Search
277 articles for “Chemical processing”
-
Design of a Plug Flow Reactor for Production of Refrigerants from Natural Gas Chlorination
Abstract: The design of a plug flow reactor and distillation column for the production of refrigerants from natural gas chlorination, was aimed at achieving high purity volume percent of Methyl Chloride (CH3Cl) and Methylene Chloride as desired products. Aspen HYSYS software was used to simulate the reactor. The reaction was carried out at a temperature of 3000C and 1atm Pressure, Methane to Chlorine ratio was set at 1.5:1 to favour the …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 2, 2021 · pp. 10–22 Read article
-
Study the Corrosive Effect of Greenhouse Gases on Metallic and Non-metallic Materials
Abstract: Carbon dioxide is a major corrosive pollutant for building materials. It enters inside materials by diffusion or osmosis process and in presence of moisture it produces H2CO3 which decrease the pH value and accelerates chemical and electrochemical reaction with building materials. The carbonation reaction produces deterioration inside and outside of building materials. It produces corrosion reaction with metallic bar and disbanding with concrete. CO2 reacts with Ca (OH)2 and Mg(OH)2 …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 2, 2021 · pp. 17–28 Read article
-
Development of Azadirachta Indica Zinc Oxide Nanoparticles and their Prospective Role in Wastewater Treatment
Abstract: An advanced and eco-friendly method for development of nanoparticles is the fundamental role of Nanotechnology. In recent times, the domain of nanotechnology and nanoscience research has witnessed remarkable advancement, resulting in its colloquial name "tiny science." The convergence of nanotechnology and biology leads to the emergence of a highly sophisticated domain known as nanobiotechnology. Nanoparticles are considered the primary structural units in nanotechnology. These particles, referred to as NPs, are …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 10, Issue 1, 2024 · pp. 32–51 Read article
-
Preparation and Characterization of Ce-Si-SBA-15 Modified With Iron
Abstract: Recently environmental concerns have driven the development of specialized catalysts to prevent polluting substances from being released into the environment. New technologies have improvised our understanding of catalytic functions as well as selectivity in order to save the energy and chemicals. Today, catalysis is the workhorse in the chemical industry with approximately >90% of the products produced in catalytic processes. In addition, life cannot exist without catalysis, as virtually all …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 2, Issue 1, 2016 Read article
-
Synthesis and Characterization of Polymer-Based Organic–Inorganic Hybrid Materials viaSol–Gel Processing: A Review of Gelatin–Silica, Gelatin–Silica–Titania and HPMA-Based Systems
Abstract: Organic–inorganic hybrid materials have emerged as a versatile class of advanced materials that integrate the flexibility and functionality of organic polymers with the thermal, mechanical, and chemical stability of inorganic networks. Among the available fabrication routes, the sol–gel process has gained considerable attention because of its simplicity, low processing temperature, compositional flexibility, and ability to tailor material properties at the molecular level. The present review discusses the synthesis and characterization …
Published in International Journal of Polymer Science and Engineering · Vol. 12, Issue 2, 2026 Read article
-
Study of Groundwater and Surface Water Remediation
Abstract: Groundwater remediation is the process of treating contaminated groundwater by removing contaminants or converting them to harmless chemicals. Water that saturates the pore space in the subsurface and is located beneath the ground surface is known as groundwater. Between 25% and 40% of the world's drinking water comes from boreholes and dug wells. Farmers need groundwater to irrigate crops, while industry use it to make everyday items. Even though most …
Published in International Journal of Green Chemistry · Vol. 7, Issue 2, 2021 · pp. 21–26 Read article
-
TYPES and CHARACTERISTICS of MILIARIA
Abstract: Flotation method is majorly availed in two sectors: mining industry (for separation of metal ores) and in wastewater treatment process (both for municipal and industrial wastewaters) for separation of suspended solids, emulsions, chemical sludge or excess sludge. Traditional flotation relies on floating of solids (mainly suspended solids) on the top of the liquid by air bubbles (in conventional process they have and average diameter of 100–300 μm). Better separation effect …
Published in International Journal of Animal Biotechnology and Applications · Vol. 4, Issue 1, 2018 · pp. 1–4 Read article
-
Features of Nanoflotation Technique – A Review
Abstract: ABSTRACT Flotation method is majorly availed in two sectors: mining industry (for separation of metal ores) and in wastewater treatment process (both for municipal and industrial wastewaters) for separation of suspended solids, emulsions, chemical sludge or excess sludge. Traditional flotation relies on floating of solids (mainly suspended solids) on the top of the liquid by air bubbles (in conventional process they have and average diameter of 100–300 μm). Better separation …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 4, Issue 1, 2018 · pp. 1–4 Read article
-
Functional Rubber Particles and Their Applications- A Review
Abstract: Functional rubber powders (FRPs) are emerging as a potential class of materials derived primarily from end-of-life tires (ELTs) and other rubber scraps through mechanical, cryogenic, or de-vulcanization methods. These powders act as high-performance additives or reinforcing fillers in various engineering applications due to their low cost, improved surface properties, customizable particle sizes, and ability to undergo further chemical reactions. This review provides an overview of the production technologies, focusing on …
Published in International Journal of Chemical Separation Technology · Vol. 11, Issue 2, 2025 · pp. 8–16 Read article
-
Innovative Approaches to Molecular Synthesis for Drug Development
Abstract: The rapidly evolving field of drug development continually seeks innovative methodologies to enhance the efficiency, specificity, and scalability of molecular synthesis. This paper explores recent advancements in synthetic chemistry, focusing on techniques that have shown significant promise in addressing the challenges faced in drug discovery and development. Automated Synthesis: The advent of machine learning and artificial intelligence (AI) in synthetic chemistry has led to the development of automated synthesis platforms. …
Published in International Journal of Chemical Engineering and Processing · Vol. 10, Issue 2, 2024 · pp. 9–14 Read article
-
Perovskite Oxides: A Multifunctional Material Class for Solar-to-Fuel Energy Conversion
Abstract: Harnessing concentrated solar energy for thermochemical water and carbon dioxide splitting presents a promising pathway to produce liquid hydrocarbon fuels as a sustainable alternative to fossil fuels. This process relies on advanced redox materials to facilitate efficient chemical reactions within thermochemical cycles. Traditionally, research has focused on binary oxides, particularly ceria, due to its redox capabilities. However, ceria’s high reduction temperature and limited tunability via extrinsic doping hinder its optimization …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 11, Issue 1, 2025 · pp. 36–45 Read article
-
A Conceptual study of Metabolism wsr to metabolism of Carbohydrate,Protein and Fat
Abstract: Energy homeostasis is as critical as other vital process of body.It is produced in body by various chemical reaction that take place in each cell of living organism .Unique feature of living organism by which they extract energy from the environment and use it to carry out activities such as growth,development and reproduction.It is a common belief that Thin people have higher metabolic rate and Fat people have lower metabolic …
Published in International Journal of Nursing Critical Care · Vol. 7, Issue 2, 2021 · pp. 22–29 Read article
-
Chemical Resistance of Coconut Shell-Filled Rubber Vulcanizates
Abstract: In this contribution, the uptake of water, methanol, acetone and toluene at ambient temperature by Coconut Shell-Filled Rubber Vulcanizates as a function of time were studied. The rubber vulcanizate with varying Coconut Shell filler (CSF) concentration of 10 to 50 pphr at 10 pphr interval was prepared using two roll mixing mill and compression moulding process. The effect of filler loading on the percentage uptake of different chemicals (water, methane, …
Published in International Journal of Chemical Engineering and Processing · Vol. 7, Issue 2, 2021 · pp. 37–42 Read article
-
Review of Reactive Extraction Process for Recovery of Pyruvic Acid
Abstract: Pyruvic acid having a molecular formula (C3H4O3) is an important alpha-keto-carboxylic acid. It is mainly manufactured by biotechnological routes or chemical synthesis. There are number of applications of pyruvic acid in the industrial sector such as chemical, food, cosmetic and agriculture sector. The main problem for the production of pyruvic acid from the fermentation broth is downstream processing. The number of techniques developed to recover this acid from their aqueous …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 4, Issue 2, 2018 · pp. 1–7 Read article
-
Increased Efficiency and Shelf Life of Functional Foods Through Nanoparticle-Based Products in Food Packing and Processing Industries
Abstract: In recent years there is an upsurge in food industries as numerous food products are launched to enhance its shelf life and storage efficiency. In resolving these issues nanotechnology especially in food sector including food processing, food monitoring, food packaging, development of food modifying colors, production of functional foods, nutritional or flavoring properties according to a dietary need of a person as well as production of stronger coloring, flavorings and …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 3, Issue 2, 2017 · pp. 39–44 Read article
-
A Review on Nanotechnology for Catalysis and Solar Energy Conversion
Abstract: This roadmap on Nanotechnology for Catalysis and Solar Energy Conversion focuses on theapplication of nanotechnology in addressing the current challenges of energy conversion: ‘highefficiency, stability, safety, and the potential for low-cost/scalable manufacturing.Solar-to-fuel conversion involves using nanotechnology to improve the efficiency and effectivenessof converting solar energy into chemical fuels. Solar Water Splitting Nanotechnology is applied toenhance the process of splitting water into hydrogen and oxygen using solar energy. SolarPhotovoltaics The roadmap …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 10, Issue 1, 2024 Read article
-
Overview of Petrochemical Solid Waste Composition and Impact on the Environment
Abstract: ABSTRACTPetrochemicals refer to all those compounds that can be derived from the petroleum refinery products. Petrochemical industries impart vital role in the national economy. Environmental issues have now become important considerations due to the potential harmful impacts produced by chemical releases. Unsafe emissions may be due to improper production process, poor maintenance practices and internal operational process problems. Petrochemicals cause acute and chronic health diseases such as ulcer, allergy, cancer, …
Published in International Journal of Chemical Engineering and Processing · Vol. 6, Issue 2, 2020 · pp. 6–11 Read article
-
Fast pyrolysis of Kaner (Thevetia peruviana) Seed to Fuel and Chemicals
Abstract: Bio-energy is now considered as having the potential to provide the major part of the projected renewable energy provisions of the future. Currently non-edible seed biomass has been considered as one of the major bio energy resource. Among the different non-edible seeds such as Jatropha, Neem, Karanja, Safflower, Pomegranate, Cherry, Mahua, Cotton etc., Kaner (Thevetia Peruviana) seed plant is a very widely available even in the tropical climate. In this …
Published in International Journal of Analytical and Applied Chemistry · Vol. 1, Issue 1, 2015 · pp. 7–20 Read article
-
REVIEW OF HETEROCYCLIC COMPOUNDS AND APPLICATION FOR SUSTAINABILITY
Abstract: Heterocyclic compounds constitute the most extensive and varied group among organic compounds. Today, there are many heterocyclic compounds that are known, and as a result of extensive synthetic research as well as their usefulness in synthetic processes, this number is steadily growing. Heterocyclic molecules play a pivotal role in numerous scientific fields, such as medicinal chemistry and biochemistry, highlighting the blurred boundaries between various chemical disciplines. Heterocyclic chemistry seamlessly extends …
Published in International Journal of Analytical and Applied Chemistry · Vol. 9, Issue 1, 2023 · pp. 49–54 Read article
-
Low-graded coals to upgrade
Abstract: Coal can be defined as a chemically and physically heterogenous, “combustible”, sedimentary rock consisting of both organic and inorganic materials. Organically, coal consists primarily of carbon, hydrogen, and oxygen, with lesser amounts of sulphur and nitrogen. Inorganically, coal consists of a range of ash-forming compounds distributed throughout coal. Major types of analysis are proximate analysis, ultimate analysis and calorific value analysis. Heat value or calorific value determines energy content of …
Published in International Journal of Energetic Materials · Vol. 5, Issue 2, 2019 · pp. 42–60 Read article