Search
1495 articles for “work”
-
Mathematical Model to Monitor Concrete Compressive Strength Partially Replaced with Periwinkle and Palm Kernel Shell as Aggregate
Abstract: This research work monitor that application of periwinkle and palm kernel shell as partial replacement for aggregate, the study are carried out applying modeling and simulation techniques, concrete are normally heterogeneous in most cases, but the study try to examine the growth rate of the material on their compressive strength, such process were carried out using these two locally sourced material at different percentage of replacement for aggregate, the study …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 2, 2023 · pp. 6–28 Read article
-
Fracture and Failure of Recycled Aggregate Concrete (RAC) – A Review
Abstract: In the world, many countries put into effect the renewal plans and/or the laws and/or the regulations for recent engineering structures which have reached their lifetime, are risk prone and have been built lacking quality engineering, or without considering urban planning. Hence, many structures are demolished and this situation increases the amount of construction and demolition waste (C & DW). Also, resource consumptions are rapidly increased due to excessive constructional …
Published in International Journal of Concrete Technology · Vol. 1, Issue 1, 2015 · pp. 31–48 Read article
-
Abrasion resistance, compressive strength and elasticity modulus of recycled aggregate concrete (RAC) included lower quality recycled aggregate with and without silica fume
Abstract: The usage of recycled aggregate (RA) for concrete works is spreading for gaining wide acceptance around the world, and total amount of RA utilized in concrete industry increases day-by-day. RA is used in many concrete products, such as concrete interlocking blocks, pavements, etc. One of the physical causes of concrete deterioration is surface wear or loss of mass for concrete products which are especially exposed to vehicular traffic (i.e., industrial …
Published in International Journal of Concrete Technology · Vol. 2, Issue 1, 2016 · pp. 1–18 Read article
-
Influence of GGBFS on the Mechanical Properties of the Water Cured Fly Ash Aggregate-Based Geopolymer Concrete
Abstract: Abstract Conventional concrete consists of cement, sand as fine aggregate and gravel, limestone or granite in various sizes and shapes as coarse aggregate including with water. In the present work, the feasibility of using industrial inorganic polymeric residues wastes as a total (100%) replacement to the traditionally used normal conventional concrete materials is examined in the preparation of the geopolymer concrete (GPC). In this GPC, the cement is totally replaced …
Published in International Journal of Concrete Technology · Vol. 2, Issue 1, 2016 · pp. 54–64 Read article
-
Influence of Type and Size of Fine Aggregate on Glass Fiber Reinforced Self-Compacting Mortars (GFRSCM)
Abstract: Abstract This paper addresses the fresh and hardened state behavior of glass fiber reinforced self-compacting mortars (GFSCMs) with various types and sizes of fine aggregate. Mini-slump flow and mini V-funnel tests were performed to evaluate the workability of GFSCMs. Compressive strength, split tensile strength, and flexural strength tests at the end of 28 days of water curing were determined. Water sorptivity tests were conducted on 28-day cured cube specimens. The …
Published in International Journal of Concrete Technology · Vol. 1, Issue 1, 2015 · pp. 63–71 Read article
-
Effect of Replacing Rice Husk Ash with Cement and Granulated Blast Furnace Slag with Fine Aggregates on High Performance Concrete
Abstract: Cement and sand are the basic materials for any concrete construction. Now a day’s due to erosion of rivers and considering environmental issues, there is a scarcity of river sand. Many researchers are finding different materials to replace sand and one of the major materials considered in this study is granulated blast furnace slag (GBFS). In recent times, instead of cement many alternative materials are being used as the binding …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 30–35 Read article
-
Effect of variation of Elevated Temperature on Compressive Strength of Metakolin concrete
Abstract: It has been found that high early temperature has negative impacts on later compressive strength of concrete. Some researchers investigated the adverse effect on long term strength of concrete due to high initial temperature. The effect of temperature on different properties of concrete is considerable and remained the subject of research activities of a lot of researchers. Different investigators moved in different ways and investigated temperature effect by changing different …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 9–16 Read article
-
Experimental Study on the Properties of Self-Curing Concrete
Abstract: This paper highlights the effect of curing agent polyethylene glycol (PEG-400) in the performance of concrete. The chemical agent PEG is used with different percentage; 1%, 2% and 3% to the weight of cement. Super plasticizer named glenium was used to improve the workability of concrete. The property such as compressive strength and split tensile strength of concrete was examined with normal curing and self-curing at 7 days and 28 …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 8–13 Read article
-
A Review on Experimental Investigation of Fibre Reinforced Metakaolin-Based Geopolymer Concrete
Abstract: The development of new binders, as an alternative to Portland cement (PC), by alkaline activation, is a current researcher’s interest. As Concrete is the most commonly used material for construction. The worldwide production of cement has greatly increased after 1990. Production of cement results in a lot of environmental pollution as it involves the emission of CO2 gas. There are many ways to which we can reduce environmental pollution (carbon …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 44–55 Read article
-
No Fine Concrete
Abstract: No-fine concrete has been in use in many countries over more than a century. Its higher porosity helps in percolating rain water directly to ground and thereby helps in recharging groundwater aquifer. In this study, 3 batches of no-fine concrete each with two different sizes of aggregate were prepared to find the mix that generated high compressive strength and study the effect of percentage of fine aggregate on the compressive …
Published in International Journal of Concrete Technology · Vol. 3, Issue 2, 2017 · pp. 18–30 Read article
-
Utilization of Waste Plastics as a Fiber in Concrete
Abstract: The rapid urbanization and industrialization all over the world has resulted in large deposition of plastic waste. Disposal of plastic waste in an environment is considered to be big hazard due to its very low biodegradability and presence in large quantities. In order to minimize the problem, the proposed concrete which is made by adding plastics in concrete may help to reuse the plastics and to study the properties of …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 56–60 Read article
-
An Experimental Study on Concrete by Replacement of Coarse Aggregate with Demolished Building Waste in Crushed Concrete
Abstract: A large amount of construction and demolition wastes are produced annually in India. These waste materials require a large place to dispose and then the disposal of wastes has become a severe problem. The continuous use of natural resources for making conventional concrete leads to the reduction in their availability and results in the increase of the cost of the coarse aggregate and fine aggregate. The possible use of recycling …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 25–28 Read article
-
Study on Partial Replacement of Cement by Bagasse Ash in Cement Concrete
Abstract: Today, researchers all over the world are trying to utilize agricultural wastes like corncob ash, rice husk ash, bagasse ash as a partial replacement of cement, thereby reducing cement production and greenhouse gases emissions. Sugarcane bagasse is a fibrous waste product of sugarcane refining industry and being disposed to open landfills causing serious environmental impacts. In this study, Bagasse ash was partially replaced in the ratio of 0%, 5%, 10%, …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 29–35 Read article
-
An overview on the rheology of recycled aggregate concrete with the influence of chemical admixtures
Abstract: : Concrete is one of the most widely used construction material because of its property to be moulded into any kind of structure and shape due to its fluidity at early stages. The fresh properties of concrete can be characterized by its flow behaviour. Rheology is the scientific description of flow properties. Super-plasticizers and air-entrainers are some of the most used chemical admixtures that affect the rheological parameters of fresh …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 14–24 Read article
-
Experimental Study on Partially Replacement of Fine Aggregate & Coarse aggregate by Waste Marble with addition of S-Fiber
Abstract: Today’s world is a concrete jungle. With the ever increasing population of the world, in general and the developing countries there is the tremendous pressure on the Civil Engineer to develop a cost effective as well as ecofriendly structure to fulfill the need of the human being. Concrete is a heterogeneous mixture of binding material (cement or lime), coarse aggregates, fine aggregates (sand) and water. Fine and coarse aggregates are …
Published in International Journal of Concrete Technology · Vol. 5, Issue 2, 2019 · pp. 1–9 Read article
-
Mechanical Properties of sand blasting residue concrete
Abstract: Sand Blasting Residue (SBR) form chain manufacturing companies as a large massive by-product. Steel-slag hydrated matrix is made of ground granulated blast furnace slag powder & steel-making slag which is the by-product of iron manufacturing. This type of construction material is called environmental conscious material in Japan. This research presented that the strength of steel-slag hydrated matrix depends on the pH of the steel-slag hydrated matrix after mixing. Firstly, cement, …
Published in International Journal of Concrete Technology · Vol. 6, Issue 2, 2020 · pp. 46–52 Read article
-
Effect of Temperature on mechanical properties of Geopolymer concrete: A Review
Abstract: Concrete is the most widely used material after water in building and construction field. It is the oldest man-made material and is easily available for use at cheaper costs. This material is causing harm to environment on mass extent. OPC i.e. Ordinary Portland Cement is second contributor after automobile industry in Carbon Dioxide emission. This review presents the study of replacement of regular concrete cement with cementitious material like fly …
Published in International Journal of Concrete Technology · Vol. 7, Issue 1, 2021 · pp. 24–28 Read article
-
DETAILED STUDY ON THE PROPERTIES OF PLASTIC CONCRETE CUTOFF WALL MATERIALS MIXED WITH WATERPROOFING ADMIXTURES
Abstract: This study presents the results of a comprehensive experimental work performed to characterize the mechanical and hydraulic properties of plastic concrete materials added with water-resisting and crystalline admixture as Permeability Reducing Admixture for Hydrostatic conditions (PRAH). The mechanical properties, deformation, permeability nature, triaxial stress-strain curve, hydration products, phase composition, and pore structure of plastic concrete with various proportions of PRAH were investigated. In addition to that, retarding admixture was used …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 1–15 Read article
-
Application of Fly Ash and Lime as Partial Replacement of Cement in Concrete
Abstract: Concrete as a construction material plays a significant role in infrastructures development in the world. The main constituents of concrete are cement, fine aggregate, coarse aggregate, and water. Production of cement has been emitting a huge amount of carbon dioxide in the atmosphere. Hence causing environmental pollution. Amount of fly ash generation has been increasing day by day which has also been damaging the environment in the form air, water …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 41–45 Read article
-
Evaluation of Soil Reinforcement Potential of Grass Variety
Abstract: Reinforcement potential of plant root is studied by many researches across the globe. This work aims to analyze the effect of grass root in the improvement of engineering properties of soil. Plant roots being a natural material help in enhancing the shear strength of soil. Field and laboratory studies were conducted on a grass variety (Co-4) and the soil reinforcement potential of the plant is studied. It is found that …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 1, Issue 1, 2015 · pp. 14–18 Read article