Search
101 articles for “photovoltaics”
-
Enhancing Weak Grid Stability Using Grid-Forming BESS in Renewable-Dominated Power Systems
Abstract: The growing share of renewable energy sources in the energy mix, particularly photovoltaic (PV) installations, has resulted in the reduced grid inertia and system strength, thus presenting new challenges in terms of voltage and frequency stability in weak grid situations. Conventional grid-following (GFL) inverters rely on synchronizing with the grid and performing relatively poorly under specific situations such as disturbances, voltage sags, or islanding. It has been the aim of …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 12, Issue 2, 2026 Read article
-
Fault-Tolerant Modular Power Converter for Large-Scale Renewable Energy Integration
Abstract: The rapid expansion of large-scale renewable energy systems has significantly increased the demand for highly reliable and fault-resilient power electronic converters capable of maintaining stable grid operation under component failures and fluctuating renewable power generation. This paper proposes a Fault-Tolerant Modular Power Converter (FTMPC) for large-scale renewable energy integration, incorporating a modular multilevel architecture, intelligent fault diagnosis, and adaptive reconfiguration control to ensure uninterrupted power conversion. The proposed converter continuously …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 12, Issue 2, 2026 Read article
-
Entropy and Efficiency: Thermodynamic Insights into Sustainable Energy Technologies
Abstract: The transition toward sustainable energy systems requires a deeper understanding of the thermodynamic principles that govern energy conversion and utilization. Entropy and efficiency are central to this discussion, as they define the limits of performance and highlight the irreversibility inherent in real processes. This paper examines the role of entropy generation in renewable energy technologies, including solar photovoltaics, wind turbines, bioenergy, and advanced energy storage systems. By applying exergy analysis, …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 12, Issue 1, 2026 · pp. 17–23 Read article
-
Solar-Based Battery Management System (BMS) And SOC Development
Abstract: The safety, efficiency, and longevity of batteries which are the most common with solar panels require a battery management system (BMS). Among the key functions of the BMS is to measure the State of Charge (SOC) of the battery which is a measure of the energy left in the battery. It is the exact value of SOC that prevents overcharging or over discharging of the battery. Furthermore, the research shows …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 12, Issue 1, 2026 · pp. 1–7 Read article
-
Solar Powered Motion-Activated Camera Based Surveillance System
Abstract: This study presents the design and installation of a solar-powered motion-activated camera aimed at enhancing security while promoting energy efficiency and sustainability. Using a PIR sensor, the system activates only upon detecting motion, reducing unnecessary power usage and data storage. It operates using solar energy, making it suitable for remote areas. With the help of a photovoltaic panel and a rechargeable battery, the system runs only on solar energy, ensuring …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 11, Issue 2, 2025 · pp. 12–19 Read article
-
A Comprehensive Study of ZnxFe2–xO3 Nanocomposite for the Applications of Medical, Photocatalytic, and Solar Cells
Abstract: ZnxFe2–xO3 nanoparticles and composites are a focus area of research in nanotechnology, biotechnology, and material engineering. The functional properties of these nanomaterials depend on the scientific method of synthesizing and characterizing procedure. In this study, greater attention is invested on biological synthesis of ZnxFe2–xO3 nanoparticles and nanocomposite. For in vivo or in vitro study, properties, such as biocompatibility, reactivity, bio sensitivity, photosensitivity, and biodegradability are considered. Besides, the Ferrofluid and …
Published in International Journal of Composite and Constituent Materials · Vol. 10, Issue 2, 2024 · pp. 44–51 Read article
-
The Role of Metallurgy in Modern Building Retrofits: Achieving Energy Savings and Sustainability
Abstract: Building retrofits have become a pivotal strategy in enhancing energy efficiency and sustainability in existing structures. As global emphasis on environmental sustainability intensifies, retrofitting older buildings to meet contemporary energy standards has gained prominence. This article examines the influence of metallurgical and materials science innovations on recent energy-saving trends in building retrofits. It explores advanced Heating Ventilation and Air Conditioning (HVAC) systems, highlighting how high-performance alloys and materials improve efficiency …
Published in International Journal of Metallurgy and Alloys · Vol. 10, Issue 1, 2024 · pp. 1–6 Read article
-
Review on Lignin, Its Derivatives and Their Applications
Abstract: Due to the excessive use of fossil fuels day by day everywhere, several severe problems on the globe and related to environmental issues like environmental problems and heating are cropping up and posing a big problem. Due to this reason, several attempts are being made to develop other sustainable alternate energy sources which are based on plant biomass. However, those materials contain lignin, which makes up approximately 18-30% of the …
Published in International Journal of Environmental Chemistry · Vol. 10, Issue 2, 2024 · pp. 5–13 Read article
-
Harvesting of Solar Energy in Nanotechnology
Abstract: Nanotechnology is an impressive technology that resolved the energy related problem to provides a wide range of resources. Many appliances and increasing mechanism may be less as compared to 100 nm, for this purpose it provides an innovative tradition in the direction of storation, catch in addition to convert the power through different mechanism. The sun has an enormous quantity of a force that may be obtained from side to …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 5, Issue 2, 2019 · pp. 15–26 Read article
-
Advanced Recent Synthesis and characterization of SnO2 NPs using Aristolochia bracteolata leaf Extract and multy Application
Abstract: The SnO2 nanoparticle was synthesised by sol-gel method and sonication technique. SnO2 nanoparticle using Aristolochia bracteolata leaf Extract. Aristolochia bracteolata is a shrup distributed in India, this family Aristolochiaceae, it is used in the medicine. The nanoparticle was characterized by HR-SEM with (EDX), (HR-TEM), XRD analysis, photoluminescence spectroscopy (PL) and UV-Vis DRS. This nanopartricles was photodegradation of Rhodamine B dye under the UV-light irradiation at 365 nm. The hydroxyl radical …
Published in International Journal of Green Chemistry · Vol. 4, Issue 2, 2018 · pp. 25–36 Read article
-
FEASIBILITY STUDIES ON A DISTILLATION CASCADE FOR PRODUCTION OF ULTRA-HIGH PURITY TRICHLOROSILANE
Abstract: Elemental silicon is the backbone of the electronics and the solar photovoltaics industry in the present times. This work examines the purification of a silicon precursor such that the total impurity content in it is limited to a few parts per million. Trichlorosilane (TCS) is one of the most important precursors in the production of electronics grade elemental silicon. This is because of the relative ease with which crude trichlorosilane, …
Published in International Journal of Chemical Separation Technology · Vol. 4, Issue 1, 2018 · pp. 19–35 Read article
-
A PARAMETRIC ANALYSIS OF AMBIENT TEMPERATURE ON FLAT AND CURVED SURFACE OF A PV CELL
Abstract: This work focused on investigating and controlling the effect of ambient temperature on the surface temperature of a PV module. An experimental approach is carried out to provide ventilation on the surface of the PV panel with the help of a blower. With the increase in solar irradiance, the panel temperature also increases so experiment is conducted for different velocities of the air with the help of a blower to …
Published in International Journal of Chemical Engineering and Processing · Vol. 4, Issue 1, 2018 · pp. 39–48 Read article
-
Core/Shell structures embedded polyaniline nanocomposite for Solar cells
Abstract: The synthesis and characterization of the conducting polyaniline (Pani) films embedded with Co2+ doped, PVA capped PbS/ZnS core-shell particles as photoluminescent boosters is reported. The photoluminescence intensity of the core-shell particles –Pani film had increased significantly.Periodic arrangement of the nanoclusters of the core-shell particles in the continuous conductive polymer matrix and high carrier density promise this material for the photoelectrochemical applications. Solid -state photovoltaic cells have been fabricated with PbS:Co/ZnS-Pani …
Published in International Journal of Environmental Chemistry · Vol. 4, Issue 1, 2018 · pp. 8–18 Read article
-
Nuclear waste heat and renewable energy derived hydrogen: Preliminary feasibility analysis
Abstract: Hydrogen, a possible carbon free energy resource of the future, can be obtained in a sustainable manner from abundantly available resource like water through low temperature, low pressure water electrolysis. This work examines the techno-economic feasibility aspects of a water electrolysis based hydrogen production plant of capacity 1000-10000 Nm3/hr, when coupled with a typical nuclear power plant in India and renewable energy resources in novel ways. The nuclear waste heat …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 4, Issue 2, 2018 · pp. 7–31 Read article
-
Feasibility studies on use of solar thermal energy for electricity production with thermo-electric generators – a case study in India
Abstract: The possibility of producing electricity using solar thermal energy harnesses through flat plate collectors working with water and commercial thermoelectric generator modules has been explored for eight locations in India. This is an alternative to solar photovoltaic electricity production. The most suitable site for setting up such facilities has been identified on the basis of total electricity generation per annum. Even though the overall energy collection efficiency of such an …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 4, Issue 2, 2018 · pp. 48–60 Read article
-
Concentrating cylindrical-parabolic solar collectors with thermo-electric generators for electricity production – viability assessment in India
Abstract: The use of concentrating solar collectors for converting solar insolation into thermal energy, followed by conversion of thermal energy to electricity via low to medium temperature thermoelectric generators at a particular location in India has been explored in this work. This may be considered a different route to obtaining solar heat and electricity apart from the more usual and direct solar photovoltaic conversion. Even though such a scheme may not …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 5, Issue 2, 2019 · pp. 6–17 Read article
-
Self-powered Portable Unit for Drinking Water Production
Abstract: The paper describes a new system to supply drinking water for human beverage requirements in natural disasters like earthquakes, volcano eruptions, flooding, hurricanes or typhoons. The system use solar energy to supply power to the drinking water production unit that operates using evaporation to obtain drinking water from dirty or polluted waters. The unit operates at low temperature thanks to the created vacuum, which reduces the evaporation point of water …
Published in International Journal of Water Resources Engineering · Vol. 8, Issue 2, 2022 · pp. 27–38 Read article
-
Design and Analysis of Low Voltage DC Grid for Domestic Supply
Abstract: The fast development of DC power based devices has led to increased involvement of AC to DC converters. A large scale research work is being conducted on increasing the efficiency of these converters to save energy. But DC microgrids are significantly more energy efficient when implemented with distributed generation or on-site generation from photovoltaic panels, wind turbines, fuel cells or micro turbines. This paper discusses the advantages and disadvantages of …
Published in International Journal of Analog Integrated Circuits · Vol. 2, Issue 1, 2016 · pp. 28–35 Read article
-
Grid Interconnection of RES at the Distribution Level with Power-Quality Enhancement Features
Abstract: This paper describes enhanced technique of power quality at utility end in a network framework associated with renewable source of energy for power generation. With advancement of new functionalities sunlight based vitality based Photovoltaic cells are forthcoming energy source with higher efficiency. With the increase in load demand, the Renewable Energy Sources (RES) are increasingly connected in the distribution systems which utilizes power electronic Converters/Inverters. The Photo Voltaic (PV) Panel …
Published in International Journal of Analog Integrated Circuits · Vol. 1, Issue 1, 2015 · pp. 18–26 Read article
-
Solar Panel Cleaner
Abstract: Dust and dirt particles accumulating on the PV panel decreases the solar energy reaching the cell and thereby reducing the overall efficiency of cell. Hence, cleaning of PV panel is one of the areas of discussion in the engineering sector of solar power generation. In this study, an optimal solution for solar panel cleaning is reviewed. A portable robotic cleaning device is developed and versatile rail system which can travel …
Published in International Journal of Analog Integrated Circuits · Vol. 4, Issue 1, 2018 · pp. 33–37 Read article