Search
57 articles for “base shear”
-
Comparative statis analysis of Regular and irregular building
Abstract: ABSTRACT: In this paper is increased safety and evaluate the seismic performance of Irregular and Regular building. There are several numbers of factors affecting the behavior of building. In the this paper work a parametric study is performed on Irregular and Regular plan of building with infill wall 230 mm thick and internal wall 115 mm thick provide at G+15 storey with Regular and Irregular building in seismic zone IV …
Published in International Journal of Structural Engineering and Analysis · Vol. 3, Issue 2, 2017 · pp. 29–34 Read article
-
Seismic Vulnerability Assessment and Enhancement of Steel Moment Resisting Frame with Hybrid Damping System
Abstract: Installation of energy dissipaters enhances the energy dissipation capacity of the structure. For an earthquake response, energy dissipation capacity and an innovative approach of design of these systems, this research work recommends use of Steel moment resisting frame (SMRF) enhanced with passive energy dissipaters. Non-linear time history analysis of a ten storied steel structure is carried out, with incremental dynamic loading of seven scaled earthquake ground motion time history records. …
Published in International Journal of Structural Engineering and Analysis · Vol. 7, Issue 1, 2021 · pp. 1–10 Read article
-
Progressive Collapse of G+4, G+7, G+11 Building Subjected to Blast Load
Abstract: This project work presents the progressive collapse analysis of low rise mid rise and High rise RCC building for blast load. In structure due to the spread of local damage form one part to another part or proportionately big part of the structure gets collapsed in progressive collapse. Progressive collapse analysis is performed on low rise for G+4, medium rise for G+17 and high rise for G+22 building and its …
Published in International Journal of Structural Engineering and Analysis · Vol. 7, Issue 2, 2021 · pp. 26–34 Read article
-
Comparison and Analysis of Seismic Behavior of Multistoried RCC Building with Friction Dampers and Fluid Viscous Dampers
Abstract: This paper deals with effect of position and number of friction dampers on response of 2D frame. To fulfill this objective, five bay and fifteen story 2D frame is analyzed using software ETABS-2017. The study is carried out using two, three and four number of friction dampers with different locations keeping slip load and stiffness constant. As the behavior of friction damper is elasto-plastic, the Nonlinear time history analysis of …
Published in International Journal of Structural Engineering and Analysis · Vol. 8, Issue 1, 2022 · pp. 34–39 Read article
-
Comparative Study on Response of High-Rise Building with Normal Framing, Transfer Girder and Transfer Floor
Abstract: The rapid developments in the modern infrastructure in the present decades for High rise building requires deep knowledge of architectural and Structural design. To meet the architectural demand and to provide sufficient parking space in high rise building the structural element such as Transfer Floor and Transfer Girder are commonly design. The present research study focus on the behavior of high rise building with Transfer Girder and Transfer Floor. Total …
Published in International Journal of Structural Engineering and Analysis · Vol. 9, Issue 2, 2023 · pp. 19–31 Read article
-
Prediction of Shear Strength Parameters Using Multiple Regression Analysis
Abstract: Shear strength is a principal engineering property of soil. It controls the stability of a soil mass under structural loads and is used in design of foundation. In this study, a survey was carried out in and around the Bhauti region of Kanpur district, Uttar Pradesh and accordingly nine sampling locations was identified. All the samples were collected from a depth of 50 cm and analyzed for different geotechnical properties …
Published in International Journal of Landscape Planning and Architecture · Vol. 5, Issue 2, 2019 · pp. 26–39 Read article
-
Free Vibration Analysis of Laminated Composite Plate with Various Boundary Condition Using FEM
Abstract: The vibration analysis of laminated composite plates is analyzed using finite element method. A suitable finite element model is proposed and developed based on first order shear deformation theory using ANSYS parametric design language (APDL) code. The model has been developed using an appropriate eight node isoparametric element (SHELL281) from the ANSYS element library. In this paper Numerical results have been computed for the effect of material properties, thickness ratio …
Published in International Journal of Composite Materials and Matrices · Vol. 2, Issue 1, 2016 · pp. 1–7 Read article
-
Hydrodynamic Study Through Computational FluidDynamics of Radial Flow Membrane Module
Abstract: Historically Crossflow Membrane modules came first in the membrane-based separation (MBS)process. Its high shear generation overcomes two non-idealities concentration polarization andsubsequent fouling. Primarily, high shear generation and large surface area create a positive domainfor large applications. Thereafter, feed flow rate-dependent shear generation creates a hindrance.This obstruction is overcome with Dynamic Shear Enhanced Membrane Filtration Pilot (DSEMFPs).Low surface area is a vital drawback of DSEMFPs. This radial flow membrane module with …
Published in International Journal of Polymer Science and Engineering · Vol. 10, Issue 1, 2024 · pp. 8–15 Read article
-
AN INTEGRATED COMPUTER-AIDED PROCESS PLANNING SYSTEM FOR THE MANUFACTURING OF A LEAF SPRING
Abstract: Computer-Aided Process Planning (CAPP) is a key enabling technology for integrating product design and manufacturing in a Computer Integrated Manufacturing (CIM) environment. This paper presents the development and implementation of an integrated, feature-based CAPP system for the manufacturing of an automotive leaf spring assembly. The proposed system bridges the gap between CAD and shop-floor activities by directly mapping design features to manufacturing operations. High-level manufacturing features such as base profiles, …
Published in International Journal of Computer Aided Manufacturing · Vol. 12, Issue 1, 2026 · pp. 10–23 Read article
-
An overview on the rheology of recycled aggregate concrete with the influence of chemical admixtures
Abstract: : Concrete is one of the most widely used construction material because of its property to be moulded into any kind of structure and shape due to its fluidity at early stages. The fresh properties of concrete can be characterized by its flow behaviour. Rheology is the scientific description of flow properties. Super-plasticizers and air-entrainers are some of the most used chemical admixtures that affect the rheological parameters of fresh …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 14–24 Read article
-
A Review of Recent Developments in Solid State-Based Metal Additive Manufacturing: Friction Stir Additive Technique
Abstract: In the age of machines, the whole industry needs light-weight and high strength for lighter devices, machines, etc. The core aerospace industry needs lighter materials for satellites and rockets. Friction Stir Additive Technology (FSAT)represents an innovative approach aimed at leveraging the principles of layered build (AM) layer by layer using solid state (FSW) friction stir welding technology. These represent a particular class of friction-based additive technology (FAT) and can easily …
Published in International Journal of Manufacturing and Materials Processing · Vol. 8, Issue 2, 2022 · pp. 17–25 Read article
-
Manufacturing of BWP-Grade Plywood from Resin Adhesive Using Animal Protein (Glue) by Partial Replacement of Phenol
Abstract: Abstract This paper presents the development of plyboard using phenol–glue–formaldehyde (PGF) resin and their basic mechanical properties. Phenoplast and aminoplast-based resins is the important adhesive for the manufacturing of boiling water proof (BWP) grade, shuttering and moisture resistance plywood. Environmental concerns and higher cost of petroleum-based resins have resulted in the development of technologies to replace phenol partially by biomaterials for the manufacturing of resin adhesive. Natural bio-based materials such …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 Read article
-
Thermally Induced Stresses in Cross-Ply Laminated Plates Using Four Variable Theory
Abstract: A thermal analysis of simply supported isotropic, orthotropic, two layer antisymmetric and three layer symmetric composite laminated plates is presented. A four variable trigonometric shear deformation theory is used. This theory has only four unknown variables as compared to other higher order theories with five or more than five unknown variables. This is a displacement based equivalent single layer theory. The in-plane displacement field of this theory consists of trigonometric …
Published in International Journal of Structural Engineering and Analysis · Vol. 6, Issue 2, 2020 · pp. 35–54 Read article
-
Impact of Landslides on Water Resource Management: Challenges and Mitigation Strategies
Abstract: Heavy rainfall often causes water to accumulate at the base of mountains, leading to soil saturationand the formation of mud with significantly diminished shear strength. This weakened soil conditioncannot withstand the shear stress imposed by the weight of the mountain, resulting in slope instabilityand subsequent landslides. Such landslides not only pose risks to infrastructure and human safety butalso have substantial effects on water resource management. Landslides disrupt natural water flow,cause …
Published in International Journal of Water Resources Engineering · Vol. 10, Issue 1, 2024 · pp. 21–28 Read article
-
Effect of Varying Shear Velocity on the Mechanical Behavior of Jointed Rock Subjected To Lower Normal Load
Abstract: : This study investigates the effect of shearing velocity on the mechanical behavior of rock joints, namely, the shear strength, residual strength, joint dilation, its surface roughness and the shearing stiffness under the application of lower normal load. The slower rate of shearing plays an important role in creep and the fatigue effect on jointed rock masses whereas, higher rate of shearing is experienced in the cases of dynamic loadings …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 2, Issue 1, 2016 · pp. 1–11 Read article
-
Performance Characterization of Couette FlowMembrane Module Through Computational FluidDynamics
Abstract: Membrane-based separation has been in rigorous applications in health services since the last fewdecennia. Dynamic Shear Enhanced Membrane Filtration Pilots (DSEMFPs) is a promising membranemodule. The first reported DSEMFPs was a Couette flow type module in 1985. It was used for collectingplasma from donors. This module consists of two concentric cylinders. The outer one is fixed while theinner one is rotating, having a membrane on the outer surface of it. …
Published in International Journal of Composite Materials and Matrices · Vol. 10, Issue 1, 2024 · pp. 1–5 Read article
-
Analysis of Optimal Clearance Volume Between Two Concentric Cylinders in a Couette Flow Membrane Module Using a Computational Fluid Dynamics Approach
Abstract: Membrane-based separation has become an integral part of the separation industry due to its diverse applications across various fields. However, this progress is often hindered by two major challenges: fouling and concentration polarization. Many membrane modules have made significant efforts to overcome these obstacles, yet a satisfactory solution to mitigate these issues and facilitate membrane-based processes in the separation industries is still needed. These issues are successfully handled using Dynamic …
Published in International Journal of Environmental Chemistry · Vol. 11, Issue 1, 2025 · pp. 135–143 Read article
-
Thermal Material Used in Aerospace for Protection
Abstract: Ablative nanocomposites were set up by fusing multiwall carbon nanotubes (MWCNT) into phenolic gum and after that impregnating them into rayon-based carbon texture. MWCNT were mixed into phenolic gum at 0.5, 1, and 2 wt% loadings utilizing a mix of sonication and high shear blending to guarantee uniform scattering of MWCNT. The composite test examples were tried by utilizing an oxyacetylene test bed (OTB) applying a warmth flux of 1000 …
Published in International Journal of Composite and Constituent Materials · Vol. 2, Issue 2, 2016 · pp. 1–2 Read article
-
Characterization of the Impact Strength in Cryogenic Treatment of TIG Welded Nickel-based Superalloy
Abstract: The TIG welding of the IN617 heat and oxidation resistant has been precisely controlled through welding parameters, while γ'-Ni3(Al, Ti) phases predominantly controlled solution strengthening, and precipitation strengthening and carbides in γ matrix, as well as γ' precipitate’s shearing mechanism is prominent to enhance strength of superalloys. The high hardness has been preserved owing to strengthening major elements such as Cr, Co, and Mo etc., and the well coherency maintain …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 2, 2023 · pp. 1–12 Read article
-
Structural Behavior and Fire Resistance of Shallow Steel-Concrete Composite Decks
Abstract: This study investigates the structural behavior and fire resistance of Shallow Steel-Beam-Concrete Composite (SSCC) decks, focusing on the influence of various Steel-Concrete (SC) bonding techniques. SSCC decks combine steel beams with concrete slabs, offering structural efficiency and durability under significant loads. The effectiveness of SC bonding methods is evaluated by comparing experimental results to Full Composite Action (FCA) simulations. Fire resistance in shallow floors, particularly SlimFlor systems, is analyzed using …
Published in International Journal of Composite Materials and Matrices · Vol. 10, Issue 2, 2024 Read article