Search
574 articles for “E-waste”
-
Development of Superabsorbent Polymers from Natural Sources
Abstract: Superabsorbent polymers (SAPs) are special materials that can absorb and hold a very large amount of water compared to their own weight. They are commonly used in products such as baby diapers, sanitary items, agriculture, and wastewater treatment. Most of the SAPs used today are made from petroleum-based chemicals. These materials do not easily break down in nature and may cause environmental pollution. Therefore, it is important to develop safer …
Published in International Journal of Metallurgy and Alloys · Vol. 12, Issue 1, 2026 · pp. 25–34 Read article
-
Mass Transport of Heavy Metals in Soil Columns Amended with Biochar Nanoparticles
Abstract: Biochar has potential as a valuable material for removing heavy metals from wastewater. The biochar obtained by pyrolysis of the Pomegranate Peel (PPBC) under an oxygen-limited atmosphere in a muffle furnace at 450°C. The biochar was also analyzed through SEM and FTIR for identification of particle size and functional groups. Therefore, the present work aims to study the effect of adding biochar to the soil columns (10 cm length and …
Published in International Journal of Agrochemistry · Vol. 6, Issue 1, 2020 · pp. 62–72 Read article
-
Review on Preventive Instructions for Controlling Infectious Diseases
Abstract: The pathogens of infection are transmitted in health care centers in various ways and from a variety of sources such as air, water, food, insects, and rodents and possibly animals such as cats, patients themselves, medical personnel, visitors, cleaners, surfaces, tools and devices. Tools and surfaces are a major source of infection transmission, and a recent study showed that a large percentage of the phones of health sector workers showed …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 7, Issue 1, 2021 · pp. 22–28 Read article
-
A Review on Bioethanol Production
Abstract: Bioethanol is a renewable and bio-based form of alcohol that serves as an important alternative to fossil fuels, primarily as a transportation fuel and an additive in gasoline and has various other industrial applications. The production of fuel ethanol (which is also referred to as "bioethanol") from renewable lignocellulosic materials has the potential to lessen global petroleum demand while lowering the overall release of carbon dioxide, the primary contributor to …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 9, Issue 2, 2023 · pp. 1–5 Read article
-
Accelerometer-based Hand Gesture Controlled Robot Car Using Arduino
Abstract: This paper introduces a gesture controlled user interface (GCUI) template and discusses software, application and usability patterns. It provides an integrated approach to real-time detections, gesture-based information that control the movement of vehicles, and user gesture manipulation using hand movements. Adaptation is a three-axis accelerometer. The accelerometer also moves accordingly as the person moves his hand. The movement is accelerometer-captured and gesture-processed. Today, communications between human beings are moving away …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 5, Issue 2, 2019 · pp. 1–8 Read article
-
Design of Leachate Treatment Plant for Adharwadi Dumping Waste
Abstract: Generation of municipal solid waste (MSW) is increasing due to urbanization, commercialization, and rising population. This result in leachate generation from MSW landfill and dump side. Leachate from dumpsite is the major environmental problem as it causes surface water pollution, ground water pollution and land pollution. Leachate is defined as a liquid that passes through a landfill and has extracted dissolved and suspended matter from it Raghab et al. 2013. …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 6, Issue 2, 2020 · pp. 11–15 Read article
-
Strategic Plans for Handling Water Quality Issues in Nigeria: A Case Study of Lagos State
Abstract: Availability, affordability and accessibility of quality of water are essential tool for effective management of water resources, achievement of better public health, sustainable development and wealth of all living things in any nation across the globe. Human beings and aquatic life require potable and good quality water for survival. This paper studied the Lagos state experience on water quality related issues. Methodology adopted includes literature survey, collection of data on …
Published in International Journal of Water Resources Engineering · Vol. 7, Issue 2, 2021 · pp. 10–20 Read article
-
POWER GENERATION FROM MICROBIAL FUEL CELL
Abstract: Microbial fuel cells (MFCs) give new chances to the practical generation of vitality from biodegradable, decreased mixes. MFCs capacity on diverse starches additionally on complex substrates present in wastewaters. So far there is restricted data accessible about the vitality digestion system and nature of the microorganisms utilizing the anode as electron acceptor; few electron exchange instruments have been built up unequivocally. [3]-[6]. Depending on the operational parameters of the MFC, …
Published in International Journal of Analog Integrated Circuits · Vol. 1, Issue 2, 2015 · pp. 10–16 Read article
-
Cognitive Metallurgy: A Study on Microstructure and Energy Efficiency in High-Temperature Alloying via Sensor Fusion and Deep Reinforcement Learning
Abstract: Background Traditional high-temperature metallurgical processes, such as continuous casting and specialty alloy synthesis, are characterized by high energy consumption, stochastic variability, and reliance on post-process defect inspection. The inability to precisely monitor, model, and predict the real-time thermal, chemical, and mechanical state of molten metal and cooling substrates results in significant material waste and inconsistent microstructural integrity. Methodology This study introduces a novel framework for Cognitive Metallurgy utilizing an integrated …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 2, 2025 · pp. 27–36 Read article
-
Predictive Model to Monitor Dissolved Oxygen Deficit and Velocity Variation Influenceon Mycoplasima Transport in Choba River
Abstract: This paper expressed various impacts from oxygen and river velocity on the transport of Mycoplasima in Choba River. The study monitor the impact of these two parameters at different pointsource of waste discharge in the River, other parameterswere integrated, but were not considered significant, since there rate of impact were not determined in the study location. The two considered parameters were applied in the system to determined their direct rate …
Published in International Journal of Water Resources Engineering · Vol. 6, Issue 1, 2020 · pp. 10–20 Read article
-
Study of Durability Properties of Bagasse Ash Concrete and Its Behaviour when Exposed to Elevated Temperatures
Abstract: The major driver for the economic growth and social progress of any country is its construction sector. In India, it is estimated that construction contributes 8% to 9% to GDP and this share is likely to increase in coming years. High-performance concrete made from ordinary Portland cement (OPC) and various supplementary cementitious materials (SCM) are alarmingly finding their use in construction worldwide. Bagasse ash (BA), one such SCM, the agro-industrial …
Published in International Journal of Construction Engineering and Planning · Vol. 8, Issue 2, 2022 · pp. 51–62 Read article
-
Heavy metal concentrations in two mangrove species grown in the UAE region and use of phytoremediation technology
Abstract: The mangrove vegetation of Eastern region of UAE, rhizosphere root, leaf, stem and soil sediments of two mangrove types studied for the levels of Cr, Cu, Cd, Mn, Ni, Zn and Pb in the eastern Emirates region. The analysis was carried out with FAAS spectroscopy using microwave digestion technique. The two mangrove plants are most abundant in this region. the bioconcentration factor (BCF) > 1 metal content was quantized. It …
Published in International Journal of Green Chemistry · Vol. 5, Issue 2, 2019 · pp. 1–8 Read article
-
To Study the Effects on Mechanical Properties ofConcrete by Partial Replacement of Sand with MetallicSwarf
Abstract: Abstract The utilization of metallic swarf in concrete manufacturing is increasing in importance due to its environmental and economic benefits. However, the mechanical qualities of such concrete frequently appear inferior to regular concrete. To improve the mechanical characteristics of standard concrete, numerous additives have been researched, but the utilization of metallic swarf remains a mystery. This research investigates the recycling of waste metallic swarf produced in the automobile industry and …
Published in International Journal of Mechanics and Design · Vol. 11, Issue 1, 2025 · pp. 54–60 Read article
-
Effect of Compression Pressure on the Strength and Fuel Properties of Maize Cob Briquettes
Abstract: Biomass can be densified under a high compression pressure or a low compression pressure. The type of raw material, moisture level, particle size, and form typically all influence how much pressure should be used. This study utilized maize cobs and waste paper pulp to produce briquettes which are seen as alternative fuels. The goal was to determine how compression pressure affected the strength and fuel characteristics of the briquettes that …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 8, Issue 1, 2022 · pp. 16–24 Read article
-
SOCIO-ECONOMIC IMPACT AND ENVIRONMENTAL HAZARDS OF OIL PALM MILL INDUSTRY ON THE RESIDENTS IN DARU AND YENGEMA, JAWI CHIEFDOM, KAILAHUN DISTRICT SIERRA LEONE
Abstract: The oil palm industry's socioeconomic impact and risk to human health evaluation were quantitative and descriptive cross-sectional studies to determine the oil palm industry's socioeconomic influence on local communities and risk to human health in the surrounding area. The two residents of the study site were chosen at random. The study included 51 respondents in total. Questionnaires and key informant interviews were used to generate the results. The outcomes of …
Published in International Journal of Environmental Chemistry · Vol. 9, Issue 1, 2023 · pp. 24–33 Read article
-
Some Thermal Properties of Banana (Musa acuminata) Peels Bonded Waterlily (Nymphaea lotus Linn.) Briquettes
Abstract: The purpose of the study was to determine how the amount of binder affected the ignition time and rate of burning of fuel briquettes made from a blend of banana (Musa acuminata) and waterlily (Nymphaea lotus Linn.) peels at varying binder ratios (0, 20, 40, 60, and 80% by weight of each feedstock). Before the briquettes were expelled for additional research, the homogenous feedstock was compressed by a hydraulic press …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 11, Issue 1, 2025 Read article
-
Generating Fuel from Plastic: Recent Report
Abstract: Plastics have become a part of our daily lives rom packaging, to bags and soda bottles. They are not only unsafe but their increased accumulation can cause big effects on our environment. Plastic products are found almost everywhere clogging the waterways, oceans, forests, and other natural habitats that have animals who mistake harmful plastic products for food. They constitute nearly 10 % of daily discarded waste. The problem is that …
Published in International Journal of Analytical and Applied Chemistry · Vol. 2, Issue 1, 2016 · pp. 35 Read article
-
The essence of Nanotechnology; Nanoparticles and cutting edge applications in Molecular electronics and Molecular medicine
Abstract: In this paper, the essence of nanotechnology is presented. Nanotechnology is emerged as a fabrication method, computational tools, and revolutionized electronics and medicine. The bio-chemo-physical properties are understood in different dimension with emphasis on various synthesis techniques and size dependent physio-chemical properties. Most properties resulting from size reduction from macro scale to nanoscale and molecular interactions with nanoparticles significantly contributes to its multi function. A systematic illustration of nanotechnology at …
Published in International Journal of Applied Nanotechnology · Vol. 10, Issue 1, 2024 Read article
-
Experimental Study of Concrete Using Crumb Rubber with Partial Replacement of Fine Aggregates
Abstract: The cost effective About one crore 10 lakhs all types of new vehicles are added all year to the Indian roads. The increase of about three crores discarded tyres each year stance a potential threat to the environment. The greatest way to overcome this problem is to catch alternative aggregates for construction. The proposed work presents an investigational study of result of use of solid waste material (crumb rubber) in …
Published in International Journal of Structural Engineering and Analysis · Vol. 4, Issue 1, 2018 · pp. 31–35 Read article
-
Study on Preparation and Properties of Agro-waste Particleboard at Various Press Temperatures
Abstract: This study concerns the influence of temperature on changes in physical and mechanical properties of particleboard fabricated from betel nut (Areca catechu L) fiber (Agro-waste) and urea-formaldehyde adhesive during hot-pressing with multiple press temperatures (120, 130, 140, 150 and 160°C) at 15 minutes. The physical and mechanical properties of particleboards were determined by British Standard (BS-1811) and Indian Standard (IS-3087) Methods. For some physical and mechanical properties, it appears that …
Published in International Journal of Composite and Constituent Materials · Vol. 7, Issue 1, 2021 · pp. 40–47 Read article