Search
106 articles for “Finite Element Analysis”
-
Generative Lightweighting of Actuator-Integrated Robotic Structures Under Decentralized Additive Manufacturing Constraints
Abstract: This study presents the implementation and structural validation of a constraint-driven generative design methodology for the development of lightweight actuator-integrated robotic components fabricated using decentralized additive manufacturing. Building upon a previously formalized constraint-driven framework, the method was applied to the synthesis of a modular robotic link representative of actuator-integrated structural elements commonly used in legged robotic systems. The baseline component was defined to preserve critical functional interfaces, including actuator mounting …
Published in International Journal of Mechanics and Design · Vol. 12, Issue 1, 2026 · pp. 44–60 Read article
-
Hybrid ABS & CF-ABS FDM Printing Tensile Components: A Comprehensive Review and a Novel Taguchi–FEA Based Methodology Framework for Mechanical Optimization
Abstract: Abstract An experimental–numerical strategy and a critical literature survey were addressed to tackle the tensile response of hybrid Acrylonitrile Butadiene Styrene (ABS) and Carbon Fiber–reinforced ABS (CF-ABS) parts manufactured by Fused Deposition Modeling (FDM). The study employed a systematic literature synthesis to identify material challenges, reinforcement compromises and important process parameters that impact anisotropy as well as interlayer bonding. Dual-material tensile samples based on an Automatic Material System (AMS) printer …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 1, 2026 · pp. 1–27 Read article
-
Hybrid ABS & CF-ABS FDM Printing Tensile Components: A Comprehensive Review and a Novel Taguchi–FEA Based Methodology Framework for Mechanical Optimization
Abstract: Abstract An experimental–numerical strategy and a critical literature survey were addressed to tackle the tensile response of hybrid Acrylonitrile Butadiene Styrene (ABS) and Carbon Fiber–reinforced ABS (CF-ABS) parts manufactured by Fused Deposition Modeling (FDM). The study employed a systematic literature synthesis to identify material challenges, reinforcement compromises and important process parameters that impact anisotropy as well as interlayer bonding. Dual-material tensile samples based on an Automatic Material System (AMS) printer …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 1, 2026 · pp. 1–5 Read article
-
A Study of 3D Printing Technology and M.L. Algorithms for Enhanced Production
Abstract: Abstract The realm of 3D printing technology, also referred to as additive manufacturing, has garnered increasing interest in recent times due to its capacity to construct intricate geometric structures. Fused deposition modeling (FDM) stands out among the various techniques and has gained widespread adoption. However, achieving optimal outcomes with FDM poses a challenge, necessitating meticulous selection of process parameters. Presently, many methodologies rely on Machine Learning (ML) algorithms akin to …
Published in International Journal of Computer Aided Manufacturing · Vol. 11, Issue 1, 2025 · pp. 6–15 Read article
-
Design and Optimization of Gas Turbine Blades for High-Temperature Operations
Abstract: Abstract The design and optimization of gas turbine blades for high-temperature operations are critical to enhancing the efficiency and reliability of power generation and propulsion systems. These components operate under extreme conditions of heat, pressure, and mechanical stress, making their performance pivotal to the overall effectiveness of turbines. This study explores the key factors influencing blade performance, emphasizing the importance of material selection, thermal barrier coatings, aerodynamic design, cooling mechanisms, …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 10, Issue 2, 2024 · pp. 22–27 Read article
-
A Review on Surface Error Compensation in Thin-Walled Component Machining
Abstract: *Author for CorrespondenceManikandan HareendranE-mail: [email protected] 1,4,5,6Associate Professor, Department of Mechanical Engineering, Mangalam College of Engineering (APJAKTU), Kottayam, Kerala, India2,3Assistant Professor, Department of Mechanical Engineering, Mangalam College of Engineering (APJAKTU), Kottayam, Kerala, India7Professor, Department of Mechanical Engineering, Mangalam College of Engineering (APJAKTU), Kottayam, Kerala, India Received Date: November 12, 2024Accepted Date: November 14, 2024Published Date: November 22, 2024 Citation: Rajeeve K. Mohana, Santhu Varghese Thomas, Rahul Krishnan, Johan George Cherian, Navish …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 10, Issue 2, 2024 · pp. 1–11 Read article
-
Optimizing Robotic Arm Performance: A Finite ElementAnalysis Comparison to Nylon, PLA, and ABS
Abstract: This paper analyzes the mechanical behavior of three materials used in robotic arms: Nylon, PLA, and ABS, with an emphasis on three important parameters: total deformation and equivalent stress in different conditions of loading. In this regard, a finite element analysis was applied via the ANSYS software to simulate structural stiffness as well as their resistance against stress that these materials undergo when strengthened with steel reinforcements. The investigation shows …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 10, Issue 2, 2024 · pp. 1–12 Read article
-
Effect of Opening Shapes and Sizes on the Gravity Dam
Abstract: Design of gravity dams is an important issue in dam engineering. Opening in the dam plays a vital role in the failure of the gravity dam. In the present work finite element analysis of the gravity dam for different opening shapes and sizes are studied. Koyna dam is considered for the analysis. Study of stress concentration and deformation generated in the dam is conducted in the present work. Two different …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 2, 2017 · pp. 1–8 Read article
-
Optimization of 3D Printed Two-wheeler Suspension System
Abstract: The suspension is the very important criteria of a two-wheeler in order to improve the comfort for the operator or rider of the two-wheeler. In most of the two-wheeler’s shock absorbers are used as a suspension system to smooth out or damp shock impulse and dissipate energy by use of spring’s compression and relaxation property. The system consists of a spring which allows the frame and vehicle intact while riding …
Published in International Journal of Analog Integrated Circuits · Vol. 4, Issue 2, 2018 · pp. 51–57 Read article
-
Failure Prediction of Composite Lamina
Abstract: Composite materials are preferable in many applications of engineering than their metallic equivalent. These materials provide desirable characteristics and required properties for specific design and testing. In orthotropic fiber composites, the fiber orientation dictates the material properties, because the properties can be built into the laminate during fabrication. In this study, a composite laminate is tested with a specific configuration whether it would fail or survive under specific load. If …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 27–36 Read article
-
Investigation On Behavior Of Cold Formed Steel In Beam Column Connections
Abstract: Cold form steel structures are used for numerous purposes in construction industry. An attempt has been made in this study to check the behavior of beam column connections by using self-tapered screw in cold form steel section theoretical, experimentally and analytically. Finally, the experimental results are compared with analytical results. This study aims at the following objective by test performed on cold formed steel section to check the behavior connections. …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 2, Issue 1, 2016 · pp. 66–70 Read article
-
Optimisation of Ratio of Center Distance of Adjacent Hole to Diameter of Pre-stressed Holes by FEA
Abstract: Residual compressive stress zone around a fastener hole is introduced by a process called pre-stressing. This is being done to reduce adverse effect of cyclic tensile stress and to restrict the fatigue crack growth due to material flaws or imperfect surfaces. The objective of this investigation is to optimize the inter-hole distance between adjacent cold expanded holes on a plate restricting the deformation of material between holes to the elastic …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 2, 2020 · pp. 40–48 Read article
-
Assumptions, Limitations and Applications of Bernoulli’s Equation
Abstract: The Euler-Bernoulli beam theory, also called “beam theory”, is a condensed version of the linearisotropic theory of elasticity and can be used to predict the load-carrying and deflection properties ofbeams. It was initially stated around the year 1750, but it was not widely used until the Eiffel Towerand the Ferris Wheel were built in the late 19th century. It immediately became an engineering pillarand a catalyst for the Second Industrial …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 8, Issue 1, 2022 · pp. 15–18 Read article
-
Nonlinear Pushover Analysis of RC Frame Considering SSI Effect: A Review
Abstract: It is the need of modern era to go for the safe, reliable and economic structure design with special reference to seismic response of the structure. The classical methods which are based on elastic analysis are not able to predict the structural behaviour under the seismic forces. On the other hand the Pushover Analysis (POA) gives more reliable results. The POA is a static –nonlinear analysis. In this method the …
Published in International Journal of Structural Engineering and Analysis · Vol. 6, Issue 2, 2020 · pp. 21–25 Read article
-
Calculate the natural frequencies with Cracked for Hybrid Unidirectional Composite Plate
Abstract: A mathematical model was built by using ANSYS (2D, 3D) models and MATLAB to represent composite materials. The natural frequencies were calculated for type of composite plates with of boundary conditions clamped from each edge (CCCC). In the vibration analysis, the finite element and MATLAB results showed there was an increase in the first, second and third natural frequencies by increasing the volumetric fraction of the fiber.In the cracked plate, …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 1, 2020 · pp. 5–16 Read article
-
Analyze Effect Of Skew Angle On Performance of R.C Girder Bridge Deck
Abstract: Abstract - The performance of reinforced c oncrete (R.C) girder bridge decks is significantly influenced by geometric configurations, among which the skew angle plays a critical role. Skewed bridges are commonly employed to accommodate site constraints, road alignment, and river crossings, but they introduce complex stress distributions, torsional effects, and differential deflections compared to straight bridges. This study investigates the effect of varying skew angles on the structural behavior of …
Published in International Journal of Structural Engineering and Analysis · Vol. 12, Issue 1, 2026 Read article
-
Seepage and Slope Stability Analysis of Earthen Dam: A Case Study of Lebu Dam, Ethiopia
Abstract: Seepage and Slope stability are a matter of remarkable concern in the construction of earthen dams where the failure of slopes may incur a severe loss of life and damage to property. The most important factors that cause instability of slope and lead to failure are gravitational force, the force due to seepage of water, sudden lowering of water adjacent to a slope and force due to earthquake. This study …
Published in International Journal of Water Resources Engineering · Vol. 7, Issue 1, 2021 · pp. 52–70 Read article
-
Design of Multistoryed Building Using STAAD Pro
Abstract: The chief aim of the current project is to analyze and design a multi-storeyed building [G +5 (3d frame)] using STAAD ProV8i. The design deals with the calculation of the load manually and analysis of the structure is done by STAAD Pro software. The method of design used by STAAD pro as per Indian code is Limit State Design. STAAD.Pro features a state-of-the-art user interface, visualization tools, with advanced finite …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 3, Issue 1, 2017 · pp. 7–16 Read article
-
Vibration Analysis of Steel Deck due to Moving Load Using ANSYS.
Abstract: Most anthropological goings-on take in vibration in one arrangement or further. For illustration, we receive for our eardrums vibrate and see because light waves undergo vibration. Breathing is associated with the vibration of lungs and walking involves (periodic) oscillatory motion of legs and hands. Human speech requires the oscillatory motion of larynges (and tongues). Early scholars in the field of vibration concentrated their efforts on understanding the natural phenomena and …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 6, Issue 2, 2020 · pp. 31–40 Read article
-
FE Modelling and Analysis of Mixed Mode Delamination in Composite Laminates
Abstract: A composite is a structural material that consists of two or more constituents combined at a macroscopic level and not soluble in each other. The advantages of composites over conventional materials are its light weight, high strength, design flexibility, dimensional stability, etc. Although Composite materials are advantageous than conventional materials, there are some defects in composite materials too, which are Fibre-matrix debonding, fibre misalignment, Delamination, Matrix cracking, Impact damage, etc. …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 4, Issue 2, 2018 · pp. 31–57 Read article