All articles
7057 articles
-
Review of Automotive Transmissions for Adapting Digital Display Technology
Abstract: ABSTRACTDigitizing the systems and processes to get in line with the era of Industry 4.0 has become a paramount situation demanding efforts in the direction. This epoch of changing technology has caused many industries to suffer backlog. The other industries with survival instinct bank upon different tools like IoT, digitization, digitalization, artificial intelligence, etc., to name few to pave their way on the roadmap of Industry 4.0. The automotive industry …
Published in International Journal of Microwave Engineering and Technology · Vol. 6, Issue 2, 2020 · pp. 7–17 Read article
-
Fabrication of Grain Cleaning Machine
Abstract: Agriculture plays a significant role within the Indian economy. Indian agriculture is on the horizon and one in every of the foremost challenges is to reverse the decline in agriculture. The post-harvest cereals contain various amounts of non-grain (MOG) materials like stone, pod, trunk and trash. MOG classification is very important to boost the standard of the food. The development of the grain separation machine produces a review of previous …
Published in International Journal of Mechanics and Design · Vol. 6, Issue 1, 2020 · pp. 17–20 Read article
-
Design and Fabrication of Drainage Water Filter
Abstract: For this project, the idea of the proposal is to replace the manual work on drainage water filtration and cleaning with an automated system. We know that water has great value to human health, drainage is full of waste such as polythene, bottles, etc. The drains are shut off due to this dirt in the water. The drains are used for dumping and unfortunately sometimes there can be a loss …
Published in International Journal of Mechanics and Design · Vol. 6, Issue 1, 2020 · pp. 6–11 Read article
-
Experimental Investigation on Mechanical Failure of Bio-Implant Material for Orthopedic Applications
Abstract: Loss of limbs or destruction of bones in accidents and battle requires partial or complete replacement of the damaged body parts and bones in particular for complete recovery. The materials which can be used as artificial bio-implants for the replacement must be bio-Integrable as well as biocompatible with the host human body and possess very high mechanical properties to withstand high wear and stresses involved in various joints. Existing research …
Published in International Journal of Mechanics and Design · Vol. 6, Issue 1, 2020 · pp. 21–28 Read article
-
Solar Assisted Dehumidification Systeme Using Liquid Desiccant (Fabrication)
Abstract: A dehumidifier is a device which removes moisture from air and makes the air dry. A solar assisted dehumidifier using liquid desiccant has advantages of being solar powered as well as use of liquid desiccant increases the efficiency and minimizes the health hazards.
Published in International Journal of Mechanics and Design · Vol. 6, Issue 1, 2020 · pp. 12–16 Read article
-
A Review: Multipurpose Seed Sowing Machine
Abstract: The present review provides transient info concerning the varied varieties of innovations tired seed sowing instrumentality. the essential objective of sowing operation is to place the seed and plant food in rows at desired depth and seed to seed spacing, cowl the seeds with soil and supply correct compaction over the seed. The comparison between the normal Sowing technique and also the new projected machine which might perform variety of …
Published in International Journal of Mechanics and Design · Vol. 6, Issue 1, 2020 · pp. 1–5 Read article
-
Effects of Compressor Pressure Ratio and Combustion Chamber Exhaust Gases Temperatures on Gas Turbine Cycle Performance
Abstract: Today, we are seeing an increasing share of gas power plants in the production and supply of electricity therefore, it is essential to know the impact of different factors on the performance of these plants.The main purpose of this study is to investigate the effect of different parameters such as compressor pressure ratio and temperature of the combustion chamber on the performance of gas turbines .First, the thermodynamic relationships governing …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 6, Issue 1, 2020 · pp. 1–6 Read article
-
Design of Pressure Controller for Fuel Injector Tester Modelling
Abstract: To design and develop fuel injector testing machine at Diesel Locoshed, Kalyan, Maharashtra in order to create a base of automation to the traditional technique of testing a fuel injector which includes fuel pattern test and leak off time test respectively which concludes in preventing the time losses in process and leads to increase in precision thus reducing human effort.
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 6, Issue 1, 2020 · pp. 7–11 Read article
-
Waterjet Peening Process: A Review
Abstract: Water jet machining is few of the most adaptive and unconventional type of machining with huge advantage over the conventional type machining. Depth of cut measurement is a vital component in evolution of completely automated Abrasive Waterjet (AWJ) machining system. While cutting Ti-6Al-4V under waterjet, it is important to measure the depth of cut of material at the instant of cutting. This is a major drawback of Water Jet Machining …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 6, Issue 1, 2020 · pp. 12–14 Read article
-
Project on Pulsar 150 CC Engine Modifications for Race Purpose
Abstract: The Bajaj Pulsar is the ultimately popular 220 cc. The Baja pulsar 135/150/180/220cc are depended on the previous design which has been in motorbikes owned by Bajaj Auto situated in India. Currently there are eight unique variants available, with engine capacities of 125 cc, 150 cc, 160 cc, 180 cc, 200 cc, and production since its development in 2001, while the Pulsar 160/200 cc are based on a platform. It …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 6, Issue 1, 2020 · pp. 19–21 Read article
-
Remapping of ECU Engine (KTM 390)
Abstract: Modern engines in automobile industry are controlled digitally with the help of engine management unit (EMU) which is programmed with the help of engine dyno manually to get the desired power, efficiency. Emissions Engine map of a four cylinder engine is tuned with the help of algorithm by using engine dynamometer as well as EMU, engine speed and throttle position is obtained by algorithm of air fuel ratio to obtain …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 6, Issue 1, 2020 · pp. 15–18 Read article
-
Boundary Layer Separation with Steady and Unsteady Flow of Fluid and Slip and No-Slip Boundary Conditions: A Review
Abstract: Fluid mechanics is that branch of science which deals with the study of the static, kinematics and dynamic aspects of fluids (liquids or gases). By fluid statics, we mean the study of fluid at rest, by fluid kinematics we mean the study of fluids in motion when the pressure forces are not considered, and by fluid dynamics we mean the study of fluids in motion when the pressure forces are …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 1, 2020 · pp. 14–21 Read article
-
Importance of Mathematical Modeling (Response Surface Methodology) in Equal Channel Angular Pressing
Abstract: Severe plastic deformation is a technique for producing a deformation. Equal channel angular pressing is one of the unique methods for producing high plastic deformation in Aluminum alloys due to its quality of having the same dimensions after processing. In present work, A die was designed on the basis of a mathematical model generated by RSM. Variation in die geometry and other conditions were represented in present work. ANOVA presented …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 1, 2020 · pp. 46–54 Read article
-
Graphene and Carbon Nanotube-PLA Composite Feedstock Filament for Fused Deposition Modelling:Review
Abstract: 3D printing or AM has revolutionized the way of manufacturing by designing complex structure in atomized features which cannot be realized by conventional processing method. Many are adopting Additive Manufacturing over traditional method to manufacture sophisticate products from single or composite material. 3D printing has a demerit that the mechanical properties of product suffer. To address this problem, this study is conducted for development of improved and sustainable feedback material …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 1, 2020 · pp. 22–26 Read article
-
Systematic literature Review of PLA-Magnesium Composite Material for Fused Deposition Modelling for Biomedical Applications
Abstract: Magnesium is one of most liberally available metal in nature forming about 2% of earth’s crust. Polylactic acid or Polylactide is a bioplastic. Magnesium-Polylactide composites are a promising new form of biodegradable materials with established good mechanical properties. Our critical survey of research papers helped us to compile information about fabrication and treatment of this composite material using various techniques and methodologies to understand prospects for future research for FDM …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 1, 2020 · pp. 1–4 Read article
-
Modeling, Analysis and Vibrational Behaviour of A Steam Turbine Blade
Abstract: In this research work, the 2nd LP stage of 250MW steam turbine that having 102 blades is considered and blade geometry for various cross-sections had developed with inputs given as co-ordinates which is from blade root to tip of the portion by using UNIGRAPHICS. In order to achieve its desired performance for a steam turbine blade, the blade material has to withstand ambient conditions such as loading, temperatures, pressures and, …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 1, 2020 · pp. 27–45 Read article
-
Formulation and Characterization of Polyhydroxyalkanoates Copolymer Nanoparticles for Controlled Drug Release
Abstract: The present study was focused on the formulation of polyhydroxyalkanoates copolymer nanoparticles (PHANPs) for in vitro controlled release of the drugs, viz. levofloxacin and amoxicillin. The PHANPs were synthesized by a triple emulsion method and conjugated with amoxicillin and levofloxacin to improve its remedial bioavailability. The PHANPs and drug conjugatedPHANPs were analysed using Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR) spectroscopy and X-Ray Diffraction (XRD). The cell viability % …
Published in International journal of Nanobiotechnology · Vol. 6, Issue 2, 2020 · pp. 1–11 Read article
-
Organic Food Products: A Way towards Healthy Life
Abstract: Expanding interest for organic food and rising wellbeing cognizance among the individuals in the present situation drove the analyst to learn about the conduct of customer towards the organic items, its price, consciousness of buyers towards organic items and so forth in a progressively escalated manner.Farmers are not allowed to use synthetic pesticides,oil-based fertilizers and other harmful chemicals.Organic food advances a parity of human, other living beings and the nature …
Published in International journal of Nanobiotechnology · Vol. 5, Issue 2, 2019 · pp. 56–61 Read article
-
Gain Enhancement with Microstrip Patch Antenna Array and Slot
Abstract: ABSTRACTIn this study, a microstrip fed patch antenna array for application in the ISM band was implemented using the HFSS software. A slot antenna array was designed with the purpose of gain enhancement as well as reduction of return loss. There is some fluctuations from the desired design frequency due to some designing error and some imperfection in the impedance matching at the feeding point which can be further be …
Published in International Journal of Microwave Engineering and Technology · Vol. 6, Issue 1, 2020 · pp. 18–26 Read article
-
Nano Ultraviolet Finishing of Textiles Using Inorganic UV- Blockers–The Sustainable Approach of Producing Protective Clothing for Better Tomorrow
Abstract: The diminution of the ozone stratum,due to global warming, is likely to intensify existing health effects caused by exposure to ultraviolet (UV) radiations, as stratospheric ozone is a predominantly effective UV radiation absorber. As the ozone layer becomes thinner, the protective filter provided by the atmosphere is gradually abridged. Subsequently, human beings and the environment are exposed to higher UV radiation levels, particularly higher UV-B levels, which have the greatest …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 1, 2020 · pp. 23–33 Read article