Search
1067 articles for “Investigation”
-
Correlation Between CBR Values and Index Properties of Soils
Abstract: Presently India’s infrastructure is growing rapidly. Large number of new urban and lightly trafficked roads are being constructed or planned. The California bearing ratio (CBR) is the well known, common and trustful test currently used in road construction. The CBR values are used by the engineers to design the thickness of pavement layer to be laid on the top of the sub-grade. Laboratory tests like consistency tests, standard proctor test …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 2, 2017 · pp. 18–21 Read article
-
Study on the Effects of Polypropylene Fiber in Concrete Paver Blocks
Abstract: Road transportation is the lifeline of the nation and its development is a crucial concern. The traditional bituminous pavement needs the continuous maintenance and rehabilitation operations, which ultimately leads to the scope for cement concrete pavements. This paper highlights the effects of polypropylene fibers in concrete paver blocks, which is a recent advancement in the field of reinforced concrete pavement design. Concrete paver blocks prepared for M30 grade and the …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 2, 2017 · pp. 32–38 Read article
-
Strength and Durability Characteristics of Stabilized Compressed Laterite Soil Bricks
Abstract: In this experimental investigation the required numbers of test bricks were moulded for the various percentage proportionate of laterite soil, such as, 91%, 90%, 89%, and 88%, stabilized with various percentage of cement stabilizer viz 4, 5, 6 and 7%, respectively, along with 5% addition of sand constantly; compacted with a hydraulic press paver block and brick making machine. Based on the obtained results laterite soil bricks can be used …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 1, 2018 · pp. 58–64 Read article
-
Determination of the optimum magnetic exposure time for magnetic water concrete
Abstract: The purpose of this study was to investigate the effect of magnetic water on the workability and compressive strength of concrete, and also to find the optimum time for exposing water to magnetic field, for which maximum compressive strength of concrete will be achieved. In this research, water was exposed to magnetic field of 336mT per magnet for a duration of 12, 18, 24, 36, and 96 hours, after which …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 1, 2020 · pp. 34–42 Read article
-
Impact of Sugarcane Molasses on Compressive Strength and Workability
Abstract: Molasses used as admixture increase the workability, it is a by-product of sugar industry. In this study, mechanical property such as compressive strength and workability of concrete adding fly ash and sugarcane molasses has been investigated. Adding the molasses in concrete increase the compressive strength, delay the initial and final setting time, reduced the bleeding and segregation of concrete and decrease the W/C ratio. The compressive strength test results showed …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 1, 2020 · pp. 1–5 Read article
-
Utilization of Advance Geopolymer in Concrete: A Review
Abstract: Climate change has several adverse impacts like changes in weather, untimely rains, depleting water, droughts, flash floods, acute and early summer and chilling winter. Equally, another bigger challenge to the society is foul smell whether it is river, pond, drain, public toilets or garbage dump yards. It is due to emission of hydrogen sulphide, methane and other toxic gases. Methane in pure form does not create any foul smell, however …
Published in International Journal of Construction Engineering and Planning · Vol. 7, Issue 2, 2021 · pp. 21–28 Read article
-
THE ARBITRATION AND CONCILIATION ACT OF 1996 AND 2019 OF INDIA- COMPARATIVE STUDY
Abstract: The settlement undertaken by panel of one or more persons in case of disputes is called arbitration and the panel called the arbitrators. These arbitrators are mutually selected by parties for the purpose of investigation and settlement of disputes. The law governing this was laid by introducing the Arbitration and Conciliation Act 1996. With time many questions were raised in reference to the adequacy of the act in quick settlement …
Published in International Journal of Construction Engineering and Planning · Vol. 8, Issue 1, 2022 · pp. 23–31 Read article
-
Individual and Combined Effects of Lead Rubber Bearing and Fluid Viscous Damper Techniques on Seismic Response of Irregular Reinforced Concrete Buildings
Abstract: Most old structures that do not meet current seismic regulations may sustain significant damage or perhaps collapse as a result of an earthquake. The seismic enhancement could potentially help people survive a major earthquake. Since earthquake engineering began, not only in India but also in other nations, earthquake-resistant construction of reinforced concrete buildings has been a constant topic of research. Buildings are still being damaged as a result of earthquakes. …
Published in International Journal of Construction Engineering and Planning · Vol. 8, Issue 2, 2022 · pp. 17–28 Read article
-
Risk Map For Delay Causes in Construction Projects in Palestine: Contractors' Perspective
Abstract: This study is conducted to identify the main risks in construction projects in Palestine from contractors’ perspective. Questionnaire survey is the tool used to achieve the objectives of the study. 41 critical risk factors in projects associated with project duration were identified and classified as external and internal factors. The risk map for the investigated causes created based on their perceived severity and frequency of occurrence. The findings reveaeled 29 …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 1, 2023 · pp. 46–56 Read article
-
A Review- State of Art on Hot Weather Concreting and Rheology of Cement-Based Materials
Abstract: The objective of this paper is to explore the important mechanisms that control the rheology of cement based materials under hot weather conditions. The effect of hot weather on the fresh and mechanical properties of concrete was investigated. The paper presents some of the practices taken to alleviate the effects of hot weather on concreting. The rheological properties of Portland cement paste and concrete were discussed using both the conventional …
Published in International Journal of Concrete Technology · Vol. 1, Issue 1, 2015 · pp. 49–62 Read article
-
Abrasion resistance, compressive strength and elasticity modulus of recycled aggregate concrete (RAC) included lower quality recycled aggregate with and without silica fume
Abstract: The usage of recycled aggregate (RA) for concrete works is spreading for gaining wide acceptance around the world, and total amount of RA utilized in concrete industry increases day-by-day. RA is used in many concrete products, such as concrete interlocking blocks, pavements, etc. One of the physical causes of concrete deterioration is surface wear or loss of mass for concrete products which are especially exposed to vehicular traffic (i.e., industrial …
Published in International Journal of Concrete Technology · Vol. 2, Issue 1, 2016 · pp. 1–18 Read article
-
Tensile Strain Reduction in Asphalt Concrete Mixtures through Rubberization at the Asphalt Bound – Subgrade Layer Interface
Abstract: Tensile strains are major contributors in determining the fatigue life of asphalt concrete pavement because they are responsible for fatigue cracking. Therefore, knowledge of strains and their role is of vital importance to the Highway Engineer. However, the focus of the present study was to investigate measures by which these damage contributing factor – “tensile strain” could be reduced at the interface of the asphalt concrete – subgrade layer. The …
Published in International Journal of Concrete Technology · Vol. 2, Issue 1, 2016 · pp. 44–53 Read article
-
Effect of Elevated Temperature on Compressive Strength and Flexural Strength of Fiber Reinforced Concrete
Abstract: Now a day concrete is being used extensively in the construction that might be subjected to elevated temperatures. The behavior of concrete structures at elevated temperatures is significant importance in predicting the safety of structures in response to certain accidents or particular service conditions. This paper deals with the mechanical properties of concrete with steel fibers subjected to temperatures up to 500°C. The specimens were kept in oven for 1 …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 19–32 Read article
-
Improving Durability of Asphalt Pavement Wearing Course Submerged in Water Using Candle Wax as Water Proofing Agent: An Assessment Using RSI, FDI and SDI
Abstract: Asphalt pavements are designed and constructed to meet mostly stability and durability requirements during its design life. However, durability of asphalt pavements also heavily depends on other physical parameters as good drainage facility apart from having good material mix and structural designs. In the wake of asphalt pavements not supported by good drainage measures it is very likely that these pavements will fail sooner than later. On this basis, the …
Published in International Journal of Concrete Technology · Vol. 3, Issue 2, 2017 · pp. 1–10 Read article
-
Empirical Model Relativity of Flexural and Compressive Strength of Concrete Produced with Foundry Waste Sand as Partial Replacement
Abstract: The evaluation presented in this research is to establish the correlation between compressive strength of concrete and flexural strength of concrete of grade 20 at mix ratio of 1:2:4 produced using foundry waste sand as a partial replacement for river sand at different replacement level of 0%, 5%, 10%, 15%, 20% and 25%. The aimed compressive strength was achieved at 15% replacement and the corresponding flexural strength of 3.14 N/mm2was …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 5–10 Read article
-
Suitability of Concrete Containing Fly Ash Along with Alccofine
Abstract: With the growing urbanization and rising standard of living and purchasing power of men the demand of concrete does not look to become dormant. But due to limited supply of non-renewable constituents of concrete they are needed to be preserved for the future generation, so there is utmost necessity of using supplementary waste materials in concrete. With advancement in science and technology itis made possible that the waste materials like …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 15–20 Read article
-
Experimental Study of Mechanical Properties Geopolymer Concrete.
Abstract: This experimental study aimed to define the parameters for optimum mix design of geopolymer concrete made by partial replacement of cement. The geopolymer concrete is nothing but the formation of fly ash and alkali activators. Fly ash is the waste product from the thermal power station and may use as the pozzolanic material. But, only fly ash is may not the only replacement for the cement, for the more binding …
Published in International Journal of Concrete Technology · Vol. 5, Issue 2, 2019 · pp. 16–22 Read article
-
Effect on Strength Properties Concrete Amalgamation of Recycled Reinforced Aggregate -An Experimental Study
Abstract: Concrete is a combination substance which has turn into a universal and essential as its intrinsic in character brought an uprising application. Use of concrete in construction lead to construction of surplus desecrate subsequent to destruction of the variety of structures. The waste generated is enormous and uncontrollable. So, in this present research is to verify the potency of concrete with normal aggregate and recycled aggregate in addition to enlarged …
Published in International Journal of Concrete Technology · Vol. 6, Issue 1, 2020 · pp. 7–15 Read article
-
Strength & Durability of Concrete with Sand Blasting Residue
Abstract: Sand blasting residue (SBR) is commonly obtained as a by-product from chain manufacturing industries. Although it is a waste material but can be used in the mixing of concrete. The work has been divided into two parts. Part 1 covers preparation of M20concreteby substituting SBR as replacement of sand in different percentage such as 40%, 50%, 60%, 70% & 80%. The w/c ratio is kept as 0.5 with adequate does …
Published in International Journal of Concrete Technology · Vol. 6, Issue 1, 2020 · pp. 32–41 Read article
-
Study the Behavior of Single cell Rectangular box girder bridge with the help of AASHTO and IRC loadings
Abstract: Generally bridge carries a road or railway across natural or artificial obstacles such as river, canalor another railway or another road. Bridge construction is one of the difficult traffic infrastructureconstructions. The structural method of different girder bridge having no of girder. The modeling andanalysis of bridge structure is little bit more time consuming and costly as compared to othersstructure. In this paper present an investigation into behaviors like displacement bending …
Published in International Journal of Concrete Technology · Vol. 7, Issue 1, 2021 · pp. 1–6 Read article