Search
2000 articles for “3-phenyl-2-propen-1-ol” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Design and Construction of High-Performance Vehicle Tracking System
Abstract: A vehicle tracking system (VTS) has been designed, constructed, and evaluated. The main purpose is to accurately determine the position of a vehicle at any time with minimal response delay. The device consists of a GPS receiver, a microcontroller, and a GSM module. These systems function by constantly monitoring and tracking the positional location of the vehicles and concurrently reporting the details to the central location via SMS on an …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 7, Issue 1, 2021 · pp. 25–35 Read article
-
Design and Analysis of Broadband Flexible Antenna for Remote System
Abstract: ABSTRACT In this anticipated antenna, jeans have been utilized as a substrate. The dielectric constant of substrate is 1.7 and patch has been made by copper tape. The benefits of jeans are long wearing, simple consideration attire, and cost effective. This anticipated antenna provides gain of 3.592 dBi at 5.27 GHz. In this paper, the analysis has been focused on S11, radiation pattern, directivity and polar plot. Keywords: Jeans, microstrip …
Published in International Journal of Microwave Engineering and Technology · Vol. 5, Issue 1, 2019 · pp. 19–23 Read article
-
Combination of Triangular and Semi Circular Microstrip Patch Wideband Antenna for Wireless Application
Abstract: ABSTRACTThe combination of triangular and semi-circular wideband dipole antenna with single feed line is proposed for wireless application. The proposed antenna consists of Arrow shaped patch antenna operating at the wideband frequency of 1.6305GHz-3GHz. In this antenna material used for designing is FR-epoxy, height of the substrate is h=1.6mm. Dielectric substrate and relative permittivity are =4.3, tanδ=0.02. Keywords: Dipole antenna, Microstrip patch antenna, Wideband antenna.Cite this Article: Sandeep Barua, Combination …
Published in International Journal of Microwave Engineering and Technology · Vol. 5, Issue 2, 2019 · pp. 8–12 Read article
-
Design and Simulation of Improved Particle Swarm Optimization Based Capacitor Placement in Distributed Generation System
Abstract: A major investigation was carried out to arrange the optimal condenser arrangement for the powerfactor adaptation, improvement of the voltage profile and the decrease of losses within theappropriation frameworks. In particular, a mechanical plant has large inductive loads withunpredictable load conditions and an incredibly low power factor. In most situations, the key reasonwhy a customer sends a condenser bank is to keep the power bank free from punishment. Power factoris …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 7, Issue 1, 2021 · pp. 1–10 Read article
-
Investigations of Ruthenium an Energetic Material
Abstract: The energy of ruthenium catalyzed degradative oxidation of methylparaben by the copper complex, is researched at 30ºC and at an ionic strength of 60 × 10−3mol dm−3. In the presence of catalyst ruthenium(III), the reaction between methyl and diperiodatocuprate in aqueous alkaline medium exhibits 1:1 stoichiometry.
Published in International Journal of Energetic Materials · Vol. 2, Issue 1, 2016 · pp. 27–30 Read article
-
Study and Implementation of High Performance Energy Harvester using Aerosol Deposition Method.
Abstract: This paper reports the high-performance piezoelectric energy harvester (EH) fabricated with PbxZr1-xTiO3 (PZT) or xPb(Mg1/3Nb2/3)-(1-x)PbTiO3 (PMN-PT) by aerosol deposition method. The other EH with the same construction and similar thickness of PZT thin film are fabricated and used as a comparison basis. The electrical and mechanical properties of both transducers are characterized and discussed. According to our previous work [1], the output power of a EH not only depends on …
Published in International Journal of Energetic Materials · Vol. 4, Issue 2, 2018 · pp. 28–33 Read article
-
Study the Corrosive Effect of Greenhouse Gases on Metallic and Non-metallic Materials
Abstract: Carbon dioxide is a major corrosive pollutant for building materials. It enters inside materials by diffusion or osmosis process and in presence of moisture it produces H2CO3 which decrease the pH value and accelerates chemical and electrochemical reaction with building materials. The carbonation reaction produces deterioration inside and outside of building materials. It produces corrosion reaction with metallic bar and disbanding with concrete. CO2 reacts with Ca (OH)2 and Mg(OH)2 …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 2, 2021 · pp. 17–28 Read article
-
Blue Shift of Sol-gel Synthesized ZnO Nano-particles: Size Dependent Quantum Confinement Effect
Abstract: Zinc oxide nano-crystals with different size and shape were synthesized by sol-gel technique at 90°C. ZnO nano-particles show (100), (002), (101), (102), (110), and (103) crystalline orientation and strong band-edge emission at 408 nm. Grain size of ZnO nano-crystals varies from 4 nm to 20 nm due to variation of molar ratio of polyethylene glycol with zinc acetate during synthesis. ZnO nano-materials with grain size 4 nm and 8 nm …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 1, Issue 1, 2015 · pp. 8–15 Read article
-
Controlled Texture of Magnetron Sputtered Transparent Conducting ZnO: Al Films for Solar Cell Applications
Abstract: Textured transparent and conducting ZnO:Al films were prepared by rf-magnetron sputtering on glass substrate at a temperature 3500C under Ar and Ar+O2 gas ambient. ZnO:Al thin films shows a minimum electrical resistivity of (~8.210-4 Ω-cm), and high optical transmittance (T~86–90% average) in visible region. With increasing of oxygen concentration ZnO:Al films become more compact, stoichiometric and becomes more electrically resistive. ZnO:Al shows hexagonal wurtzite polycrystalline structure with strong (002) orientations. …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 1, Issue 2, 2015 · pp. 12–19 Read article
-
Synthesis and Characterization of Cesium Intercalated Graphene Thin Film
Abstract: Graphene Oxide (GO) becomes promising two-Dimensional (2D) material in optoelectronics due to its sparkling properties. In preparation step we used Carboxylation of graphene and vacuum filtration to create the free standing thin film of cesium (Cs) intercalated GO. In this work we have synthesized cesium (Cs) intercalated GO thin films at different concentration (0.03, 0.05, 0.1 mol %) by using vacuum filtration method. The functional group present in synthesized thin …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 4, Issue 1, 2018 · pp. 8–16 Read article
-
Fabrication, Microstructure and Mechanical Behavior of Aluminum Alloy (LM-13) Reinforced with Nano-ZrO2 Particulate Chilled Nano-Metal Matrix Composites (CNMMCs)
Abstract: In the present research, aluminum alloy (LM13) Metal Matrix Composite (MMC) is prepared by stir casting technique and is reinforced with ZrO2 particulates in the weight percent ranging from 3 wt.% to 12 wt.% in the steps of 3 wt.%. The reinforcement i.e., ZrO2 particle size added varies between 100–200 nm. The resulting CNMMCs are solidified under the influence of copper chill of 25 mm thickness to study the effect …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 6, Issue 2, 2020 · pp. 17–30 Read article
-
Synthesis of Zero Valent Silver Nanoparticles by Chemical Reduction Method and its Application
Abstract: Chemical synthesis is one of the commonly used method for nanoparticles synthesis. Different chemicals acts as reducing agents which converts chemical precursor into its nano form. There are various chemical methods for the synthesis of zero valent silver nanoparticles. The silver nitrate is commonly used as precursor, sodium borohydride acts as reducing agent while sodium dodecyl sulphate stabilizes the formation of nanoparticles. The formation of silver nanoparticles was characterized by …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 7, Issue 2, 2021 · pp. 8–17 Read article
-
Tribological Behavior of Chilled Aluminum Alloy (LM-13) Reinforced with Titanium Carbide (TiC) Metal Matrix Composites for Automobile Applications.
Abstract: In the present research, aluminum alloy (LM13) Metal Matrix Composite (MMC) is prepared by stir casting technique and is reinforced with titanium carbide (TiC) particulates in the weight percent ranging from 3 wt.% to 15 wt.% in the steps of 3 wt.%. The dispersoid i.e. TiC particle size added varies between 100–200 µm. The resulting MMCs were solidified under the influence of copper chill of 25 mm thickness to study …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 2, 2020 · pp. 24–46 Read article
-
Sliding wear behavior of plasma sprayed NiCrAlY-WC based composite coatings on AA5083 alloy
Abstract: WC based coatings was deposited by thermal spray process have been extensively used in industrial application to counter abrasive type of wear. In this study, for the first time NiCrAlY-WC based composite coatings were deposited on AA5083 substrate by plasma sprayed coating technique. The composite coatings were characterized by optical microscopy (OM), scanning electron microscopy (SEM) and microhardness. Sliding wear behavior of coated and uncoated samples was carried out on …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 21–26 Read article
-
Analyzing the Effect of Rice Husk Ash & Quartz Powder on Mechanical Properties of Polypropylene Fiber Based Concrete Using Regression Analysis
Abstract: Several works were identified with sustainable development have uplifted the improvement of composite binders incorporating Portland cement, industrial, agricultural by- products and partial substitutions to aggregates. One of the most adverse effects of using cement is the emission of CO2 into atmosphere during production and it can be reduced with the effective use of cementitious materials. Several efforts were attempted to make use of supplementary cementitious materials to enhance the …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 2, 2021 · pp. 51–57 Read article
-
The Potential Application of Walnut Shells as Biofillers for Natural Rubber Composites
Abstract: It was evaluated whether walnut shells should be used as filler in composites made of natural rubber. Samples of walnut shells were ground to fine powders, sieved through a 75 μm mesh, and were used in compounding natural rubber using varying filler loading of unfilled, 20 hpr, 30 hpr, 40 hpr, and 50 hpr. The physicochemical analysis results of the walnut shell powder were 5.30, 10.10%, 2.50%, 43.70%, 49.70 mg/g, …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 2, 2022 · pp. 30–34 Read article
-
Sorption of Pb (II), Cd(II) and Zn(II) by synthesized nanocrystalline sodium potassium flurophlogopite (FGP)
Abstract: We have successfully synthesized nanocrystalline sodium potassium fluorophlogopite (FGP) crystals with controlled sizes from ≈ 25 nm to 100nm, using an organic tetrapropylammonium (TPA) hydroxide. We have been successfully synthesized material depends on the source of silicate and hydrothermal crystallization conditions. The synthesized materials were characterized by using different techniques such as X-ray diffraction, Energy Dispersive Analysis, Scanning Electron Microscope, Transmission Electron Microscopy and FTIR analysis. The use of sodium …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 2, 2023 · pp. 41–49 Read article
-
Characterization of the Impact Strength in Cryogenic Treatment of TIG Welded Nickel-based Superalloy
Abstract: The TIG welding of the IN617 heat and oxidation resistant has been precisely controlled through welding parameters, while γ'-Ni3(Al, Ti) phases predominantly controlled solution strengthening, and precipitation strengthening and carbides in γ matrix, as well as γ' precipitate’s shearing mechanism is prominent to enhance strength of superalloys. The high hardness has been preserved owing to strengthening major elements such as Cr, Co, and Mo etc., and the well coherency maintain …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 2, 2023 · pp. 1–12 Read article
-
Synthesis and Characterization of Poly(vinylpyrrolidone) / Starch / Dimethylacrylamide Hydrogel by Gamma Radiation and Its Application in Basic Fuchsin and Methyl Orange Removal
Abstract: Gamma radiation was used to create a number of PVP/Starch/Dimethylacrylamide (PSD) based hydrogels. Investigated were the effects of several parameters, such as radiation dose, material composition, and pH, on the characteristics of hydrogels, such as gel content and swelling behavior. Radiation doses ranged from 10 to 25 kGy, and 10 kGy was determined to be the ideal dose. Investigations on the impact of dimethylacrylamide (DMA) composition on swelling were investigated. …
Published in International Journal of Polymer Science and Engineering · Vol. 9, Issue 2, 2023 · pp. 1–20 Read article
-
To Analyze and Study CNC Lathe in Turning Machining Parameters
Abstract: Metal matrix composites (MMCs) consists an important class of design which have weight-efficient structural materials that are inspiring every field of engineering applications. There has been an increasing interest in composites containing low density and low-cost reinforcements. Among various discontinuously dispersed solids used, alumina is one of the most inexpensive and low-density reinforcement available in large quantities as solid waste by-product during combustion of coal in thermal power plants. Hence, …
Published in International Journal of Mechanics and Design · Vol. 3, Issue 2, 2017 · pp. 24–29 Read article