Search
296 articles for “fabrication”
-
Porous Silicon and its Nanoparticles: A Theoretical Study
Abstract: It is very simple and cost consuming technique of fabrication of porous silicon film over silicon substrate and synthesizing the porous silicon and silicon nanoparticles. The etch reactions in RIVPSE process forms the porous structures without need of complex and expensive equipments. The luminescent porous film can be fabricated using this sample technique with any cost effecting methods such as extra energy excitation like plasma or ultraviolet photon and additional …
Published in International Journal of Applied Nanotechnology · Vol. 5, Issue 1, 2019 · pp. 14–18 Read article
-
Short Report on the Passive Microfluidic Flow of Ethanol towards Nanofluidics in Nanotechnology
Abstract: In this experimental work, a single gradual expansion microchannel is fabricated by polymethylmethacrylate (PMMA) as polymeric material using author’s own hands-on in the maskless lithography, hot embossing lithography, and direct bonding technique. Dyed ethanol is prepared as working liquid. A CMOS camera catching 25 frames per second with a corresponding time-scale resolution of 0.04 second is used by author to record the surface-driven microfluidic flow of dyed ethanol in the …
Published in International Journal of Applied Nanotechnology · Vol. 7, Issue 2, 2021 · pp. 13–17 Read article
-
Study and Implementation of High Performance Energy Harvester using Aerosol Deposition Method.
Abstract: This paper reports the high-performance piezoelectric energy harvester (EH) fabricated with PbxZr1-xTiO3 (PZT) or xPb(Mg1/3Nb2/3)-(1-x)PbTiO3 (PMN-PT) by aerosol deposition method. The other EH with the same construction and similar thickness of PZT thin film are fabricated and used as a comparison basis. The electrical and mechanical properties of both transducers are characterized and discussed. According to our previous work [1], the output power of a EH not only depends on …
Published in International Journal of Energetic Materials · Vol. 4, Issue 2, 2018 · pp. 28–33 Read article
-
The Effect of Carbon Percentage on Structural Steel’s Compressive and Tensile Strength: A Literature Survey
Abstract: The fundamental necessity of this survey is to check the enhancement of the strength, hardness, dimensional stability and wear resistance by passing them through the cold temperature that enhance the hardness of the substance as a result of the increment in which it took place within the proportion of primary solid solution within the structure. If the type of methods mentioned in the article are employed in manufacturing and production …
Published in International Journal of Metallurgy and Alloys · Vol. 1, Issue 2, 2015 Read article
-
Microscopic Avengers: The Rise of Nanorobots in Biomedical Engineering
Abstract: Nanorobotics is an emerging field at the intersection of nanotechnology and robotics, offeringa promising new frontier in biomedical engineering. Nanorobots, at the scale of a fewhundred nanometres, are designed to perform a variety of tasks within the human body,ranging from targeted drug delivery to precise surgical procedures. This article explores theevolution, design, functionality, and applications of nanorobots in biomedical engineering,highlighting their potential to revolutionize healthcare.The evolution of nanorobots has seen …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 2, 2023 · pp. 10–15 Read article
-
Short Review on the Classification of Micromixers
Abstract: Miniaturisation of micron-scale devices produces advantages in analytical chemistry and life science. Micromixers are being used in modern microfluidic systems to facilitate the laboratory-scale operation in small microchips towards the production of microfluidic laboratory-on-a-chip systems for global-market. Polymers are proved to be suitable materials for the fabrication of micromixers. Passive micromixers have the advantage of simple designs and low cost of fabrication. Micromixers have the applications in analytical chemistry and …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 1, 2018 · pp. 1–3 Read article
-
Finite Element Analysis of Composite Tube
Abstract: Abstract – In many industries, composite tubes are preferable than other materials, like, aluminum, steel, wood, iron. The durability, strength, stiffness, weather and corrosion resistance of the tubes are required properties in industries. It is fabricated in several layers depending on their functions. In this study, composite tube is modeled using ANSYS software by changing material properties and layer orientation. ANSYS can predict results before fabricating composite sample. The meshed …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 48–59 Read article
-
Studies of meta-materials
Abstract: AbstractMeta-materials are artificial composites designed to operate electromagnetic property. Properties of wave nature manipulation have originated fashioned fabrication. This has to perform as rigorous as subjected under adoption specific optical or microwave or acoustic provision. Fabrication has precision formof shape, geometry, size, orientation and arrangement of materials.Applicationof meta-materialsincludes super resolution imaging and optical as well acoustic sensing. Decay, separate and couple among as split transverse electric and magnetic to that …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 47–52 Read article
-
Developments of Photonic Ferroelectric Ceramic Compose
Abstract: This article is a study of imposed interposed crystal allotropic modification underexposure of electricity. Ferroelectric photonic ceramic powder and films are usual studied in preparation from adoptive transduction in the same crystal based on electrical gradient. Ferroelectric ceramics and thin films used to be processed by the sol-gel method, where empirical variables of interest have been their chemical composition, constituent phases, and microstructure. Functional attributes made metal oxide compose like …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 37–44 Read article
-
MODELLING OF SAW PARAMETERS AND ITS MECHANICAL PROPERTIES FOR JOINING STRUCTURAL STEELS
Abstract: Ethiopia nearly 85 per cent of people is morality depends on agriculture; the government of Ethiopia emphasis on Farm Mechanization for bringing the improvement in crop production using modern equipment and tools. However, the Modern equipment development needs improved machineries for fabrication. Moreover, the metal joining technology; like Submerged Arc Welding (SAW) available is very advance and made welding of thicker plats and welded structures. Therefore, while using this modern …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 2, 2018 · pp. 34–43 Read article
-
Experimental Demonstration on Polymer based Microfluidics
Abstract: In this experimental work, a single polymer based gradual expansion microchannel is designed. This microchannel is fabricated by the maskless lithography, hot embossing lithography and direct bonding technique inside the cleanroom laboratory. Dyed water is the prepared working liquid in this work. The surface-driven (passive) microfluidic flow of dyed water is recorded in the fabricated device using a CMOS camera catching 25 frames per second with a corresponding time-scale resolution …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 1, 2021 · pp. 23–26 Read article
-
Review of Composites formed of Thermoplastic as Organic Fibers
Abstract: Composites made of structural monomers gave rise to thermoplastic polymers (TMCs). Due to their usage of a thermoplastic matrix, these materials really aren't chemically reactive. TMCs may be remoulded without degrading when heated and become softer. They harden into the final shape when they cool. Thermoplastic materials bonded with plant fibers may one day be used to create impact- absorbing structure for renewable power. Its impact features of organic fiber-reinforced …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 28–33 Read article
-
Experimental and Finite-Element Analysis of Tee Joint’s Stiffness Characteristics of A3003 Honeycomb Core Sandwich Panels
Abstract: Aluminum honeycomb is used as a core material for sandwich panels of floors, roofs, doors, partitions, working surfaces for automatic machines, and for all products which require high degree of flatness and optimal stiffness-to-weight ratio. Invariably, in the fabrication of the above panels, butt and tee joints are encountered so as to get the required complex shapes. In this paper, various edging and configuration details that have been used to …
Published in International Journal of Mechanics and Design · Vol. 4, Issue 2, 2018 · pp. 21–29 Read article
-
Eco-Friendly Starch-Iron-Oxide Nanoblends from Fruit Peel Waste – A Green Waste Valorization Approach
Abstract: Utilization of agricultural wastes for production of useful biomaterials has attracted a lot of interest due to their environmental and economic benefits. In the present study, green banana peels were used as bio sustainable raw materials from which starch was extracted, and pomegranate peels were used as an ecofriendly raw material for the green synthesis of iron oxide nanoparticles. The green banana peels were also found to be a potential …
Published in International Journal of Green Chemistry · Vol. 12, Issue 2, 2026 · pp. 29–39 Read article
-
Photo-Catalytic Degradation of Dyes Using Graphene Oxide–Dithizone Composite
Abstract: Graphene oxide–dithizone (GO–DTZ) composite was successfully synthesized through the copolymerization of graphene oxide and dithizone to develop an efficient photocatalytic material for wastewater treatment. The dithizone polymer was prepared using a 1:2 molar ratio, while graphene oxide was synthesized via the modified Hummers’ method to obtain highly oxidized graphene sheets with abundant oxygen-containing functional groups. The GO–DTZ nanocomposite was fabricated by ultrasonically dispersing graphene oxide with the synthesized dithizone polymer …
Published in International Journal of Analytical and Applied Chemistry · Vol. 12, Issue 2, 2026 · pp. 46–53 Read article
-
Synthesis and Characterization of Polymer-Based Organic–Inorganic Hybrid Materials viaSol–Gel Processing: A Review of Gelatin–Silica, Gelatin–Silica–Titania and HPMA-Based Systems
Abstract: Organic–inorganic hybrid materials have emerged as a versatile class of advanced materials that integrate the flexibility and functionality of organic polymers with the thermal, mechanical, and chemical stability of inorganic networks. Among the available fabrication routes, the sol–gel process has gained considerable attention because of its simplicity, low processing temperature, compositional flexibility, and ability to tailor material properties at the molecular level. The present review discusses the synthesis and characterization …
Published in International Journal of Polymer Science and Engineering · Vol. 12, Issue 2, 2026 Read article
-
Revolutionizing Bone Grafting: A Survey of 3D Printed Solutions
Abstract: Due to the limits of conventional grafts, large bone deficiencies resulting from illness or trauma continue to be a significant clinical challenge. Autografts, while osteoconductive and osteoinductive, are limited by donor availability and morbidity, and allografts/xenografts carry risks of immune rejection and disease transmission. In contrast, 3D printing (additive manufacturing) enables fabrication of patient-specific bone scaffolds with controlled architecture, composition, and bioactivity. Using techniques, like selective laser sintering (SLS), stereolithography …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 2, 2026 · pp. 16–23 Read article
-
Heritage-Sensitive Redevelopment of Bhuleshwar,Mumbai: A Sustainable Urban Development Approach
Abstract: Bhuleshwar, one of the oldest commercial precincts in South Mumbai, represents a unique urban landscape where traditional markets, religious institutions, historic architecture, and craft-based economies coexist within a dense mixed-use environment. Renowned for its imitation jewellery trade, flower markets, textile shops, and temple precincts, the area serves as an important cultural and economic hub. However, rapid urbanization, aging infrastructure, overcrowding, traffic congestion, deteriorating building conditions, inadequate sanitation, and redevelopment pressures …
Published in International Journal of Architectural Heritage · Vol. 9, Issue 2, 2026 Read article
-
Integrating 3D Printing Technology in Sustainable Interior Design forEnhanced Human Comfort and Environmental Stewardship
Abstract: As people spend nearly 70% of their time indoors, the quality of interior environments has a significant impact on human comfort, health, and overall well-being. Many indoor spaces are negatively affected by pollutants and toxins originating from construction materials, furnishings, surface finishes, and inadequate ventilation, often contributing to issues such as Sick Building Syndrome (SBS). Enhancing indoor environmental quality (IEQ) has therefore become a critical concern within sustainable design. This …
Published in International Journal of Sustainable Building Technology · Vol. 9, Issue 2, 2026 · pp. 13–18 Read article
-
Evolution of Mobile Wireless Generations and the Architectural Foundations of AI-Integrated 6G Networks
Abstract: Wireless communication has moved through five complete technology generations in roughly four decades, and each transition has reshaped how societies exchange information, run businesses, and design cities. This paper is the first instalment of a two-part review and concentrates on the historical arc of that journey, tracing the defining traits, benefits, and shortcomings of 1G through 5G before turning to the architectural groundwork on which sixth-generation (6G) networks are being …
Published in International Journal of Digital Communication and Analog Signals · Vol. 12, Issue 2, 2026 Read article