Search
1067 articles for “Investigation”
-
A Theoretical Investigation of Characteristics of Diesel Engine with Coil Cooler System
Abstract: Heat exchangers are very essential devices for the industrial applications such as power plant industries, refrigeration and air conditioning systems; and automobiles systems etc. One of the sources to produce electric power is diesel engine with generator called diesel generator. Diesel is a working fluid in this system. In general diesel generators are equipped with radiators or cooling tower systems for cooling the system. For low capacity diesel generators such …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 1, Issue 2, 2015 · pp. 16–25 Read article
-
Experimental Investigations on a Diesel Engine Fueled with Biodiesel Blends and Diethyl Ether as an Additive
Abstract: Blends of bio-diesel (or diesel) are fueled for engines (diesel) though direct injection by a single cylinder at various (or multiple) propagations. The determination of the emissive power and the performance of the engine is done. The emission of the NOx is considerably high when compared to the diesel fuel operation (considering all the blends). Blends are added with the diethyl-ether at various proportions. Reduction of NOx emission at the …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 4, Issue 1, 2018 · pp. 25–33 Read article
-
Investigation various type of power plants from economic, technical and environmental aspects
Abstract: Energy plays a special role in economic growth, social welfare, improving the quality of life and security of a society. Power plants are one of the world's major energy suppliers, a set of industrial facilities that use other energy sources to generate electricity. Power plants use other forms of energy to generate electricity, such as fossil fuel energy, chemical energy, renewable energy, nuclear energy, and gravitational potential energy. There are …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 8, Issue 1, 2022 · pp. 1–9 Read article
-
Investigation On Behavior Of Cold Formed Steel In Beam Column Connections
Abstract: Cold form steel structures are used for numerous purposes in construction industry. An attempt has been made in this study to check the behavior of beam column connections by using self-tapered screw in cold form steel section theoretical, experimentally and analytically. Finally, the experimental results are compared with analytical results. This study aims at the following objective by test performed on cold formed steel section to check the behavior connections. …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 2, Issue 1, 2016 · pp. 66–70 Read article
-
Experimental Investigation of Jatropha, Karanja, Mahua and Polanga oils based biodiesel using Analysis of Variance
Abstract: The paper focused on application of ANOVA in predicting statistical model of four non-edible oils based biodiesel using design expert 6.0.8 tool. The response surface methodology using Central composite rotatable design is applied to design the experiments and the biodiesel yield of Jatropha, Karanja, Mahua, Polanga oils is to be measured. The optimum process parameters for biodiesel yield are predicted through desirability approach. It has been observed that a design …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 9, Issue 1, 2023 · pp. 1–8 Read article
-
Enhancing Electric Vehicle Range and Efficiency with Hybrid Auxiliary Energy Storage Systems: A Comprehensive Investigation
Abstract: Battery packs are the most significant and basic component of the electric vehicle system, and it therefore matters to analyse their operational metrics. Numerous Batteries that are used as energy storage devices for transporting needed energy have many upsides, such as minimal or no combustion, light weight, and more convenient charging and discharging cycles. However, when overcharged, these batteries experience many not beneficial temperature effects, as well as mechanical distortion …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 9, Issue 1, 2023 · pp. 50–62 Read article
-
Computation of Biokinetic Parameters of Total Petroleum Hydrocarbon Degradation using Vernonia amygdalina Stem
Abstract: This investigation showcases the computation of biokinetic parameters of total petroleum hydrocarbon degradation using Vernonia amygalina stem as bio-stimulant for the remediation of contaminants in loamy soil environment. The research revealed decrease in TPH degradation with increase in contact time and the percentage reduction was computed. The result shows TPH (100 dosage) > TPH (75g dosage) > TPH (50g dosage) > TPH (25g dosage) > TPH (control sample) and the …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 9, Issue 2, 2023 · pp. 26–38 Read article
-
Comparison of Some Mobile Air Compressor Components Operating in a Gas Plant Facility
Abstract: Investigation on some components of the Mobile Air Compressor (MAC) was considered in terms of the concepts of reliability and the components compared are valve, filter, radiator unit and air hose. The research reveals that failure of any of the component investigated influences the operation of the mobile air compressor in gas plant facility. The research further revealed that failure of radiator resulting from overheating in most cases, influences the …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 1, 2023 · pp. 31–40 Read article
-
A Study to Assess the Effectiveness of Nurse Assisted Milieu Activities on Activity Tolerance among Patients with Congestive Cardiac Failure at Sri Ramachandra Medical Centre
Abstract: The present study was to assess the effectiveness of nurse assisted milieu activities on activity tolerance among the patients with congestive cardiac failure at Sri Ramachandra Medical Centre with the following objectives as under: 1. Assess the activity tolerance of patients with congestive cardiac failure. 2. Assess the effectiveness of nurse assisted milieu activities on activity tolerance among patients with congestive cardiac failure. 3. Associate the background variables of patients …
Published in International Journal of Cardiovascular Nursing · Vol. 4, Issue 2, 2018 · pp. 14–23 Read article
-
Comparative Acoustical and Viscometric Study Of L-Alanine And L-Arginine in Aqueous Glycerol Medium: Effect of Side Chain Polarity and Charge On Molecular Interactions
Abstract: The acoustical and viscometric properties of L-Alanine (neutral, nonpolar) and L-Arginine (basic, charged) in 10% aqueous glycerol have been investigated over a concentration range of 0.01 to 0.1 mol·kg⁻¹ at temperatures T = 293.15, 298.15, 303.15, 308.15, 313.15, and 318.15 K under atmospheric pressure. Experimental measurements of ultrasonic velocity (µ), density (ρ), and viscosity (η) have been used to derive adiabatic compressibility (), apparent molar volume (Φv), partial molar volume …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 12, Issue 2, 2026 Read article
-
Comparative Acoustical and Viscometric Study Of L-Alanine And L-Arginine in Aqueous Glycerol Medium: Effect of Side Chain Polarity and Charge On Molecular Interactions
Abstract: The acoustical and viscometric properties of L-Alanine (neutral, nonpolar) and L-Arginine (basic, charged) in 10% aqueous glycerol have been investigated over a concentration range of 0.01 to 0.1 mol·kg⁻¹ at temperatures T = 293.15, 298.15, 303.15, 308.15, 313.15, and 318.15 K under atmospheric pressure. Experimental measurements of ultrasonic velocity (µ), density (ρ), and viscosity (η) have been used to derive adiabatic compressibility (), apparent molar volume (Φv), partial molar volume …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 11, Issue 2, 2026 Read article
-
THE STUDY OF DIELECTRIC PERMITTIVITY OF NINPs-PDMS
Abstract: Nickel–polydimethylsiloxane (Ni–PDMS) nanocomposites were fabricated to investigate the influence of metallic nanoparticle loading on the dielectric behavior of flexible polymer matrices. Nickel nanoparticles with controlled size distributions were dispersed in PDMS using solution blending and curing protocols optimized to minimize agglomeration. The dielectric permittivity and loss tangent of the resulting nanocomposites were measured across a broad frequency range (typically 10²–10⁶ Hz) and at varying filler volume fractions. Results show a …
Published in International Journal of Electrical Power System and Technology · Vol. 11, Issue 2, 2025 · pp. 39–50 Read article
-
Optimizing Die Life in Hot Forging: A Comprehensive Review of Improvement Methods
Abstract: Abstract: The wear investigation on die inserts utilized in the hot forging method to create a yoke type forging—an element that makes up passenger car steering systems—is presented in this paper. In order to provide a quick and accurate wear examination of the forging tools (of complex forms), the investigation used an innovative reverse scanning technique that eliminates the need to remove the tools from the producing unit. The study …
Published in International Journal of Computer Aided Manufacturing · Vol. 11, Issue 2, 2025 · pp. 62–67 Read article
-
Design and Implementation of Circular PolarizedPatched Antenna for 5G Applications
Abstract: The need for high-performance antennas in 5G technology is discussed in this research. It describesthe layout and enhancement of a circular polarized patch antenna, considering feed structure,substrate material, geometry, impedance matching, and gain enhancement. Modern manufacturingtechniques are used to construct the antenna, which is designed using sophisticated electromagneticsimulation techniques. The intended antenna can span a wide variety of angles in both vertical andhorizontal directions. This study investigates the effects of …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 10, Issue 1, 2024 · pp. 37–44 Read article
-
A Look on How Microalgae Could Be Used to Make Biofuel
Abstract: Algae's potential as a reliable biofuel source has been widely investigated. The research confirms the various steps of biofuel production and sheds light on third-generation biofuels. With a detailed investigation of the growth, extraction, and processing operations to the finished product, microalgae have now been recognised as a remarkable resource. Such in examination of translation procedures as well as the issues that arise from them is provided. Major approaches are …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 8, Issue 1, 2022 · pp. 13–17 Read article
-
Rheological Study of Waste Polyethylene Terephthalate with Bitumen Mix in Pavement Construction
Abstract: Plastic bags which are composed of polyethylene terephthalate (PET) is commonly used as for soft drink, water bottles and many other applications. However, disposal of this waste PET in large quantities constitutes an environmental problem, as it is considered as non-biodegradable materials. This study investigated rheological study of waste PET to be mixed with bitumen use as a raw material for pavement construction. The effect of temperature was varied from …
Published in International Journal of Chemical Separation Technology · Vol. 4, Issue 1, 2018 · pp. 36–48 Read article
-
Comparison of Liquefied Natural Gas Plant Unit Failure
Abstract: The comparison of some liquefied natural gas plant unit failure was investigated and the unit considered in terms of identification of the component failures. The units are Reboiler, Stripper, Cooling, Compressor, Acid Dehydration, Heat Transfer, Expander and Liquefaction units. The components of interest were monitored in terms of their performance as well as the failure rate of heat transfer unit > cooling unit > acid dehydration unit > stripper unit …
Published in International Journal of Chemical Separation Technology · Vol. 7, Issue 2, 2021 · pp. 11–22 Read article
-
Elucidation of Synthetic Mechanism Involved in the Conversion of Zwitterionic Clonixin to Carboxamide Side-Product
Abstract: N-(3-Chloro-2-methylphenyl)-2-oxo-1,2-dihydropyridine-3-carboxamide is obtained as a by-product during the synthesis and crystallization of Clonixin (2-(3-chloro-2-methylanilino)nicotinic acid) and its polymorphs, respectively. This conversion was unexpected and it changed the usual investigation path way enabling the formation of neutral and zwitterionic polymorphs in our study on Clonixin in contrary to studies of 2-(p-tolylamino) nicotinic acid investigation. The same conversion is checked in the other synthesized analogs such as 2-(phenylamino)nicotinic acid (PNA), 2-(methyl(phenyl)amino)nicotinic acid …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 2, Issue 1, 2016 Read article
-
Review on Preparation and Applications of Formazan Compounds
Abstract: The objective of the survey designated in this study is to predict the redox-active feature of formazan derivatives. To realize this purpose, preparation processes and investigation approaches of the formazan derivatives are developed. The redox properties of formazan derivatives were identified via electrochemical approaches and the first samples of isolated and well-investigated formazan products are designated in this review. Formazan derivatives (as a dyes) are synthetic chromogenic yields of the …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 5, Issue 2, 2019 · pp. 23–33 Read article
-
Effect of variation of Elevated Temperature on Compressive Strength of Metakolin concrete
Abstract: It has been found that high early temperature has negative impacts on later compressive strength of concrete. Some researchers investigated the adverse effect on long term strength of concrete due to high initial temperature. The effect of temperature on different properties of concrete is considerable and remained the subject of research activities of a lot of researchers. Different investigators moved in different ways and investigated temperature effect by changing different …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 9–16 Read article