Search
405 articles for “mechanical properties”
-
Multiscale Modeling of Elastic Properties Based on Micromechanics
Abstract: This paper addresses multiscale firmness homogenization procedure to separate macroscale versatile mechanical properties of four sorts of manageable cements from their nanoscale mechanical properties. Nine distinctive practical solid blends were considered. A model in light of micromechanics was utilized to homogenize the versatile properties. The solidified bond glues were homogenized by three systematic strategies in view of Self-Consistent and Mori-Tanaka plans. The proposed multiscale strategy consolidates progressed trial and scientific …
Published in International Journal of Composite and Constituent Materials · Vol. 2, Issue 2, 2016 · pp. 8–10 Read article
-
Study of Dynamic Mechanical and Thermal Properties of Poly(Ether Ether Ketone) Carbon Nanotubes
Abstract: The effect of polyetherimide (PEI) as a compatibilizing agent on the morphology, thermal, electrical and dynamic-mechanical properties of poly(ether ether ketone) (PEEK)/single-walled carbon nanotube (SWCNT) nanocomposites, has been investigated for different CNT loadings. After a pre-processing step based on ball milling and premixing under mechanical treatments in ethanol, the samples were prepared by melt extrusion. A more homogeneous distribution of the CNTs throughout the matrix is found for composites containing …
Published in International Journal of Polymer Science and Engineering · Vol. 3, Issue 1, 2017 · pp. 1–21 Read article
-
Green Adhesive—Using Glyoxalated Lignin and Hydrogenated Resin as Ecologically Safe Wood Adhesive for Interior Plywood
Abstract: Petroleum-based adhesive such as urea formaldehyde and phenol formaldehyde resin dominates adhesive market which releases formaldehyde and VOC to the environment. The purpose of this study is to develop an adhesive based on isocyanate in combination with compounds from renewable sources like lignin, protein and starch. Adhesive formulation was developed by incorporation of hydrogenated resin, corn starch/PVOH emulsion with glyoxalated lignin (GL) and evaluation properties of the adhesive with plywood …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 · pp. 23–27 Read article
-
Mechanical Characteristics of Polypropylene Composites Reinforced with Hybrid Fibers: Fabrication and Evaluation
Abstract: The goal of current research is to replace synthetic materials with natural, biodegradable, and renewable ones. A lot of study is being done on natural fiber composites because of its unique properties and environmental friendliness. Natural fibers are advantageous since they are easily accessible, manageable, and biodegradable. The goal of the current study is to evaluate the changes in the mechanical properties of polypropylene reinforced with chopped pineapple leaf and …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 2, 2023 · pp. 20–31 Read article
-
Mechanical, Thermal, and Electrical Properties of Poly(ether-ester)-Based Thermoplastic Elastomer Composites Filled with ZnO Nanoparticles
Abstract: A highly helpful technique to create novel polymeric materials with ordered and customized features is blending two or more immiscible polymers. The outstanding balance between processability and physical characteristics of thermoplastic polyester elastomers, particularly when using hydrogenated styrene–butadiene copolymer, makes them appealing materials for a variety of applications, including the automotive industry. New opportunities for tailored flexible composites with improved mechanical and chemical properties are made possible by reinforced polymers …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 10, Issue 2, 2024 · pp. 33–42 Read article
-
Production and Evaluation of Composites Made from Waste Material and Recycled Poly(Ethylene Terephthalate)
Abstract: A significant ecological concern that third-world countries are currently facing is the economically viable use of lignocellulose waste. In addition to reducing the cost of the composite, cellulosic fiber composites created from industrial waste would enable the efficient use of a waste material that is presently disposed of or burned. Recycled poly (ethylene terephthalate) was used in this work as a major phase (matrix) and industrial waste material was used …
Published in International Journal of Energetic Materials · Vol. 11, Issue 1, 2025 · pp. 1–12 Read article
-
Optimization of Process Parameters of GMAW for Penetration, Toughness and Tensile Strength by using Taguchi Method
Abstract: Aluminum and its alloys are having variety of applications in Aircraft, food processing etc. Moreover; the use of Aluminum and its alloys are increasing day by day due to its specific properties, like light weight, high strength, and excellent corrosion resistance. However; the present study is planned to analyze and optimize the aluminum weld joint characteristics like tensile strength, penetration and toughness by using Gas Metal arc welding (GMAW) welding. …
Published in International Journal of Mechanics and Design · Vol. 5, Issue 1, 2019 · pp. 1–9 Read article
-
Effect of Nano-Fillers on the Mechanical and Fracture Behavior of Polymer Composite Matrices: A Review
Abstract: The modification of polymer composite matrices through the incorporation of nano-scale fillers has become a prominent and highly effective strategy for enhancing mechanical performance, stiffness, and fracture resistance. Unlike conventional micro-scale reinforcements, nano-fillers possess exceptionally high surface area–to–volume ratios and unique physicochemical characteristics that significantly influence interfacial phenomena within the polymer matrix. Materials, such as carbon nanotubes (CNTs), graphene nanoplatelets (GNPs), nano-silica, and layered silicate nanoclays, introduce advanced toughening mechanisms …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 1, 2026 · pp. 31–36 Read article
-
Effect of Compatibilizers on Polypropylene-Based Peanut Shell Flour Composites Reinforced with Nanoclay
Abstract: The improvement of innovative ingredients is on the rise, especially in the automobile, aerospace, aviation, and construction industries. Conventional ingredients are being substituted with nanocomposite ingredients due to their excellent features. In this study, various composites based on polypropylene (PP), peanut shell flour (50 wt% PSF), and nanoclay (Cloisite 30B) were manufactured by melt mixing process followed by injection molded in the presence of maleated PP (PPM) and maleated styrene …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 8, Issue 2, 2022 · pp. 1–13 Read article
-
Importance of Mathematical Modeling (Response Surface Methodology) in Equal Channel Angular Pressing
Abstract: Severe plastic deformation is a technique for producing a deformation. Equal channel angular pressing is one of the unique methods for producing high plastic deformation in Aluminum alloys due to its quality of having the same dimensions after processing. In present work, A die was designed on the basis of a mathematical model generated by RSM. Variation in die geometry and other conditions were represented in present work. ANOVA presented …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 1, 2020 · pp. 46–54 Read article
-
Mechanical and Barrier Properties of LLDPE-LDPE Blend Film with Micro Clay
Abstract: The present study LLDPE-LDPE(50-50 wt%) were compounded with added microclay filler using silicone oil as dispersing agent by twin screw compounding. The three formulations were taken as 1%, 3%, 5% of microclay. The extruded standard has been cut into pellets by cutter. Then films were made using blown film extrusion and then tested. As the filler content increases, the flow behaviour of the film increases. Tensile strength increases upto 1% …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 38–46 Read article
-
Impact of Cryogenic Temperatures on the Mechanical and Thermal Properties of Polymers and Composites
Abstract: The development of lightweight, high-performance materials for use in cryogenic environments is crucial for advanced applications in aerospace, energy storage, and industrial sectors. This study explores the thermodynamic and mechanical behavior of fiber-reinforced polymers and composite materials under extremely low-temperature conditions. The cryogenic performance of these materials, including their thermal stress resistance and impact properties, was assessed with a focus on polymer fragility and the durability of composites at temperatures …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 10, Issue 1, 2024 · pp. 7–12 Read article
-
Study on Mechanical and Physical Properties of Wood-Plastic Nanocomposites after Fiber Surface Treatment
Abstract: Numerous composites based on high-density polyethylene (HDPE), wood flour (WF), and nanoclay (Cloisite 30B) were prepared by melt compounding followed by injection mold. This paper aims to evaluate the feasibility of using HDPE and underutilized WF as a material for the development of woodplastic composites, as well as the strengthening effect of nanoclay on them. To develop the poor interfacial interaction between the hydrophilic WF and hydrophobic HDPE matrix, as …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 2, 2022 · pp. 43–53 Read article
-
Physico-mechanical, and Biodegradation Properties of Polyethylene/Food Polysaccharide Blends
Abstract: Hydrophilic/polar and hydrophobic/non-polar materials do not blend well, which causes issues in the production of biodegradable plastic. Plasticizer (glycerol) was one of the components added to the mixture to increase compatibility between the two materials; this also made the film less brittle. The purpose of this study is to look at how different food polysaccharide contents affect the physico-mechanical, and biodegradation characteristics of novel polymeric-based bio-composite films made from low-density …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 1, 2023 · pp. 1–13 Read article
-
Mechanical and Microstructure Properties of Al and SiC Reinforced Aluminum-Based Metal Matrix Composite
Abstract: It is becoming increasingly difficult to design new technical materials that are resistant to wear damage and corrosion degradation in severe service circumstances. Unfortunately, even with crucial passive metals, like Al alloys, there is often a compromise between wear and corrosion resistance. Because of the unfavorable galvanic connection between the precipitates and the matrix, precipitates not only harden the material but also accelerate corrosion. This research established that a supersaturated …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 1, 2025 · pp. 26–43 Read article
-
Enhancing Soil Stabilization with Chitosan Biopolymer Integration
Abstract: In this work, clay soil is stabilized using a biocompatible chitosan solution derived from shrimp shell waste. The biopolymer chitosan has attracted attention in the field of geoenvironmental studies because of its possible applications in the absorption of heavy metals, the mitigation of soil erosion, and the improvement of hydraulic conductivity. However, a thorough investigation into its impact on the mechanical properties of soil has not yet been conducted. A …
Published in International Journal of Metallurgy and Alloys · Vol. 9, Issue 1, 2023 · pp. 35–56 Read article
-
Surface Modification and Performance Evaluation of Biologically Degummed Lady’s Finger Bast Fibers
Abstract: This research aims to investigate the physicomechanical characteristics of biologically degummed lady’s finger bast fiber (LFF) and to walk through the entire process of turning LFF into a commercial cellulosic fiber that can be used globally in a variety of textile applications, including carpets, oil and liquid absorption, packaging, basic textile products, coarse ornamental textile products, geo-textiles, and reinforcements in polymer matrix composites. This article describes the application of different …
Published in International Journal of Composite and Constituent Materials · Vol. 11, Issue 1, 2025 · pp. 21–34 Read article
-
Graphene and Carbon Nanotube-PLA Composite Feedstock Filament for Fused Deposition Modelling:Review
Abstract: 3D printing or AM has revolutionized the way of manufacturing by designing complex structure in atomized features which cannot be realized by conventional processing method. Many are adopting Additive Manufacturing over traditional method to manufacture sophisticate products from single or composite material. 3D printing has a demerit that the mechanical properties of product suffer. To address this problem, this study is conducted for development of improved and sustainable feedback material …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 1, 2020 · pp. 22–26 Read article
-
Surface Modification and Performance Evaluation of Biologically Degummed Lady's Finger Bast Fibers
Abstract: This research aims to investigate the physicomechanical characteristics of biologically degummed lady's finger bast fiber (LFF) and to walk through the entire process of turning LFF into a commercial cellulosic fiber that can be used globally in a variety of textile applications, including carpets, oil and liquid absorption, packaging, basic textile products, coarse ornamental textile products, geo-textiles, and reinforcements in polymer matrix composites. This article describes the application of different …
Published in International Journal of Polymer Science and Engineering · Vol. 11, Issue 1, 2025 Read article
-
A Study on Stress Analysis of Aluminum Alloy Solidified in Metallic Molds
Abstract: Abstract The casting technique is regarded as the primary manufacturing process. It has several process parameters that affect the cast structure. Mold geometry is considered one of the most important metal parameters to cast. In the current work, the influence of mold geometries on mechanical properties (deformation and stress concentration) of liquid Aluminum alloy solidified in the steel mold is assessed using ANSYS simulation software. Molds were subject to a …
Published in International Journal of Manufacturing and Materials Processing · Vol. 10, Issue 2, 2024 · pp. 10–15 Read article