Search
639 articles for “Construction”
-
On Line Process and Regulator Control (Detailed Version)
Abstract: Modern manufacturing practices and advancement in process control technology are accompanied and faces two problem, namely, (i) to provide quality goods and services and (ii) to contend with limited resources. Statistical modelling methods can provide broad and effective means to address this problem. Process control practitioners, in the Statistical Process Control (SPC) and the Automatic Process Control (APC) areas have endeavoured to integrate SPC and APC for more than half …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 4, Issue 2, 2018 · pp. 37–62 Read article
-
Crystals (Thermotropic phases and Lyotropic phases) in Physical Properties
Abstract: In the current years there has been a cumulative growth to add the numerous nanomaterials to liquid crystals which is encouraged via frequent elements of resources advance. (i) accumulation of nanomaterials can conversion and thus melody the belongings of the liquid crystal (ii) inventive functionalities can be added to the liquid crystal (iii) the self-organization of the liquid crystalline formal can be abused to pattern systematic structures or to assignment …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 5, Issue 2, 2019 · pp. 16–22 Read article
-
Deep Sea Rock Drill Fluid Improved Performance by Addition of Nanomaterials
Abstract: This review contains descriptive issues about improvement in bentonite-based drill fluid after nano matter addition applicable to oil and gas well. This is to improve high-temperature access as well as viscous-dynamic performances under low fluid loss. Oil-based drill fluid seemed to be more favorable as restrict seal by mud cake containing shale whereas water-based drill fluid is economical and ecofriendly. Shale of mine is often searched as the sacred source …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 1, 2021 · pp. 29–38 Read article
-
Evaluation of Strength in Natural Bricks by Using Mineral Admixtures
Abstract: In the construction field nowadays substructures and superstructure are adopted by bricks only for the framed type of structure and also load bearing wall adopted for bricks in super structure works. Last four decades in our Tamil Nadu more number of bricks were used for the buildings. In this work, it is decided to design an alternate to clayey soil with addition of stabilisers such as fly ash, rice husk …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 85–89 Read article
-
A Study on Mechanical Properties and Fracture Behavior of Chopped Fiber Reinforced Self-Compacting Concrete
Abstract: The development of self-compacting concrete (SCC) is innovatory landmark in the history of construction industry resulting in predominant usage of SCC worldwide nowadays. It has many advantages over normal concrete in terms of enhancement in productivity, reduction in labor and overall cost, excellent finished product with excellent mechanical response and durability. Further, incorporation of fibers enhances its properties specially related to post crack behavior of SCC. Hence, the aim of …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 90–122 Read article
-
Study of the Effect of Water Retarding Concrete Admixtures on the Properties of Concrete
Abstract: Water retarding concrete admixtures and super plasticizer are extensively utilized to recover the structural and mechanical properties of fresh and hardened concrete. These admixtures are more regularly used in pre-stressed concrete, slim components with overfilled and densely filled reinforcement, beams and slabs pre-cast basics and long slender column. In current decades, marvelous success has been attained in the progression of chemical admixtures for Portland cement. Most efforts have concentrated on …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 1, 2018 · pp. 10–14 Read article
-
Simulation Models for Flexural and Compressive Strength of Concrete Using Waste Glass as Partial Replacement.
Abstract: The research present the usefulness of waste glass in the production of grade 20 concrete using partial replacement levels of 0%, 20%, 40% and 60%, respectively, for coarse glass and fine glass to coarse aggregate and fine sand aggregate. The results obtained indicate that, for the purpose of construction works, 20% replacement should be adopted either for coarse glass or fine glass replacement. Simulation models were established to predict flexural …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 2, 2018 · pp. 1–7 Read article
-
Compressive Strength, Water Absorption and Temperature Effects on Partial Replacing Cement with GGBS, Micro Silica and Fly Ash
Abstract: Widespread research work for decades also in development throughout the globe in concrete technology in finding substitute materials which can incompletely change Pozzolonic Portland Cement (PPC) and which can also meet the necessities of the strength and durability performance of industrial by products like micro silica, ground granulated blast furnace slag, fly ash, etc. now termed as complimentary cementations materials (CCM) are quite promising. The increased quest for sustainable and …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 2, 2018 · pp. 30–37 Read article
-
Bidding Strategy for Building Projects Based on Game Theory
Abstract: The owners of construction projects typically apply a competitive bid process to award a contract to the qualified bidder who submits the lowest price. For the contractors, it is very difficult to decide an optimal mark-up and bid value to win the contract and at the same time to secure sustaining profitability as high as possible. For that, from the various literatures related to the bidding problems, the factors are …
Published in International Journal of Construction Engineering and Planning · Vol. 5, Issue 1, 2019 · pp. 1–11 Read article
-
Determination of the optimum magnetic exposure time for magnetic water concrete
Abstract: The purpose of this study was to investigate the effect of magnetic water on the workability and compressive strength of concrete, and also to find the optimum time for exposing water to magnetic field, for which maximum compressive strength of concrete will be achieved. In this research, water was exposed to magnetic field of 336mT per magnet for a duration of 12, 18, 24, 36, and 96 hours, after which …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 1, 2020 · pp. 34–42 Read article
-
Impact of Sugarcane Molasses on Compressive Strength and Workability
Abstract: Molasses used as admixture increase the workability, it is a by-product of sugar industry. In this study, mechanical property such as compressive strength and workability of concrete adding fly ash and sugarcane molasses has been investigated. Adding the molasses in concrete increase the compressive strength, delay the initial and final setting time, reduced the bleeding and segregation of concrete and decrease the W/C ratio. The compressive strength test results showed …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 1, 2020 · pp. 1–5 Read article
-
Study on Rural Infrastructure availability and wellbeing in Karisalkulam Village
Abstract: Rural development is the process of developing rural areas through improving the quality of living for rural people. Development not only means technology and education but also gaining and accepting ability of culture to adopt the new era to compete with the outer world. The planning and strategies for rural development are mainly concerned with Gram Panchyats, schools, higher educational institutes, industries and labor needs. The aim of this study …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 1, 2020 · pp. 25–34 Read article
-
Experimental Study of Replacement of VSI Sand by Sea Sand in Concrete
Abstract: Concrete is a construction material used widely over the world and it is very difficult to find versatile alternative for concrete. Concrete is made up of cement, fine aggregates (sand), coarse aggregates and water. Fine aggregate is one of the constituents of concrete which influences concrete mix design substantially. Generally river sand / crushed sand is used as fine aggregate. But considering today’s situation, due to greater demand of river …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 2, 2020 · pp. 8–14 Read article
-
Planning, Estimation, Costing, and Scheduling of Commercial Building using MS Project
Abstract: Planning, estimation, and scheduling are very important in a construction project and it helps toavoid delays in the project. The current project deals with planning, costing, estimation, andscheduling of office buildings. It is a G+5 reinforced concrete framed structure with modern features.The emergency exit and slope have been provided at the opening of the building for hassle-freemovement of disabled people. The building is planned in accordance with the National Building …
Published in International Journal of Construction Engineering and Planning · Vol. 7, Issue 1, 2021 · pp. 14–35 Read article
-
Life Cycle Cost Analysis and Designing
Abstract: Within creasing population in rapidly developing smart cities, sewage treatment has become necessary for treating sewage before disposing git off in water body as it can cause harm to human and aquatic life. Different sewage treatment methods are being used and a comparative study is done of Up-flow Anaerobic Sludge Blanket (UASB) process, Activated Sludge Process (ASP), Sequence Batching Reactor (SBR), Membrane Bioreactor (MBR). Life Cycle Cost Analysis (LCCA) is …
Published in International Journal of Construction Engineering and Planning · Vol. 7, Issue 2, 2021 · pp. 29–35 Read article
-
Individual and Combined Effects of Lead Rubber Bearing and Fluid Viscous Damper Techniques on Seismic Response of Irregular Reinforced Concrete Buildings
Abstract: Most old structures that do not meet current seismic regulations may sustain significant damage or perhaps collapse as a result of an earthquake. The seismic enhancement could potentially help people survive a major earthquake. Since earthquake engineering began, not only in India but also in other nations, earthquake-resistant construction of reinforced concrete buildings has been a constant topic of research. Buildings are still being damaged as a result of earthquakes. …
Published in International Journal of Construction Engineering and Planning · Vol. 8, Issue 2, 2022 · pp. 17–28 Read article
-
A Review on Old Building Environment and Indoor Microbials
Abstract: People naturally want to comprehend their surroundings. Today, developed nations spend over 90% of their populations indoors, mostly in structures and environments constructed, controlled, and planned by humans. Since individuals go from their homes to their employment, germs are continuous with and around them. Indoor microorganisms cohabit with outside soil and water bacteria. It is commonly found in animals, plants, rodents, and water tracked indoors on shoes and breathed in. …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 2, 2023 · pp. 1–5 Read article
-
Innovative Concrete Composites: Assessing Mechanical Strength with Fly Ash, Glass, and Granite Waste Incorporation
Abstract: Waste management poses a significant challenge for countries in both current and future contexts. The generation of solid waste from various industries, such as stone, glass, coal, and tires, constitutes a major issue in India, leading to significant environmental and health concerns for the surrounding population. This study addresses these challenges by exploring the utilization of waste granite and glass powder as materials to replace sand and cement, respectively, with …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 2, 2023 · pp. 37–45 Read article
-
Utilization of Steel Slag as Course Aggregate
Abstract: Concrete is the third largest material consumed by human being after food and water as per WHO. Concrete plays a vital role in the design and construction of the nation’s infrastructure. Almost three quarters of the volume of concrete is composed of aggregate. These are obtained from natural rocks and river beds, thus degradation them slowly. This issue of environment degradation, and need for aggregates demands for the usage of …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 14–18 Read article
-
Effect of Elevated Temperature on Compressive Strength and Flexural Strength of Fiber Reinforced Concrete
Abstract: Now a day concrete is being used extensively in the construction that might be subjected to elevated temperatures. The behavior of concrete structures at elevated temperatures is significant importance in predicting the safety of structures in response to certain accidents or particular service conditions. This paper deals with the mechanical properties of concrete with steel fibers subjected to temperatures up to 500°C. The specimens were kept in oven for 1 …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 19–32 Read article