Search
996 articles for “experimental”
-
Utilization of Advance Geopolymer in Concrete: A Review
Abstract: Climate change has several adverse impacts like changes in weather, untimely rains, depleting water, droughts, flash floods, acute and early summer and chilling winter. Equally, another bigger challenge to the society is foul smell whether it is river, pond, drain, public toilets or garbage dump yards. It is due to emission of hydrogen sulphide, methane and other toxic gases. Methane in pure form does not create any foul smell, however …
Published in International Journal of Construction Engineering and Planning · Vol. 7, Issue 2, 2021 · pp. 21–28 Read article
-
Mathematical Model to Monitor Concrete Compressive Strength Partially Replaced with Periwinkle and Palm Kernel Shell as Aggregate
Abstract: This research work monitor that application of periwinkle and palm kernel shell as partial replacement for aggregate, the study are carried out applying modeling and simulation techniques, concrete are normally heterogeneous in most cases, but the study try to examine the growth rate of the material on their compressive strength, such process were carried out using these two locally sourced material at different percentage of replacement for aggregate, the study …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 2, 2023 · pp. 6–28 Read article
-
Review on the Performance of Fibre and Industrial Slag in Concrete
Abstract: This review paper discusses about the different types of fibre used in concrete at different periods with the mix parameter details. This review enlightens the effect of industrial waste such as Bottom ash, Copper slag, Ferro-chromium slag, Ground granulated blast furnace slag (GGBFS), Steel slag, Stainless steel slag as a substitute in concrete. The elaborate study on its chemical composition and also the merits and demerits of using the slag …
Published in International Journal of Concrete Technology · Vol. 1, Issue 1, 2015 · pp. 16–30 Read article
-
Prediction of Compressive Strength of Concrete with Decision Trees
Abstract: In the past few researchers predicted the compressive strength of concrete from its ingredients employing data driven technique like artificial neural network (ANN) and Decision Tree (DT). For Indian concrete records, only one study was available which had employed ANN for prediction. Evaluation of different performance metrics indicated that there was scope of improvement in the prediction performance. In this paper experimental data from the literature was utilized for development …
Published in International Journal of Concrete Technology · Vol. 2, Issue 1, 2016 · pp. 19–29 Read article
-
Use of Recycled Aggregates in Concrete to Achieve Characteristic Strength M50 with Addition to Steel Fibre
Abstract: Concrete is World’s second most consumed material after water, use of recycled aggregate (RA) in concrete can be useful for environmental protection. Recycled aggregates are the materials for the future. Aggregate is one of the main ingredients in producing concrete. It covers 75% of the total for any concrete mix. The strength of the concrete depends on the properties of aggregates used. The experimental analysis comprise with normal RAC and …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 1–8 Read article
-
Effect of Colloidal Nanosilica on High Strength Rice Husk Ash Concrete
Abstract: Nowadays, supplementary cementitious materials (SCMs) are used in concrete because it reduces CO2 emission during. The husks, which are production of cement, reduces cement contents, improve workability, increase strength and enhance durability. Pozzolanic reaction takes place when siliceous or aluminous material comes in contact with calcium hydroxide in the presence of moisture to form compounds possessing cementitious properties approximately 50 percent cellulose, 30 percent lignin and 20 percent silica, are …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 33–43 Read article
-
Utilization of Waste Plastics as a Fiber in Concrete
Abstract: The rapid urbanization and industrialization all over the world has resulted in large deposition of plastic waste. Disposal of plastic waste in an environment is considered to be big hazard due to its very low biodegradability and presence in large quantities. In order to minimize the problem, the proposed concrete which is made by adding plastics in concrete may help to reuse the plastics and to study the properties of …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 56–60 Read article
-
Study on Partial Replacement of Cement by Bagasse Ash in Cement Concrete
Abstract: Today, researchers all over the world are trying to utilize agricultural wastes like corncob ash, rice husk ash, bagasse ash as a partial replacement of cement, thereby reducing cement production and greenhouse gases emissions. Sugarcane bagasse is a fibrous waste product of sugarcane refining industry and being disposed to open landfills causing serious environmental impacts. In this study, Bagasse ash was partially replaced in the ratio of 0%, 5%, 10%, …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 29–35 Read article
-
A parametric study for the behaviour of steel plate-anchor assembly embedded in concrete under cyclic loading
Abstract: Steel plate-anchor assembly embedded in concrete is a common type of connection system used for connecting structural steel members to concrete members. These assemblies are subjected to different loading cases depending on their use. Since the behaviour of such assemblies is quite complex and depends on a number of factors associated with different components, it was decided to adopt finite-element technique to obtain a reasonably accurate analytical solution for the …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 21–36 Read article
-
TO IMPROVE THE EFFICIENCY OF SILICA FUME CONCRETE
Abstract: A suitable introduction of silica fume in concrete improves both the mechanical and chemical properties of the concrete. The long-live compressive strength of silica-fume concrete has been recently questioned by some researchers and they were regular in touch of it.This paper reports the results of compressive strength data on strength of silica which is on 4- to 6-year-old cores attained from well-documented field experiments which where both silica-fume and non-silica …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 39–44 Read article
-
Effect of Steel Slag and Quarry Dust on the Flexural Strength of Concrete
Abstract: The effect of quarry dust and steel slag on the flexural strength of concrete has been experimentally studied and reported in this paper. Concrete used was prepared by replacing 75% of steel slag in replacement with sand and replacing cement by 5%, 10%, 15% and 20% with quarry dust. Also, conventional concrete was prepared as reference concrete for comparison. 100-mm cube and 100 mm × 100 mm × 500 mm …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 8–13 Read article
-
Compressive Behaviour of Lightweight Aggregate Concrete by Blending LECA
Abstract: Present work deals with the lightweight aggregate concrete (LWAC) by using Lightweight Expanded Clay Aggregate (LECA) as lightweight aggregate, LECA is used as replacement to the natural coarse aggregate in the concrete, in this experimental work percentage of lightweight aggregates are varied to study the change in the properties of concrete made by blending LECA. LECA content was varied from 20% to 100% at an increment of 20%. Total 6 …
Published in International Journal of Concrete Technology · Vol. 5, Issue 2, 2019 · pp. 10–15 Read article
-
Prediction of Compressive strength of Periwinkle Shell Aggregate Concrete Using a Quadratic Polynomial Function
Abstract: In this study, a mathematical model is developed to predict the compressive strength of normal concrete made with periwinkle shell as coarse aggregate using a quadratic polynomial function. The response function is expressed as a multivariable function of the proportions of the component materials (water, ordinary Portland cement, sand and periwinkle shell). A total of thirty experimental runs were used to demonstrate the applicability of the mathematical model developed. The …
Published in International Journal of Concrete Technology · Vol. 6, Issue 2, 2020 · pp. 10–21 Read article
-
An Investigation on Aggregate Distribution in Concrete
Abstract: Falling behavior is generally studied by mathematicians. The first study is conducted by Comte de Buffon with name “Falling needles experiment” and is widely known. Buffon researched the falling needle behavior finding the fall of needles in relation with Pi. However, although aggregates are fallen to the mould in cement paste, falling behaviour of concrete is rarely studied considering the statistical parameters of the fall.Accordingly, an experimental study is conducted …
Published in International Journal of Concrete Technology · Vol. 7, Issue 2, 2021 · pp. 1–8 Read article
-
Manufacturing of interlocking brick with cement- lime mortar and hyposludge
Abstract: Lime is still a valuable building material that is frequently used in construction as lime mortar. Hydrated lime can be added to concrete mixes used to make blocks and other concrete products. Sugarcane mud, also characterized as filter cake, is a byproduct of the sugar purification process. The introduction of these components into the environment pollutes it. There have been several attempts to address these difficulties. A experiment of manufacturing …
Published in International Journal of Concrete Technology · Vol. 8, Issue 2, 2022 · pp. 1–7 Read article
-
DETAILED STUDY ON THE PROPERTIES OF PLASTIC CONCRETE CUTOFF WALL MATERIALS MIXED WITH WATERPROOFING ADMIXTURES
Abstract: This study presents the results of a comprehensive experimental work performed to characterize the mechanical and hydraulic properties of plastic concrete materials added with water-resisting and crystalline admixture as Permeability Reducing Admixture for Hydrostatic conditions (PRAH). The mechanical properties, deformation, permeability nature, triaxial stress-strain curve, hydration products, phase composition, and pore structure of plastic concrete with various proportions of PRAH were investigated. In addition to that, retarding admixture was used …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 1–15 Read article
-
Modeling 28 Days’ Curing Compressive Strength of Concrete Partially Replaced with Palm Kernel Shell as Aggregate Influenced by Porosity
Abstract: Twenty-eight days of curing to determine compressive strength of concrete were carried out throughthe application of modeling and simulation. The development of concrete compressive strength wascarried out by integrating palm kernel shell (PKS) as partial replacement for aggregate. Studies weremonitored to determine its rates of strength development by partially replacing PKS at differentpercentage of 5%, 10%, 15%, 20%, and 25% to determine the optimum compressive strength withinthe applied percentage of …
Published in International Journal of Concrete Technology · Vol. 9, Issue 2, 2023 · pp. 26–40 Read article
-
Effect of Varying Shear Velocity on the Mechanical Behavior of Jointed Rock Subjected To Lower Normal Load
Abstract: : This study investigates the effect of shearing velocity on the mechanical behavior of rock joints, namely, the shear strength, residual strength, joint dilation, its surface roughness and the shearing stiffness under the application of lower normal load. The slower rate of shearing plays an important role in creep and the fatigue effect on jointed rock masses whereas, higher rate of shearing is experienced in the cases of dynamic loadings …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 2, Issue 1, 2016 · pp. 1–11 Read article
-
Condition Assessment of Structures Using Vibration Technique
Abstract: Structural Health Monitoring grasps the Promise for enhancing the structural performance with an outstanding cost/benefit ratio. Condition assessment is a technique used in health monitoring in the damage detection, to ensure the serviceability and the durability of the structures. In the present report, condition assessment of the structures using low frequency technique is being completed through experimental modal analysis and computational analysis software ANSYS 9.0 over structural elements beam and …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 1, 2017 · pp. 36–46 Read article
-
Optimization of Compressive Strength of Segmental Interlocking Stones
Abstract: The failure of most segmental interlocking stones used as pavement materials is traceable to lack of knowledge of the mix ratios that would optimize the compressive strength of the end products. In this study, the compressive strength was optimized based on Scheffe’s simplex lattice approach. The reliability of model developed was investigated using F-statistic and was found to be adequate. A computer program written in basic language was used to …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 4, Issue 2, 2018 · pp. 1–7 Read article