Date: October 29, 2025Accepted Date: November 07, 2025Published Date: November 17, 2025 Citation: Siddesh B. Mechanical and Thermal Performance Comparison of Nylon 6 and PET Spur Gears via Fusion 360 Finite Element Simulation. International Journal of Mechanics and Design. 2025; 11(2): 1–7p. Abstract Polymer gears are increasingly used in engineering applications …
Published in International Journal of Mechanics and Design · Vol. 11, Issue 2, 2025 · pp. 1–7 Read article
-
Innovations and Sustainability in Structural Engineering:Advanced Materials, Seismic Retrofitting, andComputational Analysis
Abstract: Abstract This paper explores the latest advancements in structural engineering, emphasizing sustainable practices, the development of advanced materials, and innovative computational techniques for structural analysis. Structural engineering, a fundamental discipline within civil engineering, is experiencing significant growth due to increasing environmental challenges, stricter building codes, and the need for more resilient infrastructure. To meet modern demands, advanced materials like high-performance concrete, fiber-reinforced polymers (FRPs), and shape memory alloys (SMAs) have …
Published in International Journal of Structural Engineering and Analysis · Vol. 10, Issue 2, 2024 Read article
-
Design And Finite Element Analysis Of RCC And Timber-Composite RCC Columns with Seismic Effect
Abstract: This study presents the design and finite-element analysis (FEM) of three reinforced cement concrete (RCC) column configurations under seismic effect, with the objective of quantifying how a central Sal-timber core alters the structural performance of an otherwise conventional RCC column. All three columns are of identical external size (300 × 300 mm) and clear height 3.0 m, fixed at both ends, and use M30 concrete, Fe500 steel, 4–16 mm φ …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 2, 2026 Read article