Search
223 articles for “physical properties”
-
Walnut Shells’ Potential Use as Biofillers in Natural Rubber Composites
Abstract: The study assessed the potential of walnut shells as a filler in natural rubber composites. Walnut shells were finely ground, sieved through a 75 μm mesh, and incorporated into natural rubber at different filler loadings: unfilled, 20 parts per hundred rubber (phr), 30 phr, 40 phr, and 50 phr. The physicochemical properties of the walnut shell powder were analyzed, yielding results of 5.30 for pH, 10.10% for moisture content, 2.50% …
Published in International Journal of Polymer Science and Engineering · Vol. 10, Issue 2, 2024 · pp. 1–5 Read article
-
Dry Season Impact on Water Quality of Nworie River, Owerri, Nigeria
Abstract: This study assessed the physicochemical properties and heavy metal contamination of Nworie River during the dry season. Fifteen composite water samples were collected from strategic points along the river. In-situ measurements of pH, temperature, and electrical conductivity were undertaken, while laboratory analyses determined heavy metal concentrations. Pollution Load Index and Contamination Factor were employed to evaluate the overall water quality and contamination levels. Results indicated moderate to high levels of …
Published in International Journal of Analytical and Applied Chemistry · Vol. 11, Issue 1, 2025 · pp. 40–49 Read article
-
Synthesis and Biological Evaluation of a Novel Schiff Base Ligand [(E)-2,4-Dichloro-6-(1-((4-Fluorophenyl) iminoethyl)phenol] and Its Metal Complexes
Abstract: The study involved the synthesis and characterization of a novel bidentate Schiff base ligand, [(E)-2,4-dichloro-6-(1-((4-fluorophenyl) iminoethyl) phenol)], derived from 1-(3,5-dichloro-2-hydroxyphenyl) ethanone and 4-fluoroaniline. Transition metal salts (Co (II), Cu (II), Fe (II), Zn (II), Ni (II), Mn (II), Ag (II), Cd (II), Hg (II), and Pd (II)) were used to synthesize metal complexes. The chemicals used were of analytical grade, and solvents were distilled before use. Characterization involved UV, IR, …
Published in International Journal of Analytical and Applied Chemistry · Vol. 10, Issue 1, 2024 · pp. 26–35 Read article
-
The essence of Nanotechnology; Nanoparticles and cutting edge applications in Molecular electronics and Molecular medicine
Abstract: In this paper, the essence of nanotechnology is presented. Nanotechnology is emerged as a fabrication method, computational tools, and revolutionized electronics and medicine. The bio-chemo-physical properties are understood in different dimension with emphasis on various synthesis techniques and size dependent physio-chemical properties. Most properties resulting from size reduction from macro scale to nanoscale and molecular interactions with nanoparticles significantly contributes to its multi function. A systematic illustration of nanotechnology at …
Published in International Journal of Applied Nanotechnology · Vol. 10, Issue 1, 2024 Read article
-
Increase the Shear Strength of Soil by Partial Replacement of Fly Ash
Abstract: Soil is the foundation for any civil engineering structures. It is required to bear the loads without failure. In some places, soil may be weak which cannot resist the oncoming loads. In such cases, soil stabilization is needed, numerous methods are available in the literature for soil stabilization. In this study, fly ash was mixed with clay soil to investigate the relative strength gain in terms of Vane shear test, …
Published in International Journal of Sustainable Building Technology · Vol. 2, Issue 2, 2019 · pp. 59–77 Read article
-
Bamboo Reinforced Low Cost House - A Case Study
Abstract: The objective is to set up a low cost house using bamboo and its culms as reinforcement material. A prototype of such a construction has been undertaken in an area of 255 sq.ft. As bamboo acts as a structural member, it can replace steel as reinforcement. The proposed structure consists of four supporting column and one main column at its centre to achieve a better economy due to reduction in …
Published in International Journal of Town Planning and Management · Vol. 2, Issue 1, 2016 · pp. 59–70 Read article
-
Effective Utilization of Agriculture Waste
Abstract: Agricultural substances are produced on the earth with the change of seasons. Basically these substances are produced in the nature and are very important for the survival of consumers such as animals and human beings. These substances are widely available on earth, can be a good source of energy or can be converted into useful products. The wastes generated from the crops have a good potential to get converted to …
Published in International Journal of Plant Biotechnology · Vol. 5, Issue 1, 2019 · pp. 13–17 Read article
-
Performance Evaluation of Azadirachta indica Leaf on Crude Oil Contaminated Soils
Abstract: The intention of this research was to ascertain the effectiveness of sun-dried and room-dried Azadirachta indica leaf at varying quantities, in the remediation of sandy and loamy soils contaminated with 100ml of crude oil. Gas Chromatography-Mass Spectrometry method was used to test for the physicochemical properties of the materials used for the experiment. The unpolluted loamy soil was observed to contain pH of 6.75, electric conductivity of 10.36µS/cm, Total Oxygen …
Published in International Journal of Plant Biotechnology · Vol. 6, Issue 1, 2020 · pp. 35–45 Read article
-
Nanocomposite Hydrogels for Water Purification
Abstract: DNA hydrogels have been demonstrated as versatile catalysts, potential adsorbents, sensors and immobilization carriers of bioactive molecules. They are a type of tenuous, semiflexible polymeric network that consists of precisely designed synthetic nucleotide strands as chemical or physical cross-linkers. Hydrogels have been widely studied due to their improved physicochemical properties and used as antibacterial platforms, wastewater pollutants, adsorbents and drug deliverers. Because of their biocompatibility and the ability to mix …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 4, Issue 2, 2018 · pp. 17–21 Read article
-
Computation of Biokinetic Parameters of Total Petroleum Hydrocarbon Degradation using Vernonia amygdalina Stem
Abstract: This investigation showcases the computation of biokinetic parameters of total petroleum hydrocarbon degradation using Vernonia amygalina stem as bio-stimulant for the remediation of contaminants in loamy soil environment. The research revealed decrease in TPH degradation with increase in contact time and the percentage reduction was computed. The result shows TPH (100 dosage) > TPH (75g dosage) > TPH (50g dosage) > TPH (25g dosage) > TPH (control sample) and the …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 9, Issue 2, 2023 · pp. 26–38 Read article
-
PETROLEUM PRODUCTS: FRACTIONS OF CRUDE OIL
Abstract: Petroleum (also called crude oil), is a source of energy which is non-renewable. It is a naturally occurring liquid found beneath the Earth’s surface (Lithosphere) that can be refined into fuel. Petroleum is a fossil fuel, which means that it has been created by the decomposition of organic matter over millions of years. It is developed in sedimentary rock under severe heat and pressure. Petroleum or crude oil is a …
Published in International Journal of Analytical and Applied Chemistry · Vol. 5, Issue 2, 2019 · pp. 17–33 Read article
-
Modification of PVA & PMMA with blending and UV Irradiation
Abstract: Abstract-Vinyl polymers have good scope of modification by crosslinking, grafting and other different techniques. UV irradiation is also used for surface modification. In this study PVA and PMMA modified by blending with starch as well as with UV irradiation. Surface crosslinked PVA and PMMA films were set up by applying ultra violet (UV) irradiation. The impacts of convergence of photosensitizer watery arrangement, drenching time and UV light portion on a …
Published in International Journal of Chemical Separation Technology · Vol. 6, Issue 1, 2020 · pp. 1–5 Read article
-
Electrolytic Deposition of Zn–Ni Alloy from Acidic Sulphate Bath and Their Characterization
Abstract: A bath containing ZnSO4.7H2O, NiSO4.7H2O, thiamine hydrochloride (THC) and citric acid (CA) has been proposed. Bright Zn–Ni alloy coatings were developed galvanostatically onto mild steel (MS) and their corrosion resistance and other physical properties were studied. THC was found to improve the brightness and homogeneity of the deposit. The dependency of bath composition, current density (c.d.), pH and temperature, agitation on wt.% Ni were tested. Deposition was carried out under …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 2, 2016 · pp. 19–32 Read article
-
Critical Examination on Aluminum Corrosion in Marine water Media Environment
Abstract: Investigation into the critical examination on aluminum corrosion in marine water media environment of Niger Delta in Nigeria was monitored using experimental and theoretical approach. Weight loss was experienced with increase in the period of exposure indicating the occurrence of corrosion of aluminum in both fresh and salt water body. The weight loss and corrosion rate characteristics of the aluminum in the river water media environment was further examine using …
Published in International Journal of Environmental Chemistry · Vol. 4, Issue 1, 2018 · pp. 29–43 Read article
-
Bioremediation of Polluted Drainage with Petroleum Hydrocarbon
Abstract: This research was aimed at examining the petroleum product discharge in drainage within Port Harcourt City, samples were collected and mixed. Microbial analysis and physicochemical properties of the sample were determined. The sample was subjected into bioremediation after culturing of the microorganisms isolated, identified and characterized. The two microorganisms used are pseudomonas aeruginosa and aspergillus niger. The results obtained revealed high concentration for heavy crude oil than mixed crude oil; …
Published in International Journal of Environmental Chemistry · Vol. 7, Issue 2, 2021 · pp. 24–34 Read article
-
Stability Analysis of Mahua Seed and Waste Polystyrene Co-pyrolytic Oil
Abstract: Biomass pyrolytic oil is a complex mixture of organic compounds and obtained in a non-equilibrium state. Hence, the physical properties of bio-oil such as calorific value, viscosity, pH, density, flow ability and chemical compositions vary during storage. In this study, co-pyrolysis of Mahua seed was performed with waste polystyrene and studied the fuel properties and composition. The co-pyrolytic oil was produced at 2:1 ratio of seed to waste polystyrene using …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 2, Issue 1, 2016 · pp. 1–7 Read article
-
Ionic liquids: as a solvent for electrodeposition of metals and energy conversions
Abstract: Over the past decade, Ionic Liquids have attracted much interest for their use as non-aqueous electrolytes in electrochemical applications. In this context, their conductivity as well as their electrochemical stability are the most important physical properties. Together with other interesting properties such as their negligible vapor pressure and their non-flammability, they appear to be ideal electrolytes for many interesting applications such as electrodeposition of metals with maximum current efficiency (CE) …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 3, Issue 2, 2017 · pp. 19–38 Read article
-
Impact of Additives on the Split Tensile Strength of Roller Compacted Concrete
Abstract: Additives are implemented as partial replacement of Portland cement in concrete to enhance the required physical properties. In the present investigation, roller compacted concrete slab samples were prepared using gap and dense aggregate gradation. Three percentages of Portland cement were adopted, (16, 12, and 10) % by weight of aggregates. Three types of additives, (hydrated lime, fly ash, and fumed silica) were implemented as partial substitute of Portland cement. Core …
Published in International Journal of Concrete Technology · Vol. 7, Issue 2, 2021 · pp. 9–15 Read article
-
Variation on Water Quality Parameters Including Trace Elements of Brahmani River over a Stretch of Six Districts in Orissa, India
Abstract: Surface water samples from river Brahmani of Orissa, India were collected from 17 locations of 6 districts all along the northwest and southeast of Orissa in three different phases; winter, pre-monsoon and post-monsoon. The collections were done in the month of January, May and September. Samples were tested for each category, viz. physical, chemical and trace elements and their average values were considered for a more approximate comparison. In each …
Published in International Journal of Water Resources Engineering · Vol. 3, Issue 2, 2017 · pp. 53–61 Read article
-
Microwave synthesis of nanoparticles
Abstract: Synthetic exposure of material fabrication has reviewed in this article to study acceptability of treat by microwave. Competitive scheme and scope has assigned microwave assisted synthetic produce to that of convened method. Ethic has pursued for production of silver nanoparticles in ethylene glycol i.e. boiling point of 200 °C. Suggestive has pursued usage of higher temperatures and pressure accuse i.e. adoptive towards microwave reactor. Nanotechnological implement fabricate has issued to …
Published in International Journal of Microwave Engineering and Technology · Vol. 7, Issue 1, 2021 · pp. 29–34 Read article