Search
2000 articles for “3-phenyl-2-propen-1-ol” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Optimization of Active Cutting Power Consumption by Taguchi Method for Rough Turning of Alloy Steel
Abstract: In this study, the active cutting power consumption (ACPC) is optimized as it is usually the major factor of the electricity bills in machining operations. The EN 353 alloy steel is used as workpiece material during rough turning while varying cutting parameters and nose_radius. The experiments were conducted in accordance with the Taguchi’s L-27 standard arrangement and the interactions between parameters were also considered with tungsten carbide inserts. The optimum …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 1, 2020 · pp. 37–45 Read article
-
Assessment on the Effecs of Sodium Salts of Tungstate and Nitrite as Green Inhibitor for the Corrosion of Cr–5Ni–53W Alloy in 0.5 M NaCl Solution
Abstract: Corrosion inhibition effect of sodium salts of tungstate and nitrite on the sputter-deposited ternary Cr–5Ni–53W alloy was investigated in 0.5 M NaCl solution open to air at 25±1 °C using corrosion test, inhibition mechanism and corrosion potential measurement. The use of sodium salts of both the tungstate and nitrite enhanced the corrosion resistance properties of the ternary alloy in 0.5 M NaCl solution, mostly due to tungstate and nitrite ions …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 1, 2020 · pp. 25–36 Read article
-
Comparative Study of the Nature of Slag in the Formulation of Concrete Pavers
Abstract: The steel mill generates about 8000 tons/year of slag by transforming scrap metal to produce more than 60000 tons/year of wire rod and steel reinforcing bars. These co-products are stored or used for backfill. With this almost inexhaustible slag deposit, Morocco has a valuable resource thanks to its high content of silicates, lime and metal oxides. This has led to the attempt to valorize it in the manufacture of paving …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 12–27 Read article
-
Formulation and Characterization of Polyhydroxyalkanoates Copolymer Nanoparticles for Controlled Drug Release
Abstract: The present study was focused on the formulation of polyhydroxyalkanoates copolymer nanoparticles (PHANPs) for in vitro controlled release of the drugs, viz. levofloxacin and amoxicillin. The PHANPs were synthesized by a triple emulsion method and conjugated with amoxicillin and levofloxacin to improve its remedial bioavailability. The PHANPs and drug conjugatedPHANPs were analysed using Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR) spectroscopy and X-Ray Diffraction (XRD). The cell viability % …
Published in International journal of Nanobiotechnology · Vol. 6, Issue 2, 2020 · pp. 1–11 Read article
-
Design and Evaluation of Ethionamide as Dry Powder Inhaler for Pulmonary Administration
Abstract: Ethionamide nanosuspension was prepared using Tween-80+ Span-80 as surfactant. Ethionamide nanoparticles were prepared using method known as media milling Method. Method to reduce dose and control frequency. It is further developed as a dry powder inhaler, making it suitable for lung control and the residence time of the drug in the lungs is prolonged. Ethionamide nanoparticles were prepared by ambient grinding method. The freeze-dried and anhydrous lactose-free nanoparticles were mixed …
Published in International journal of Nanobiotechnology · Vol. 9, Issue 1, 2023 · pp. 1–17 Read article
-
Action Potential Monitoring Using Neuronanorobots: Neuroelectric Nanosensors
Abstract: Neuronanorobotics, a key future medical technology that can enable the preservation of human brain information, requires appropriate nanosensors. Action potentials encode the most resource-intensive functional brain data. This paper presents a theoretical design for electrical nanosensors intended for use in neuronanorobots to provide non-destructive, in vivo, continuous, real-time, single-spike monitoring of action potentials initiated and processed within the ~86 x 109 neurons of the human brain as intermediated through the …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 1, Issue 2, 2015 · pp. 20–41 Read article
-
Correlation for Photocatalytic Degradation Kinetics of Carboxylic Acids by Electrochemically Synthesized Cd/ZnO Nanoparticles and Study of Antibacterial Behaviour
Abstract: Cd/ZnO nanoparticle has been successfully synthesized by electrochemical method which is simple and inexpensive method. The synthesized Cd/ZnO nanoparticle was used has a catalyst for the photodegradation of Oxalic acid, Chloroacetic acid and Formic acid under various experimental conditions by volumetric method. The Cd/ZnO nanoparticles were characterized by various techniques such as SEM-EDAX, UV-Visible spectroscopy, FTIR-IR spectrum and X-ray diffraction studies. The study of UV-Visible spectroscopy revealed that the Cd/ZnO …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 6, Issue 2, 2020 · pp. 1–16 Read article
-
Comparative study of the Magnetoelectric Properties in Core-Shell Nanocomposites as well as mixture of CoFe2O4:BaTiO3
Abstract: Nanostructures of multiferroic materials have been drawing increasing curiosity due to the boosted magnetoelectric coupling and potential for succeeding generation multifunctional devices. Composites of ferroelectric and magnetostrictive materials indicate more magnetoelectric coupling than single phase materials. Core-shell CoFe2O4:BaTiO3 nanocomposites (1:1 weight ratio) and a mixture of both of them have been produced by a combination of hydrothermal and sol gel techniques. X ray diffraction analysis endorses the presence of both …
Published in International Journal of Composite and Constituent Materials · Vol. 1, Issue 1, 2015 · pp. 1–6 Read article
-
Computation of Gas Turbine System as Renewable Energy Conversion Mechanisms
Abstract: In the present work thermo-economic analysis of a cogeneration cycle is carried out so that any power generation industry can choose best power generation system out of the choices available with organisation. Mathematical modeling for the cost evaluation of each component is developed and results are obtained with computational programming tool EES (Engineering Equation Solver). Form results it is being found that with change in combustion chamber outlet temperature or …
Published in International Journal of Composite and Constituent Materials · Vol. 2, Issue 1, 2016 · pp. 10–15 Read article
-
Thermal Material Used in Aerospace for Protection
Abstract: Ablative nanocomposites were set up by fusing multiwall carbon nanotubes (MWCNT) into phenolic gum and after that impregnating them into rayon-based carbon texture. MWCNT were mixed into phenolic gum at 0.5, 1, and 2 wt% loadings utilizing a mix of sonication and high shear blending to guarantee uniform scattering of MWCNT. The composite test examples were tried by utilizing an oxyacetylene test bed (OTB) applying a warmth flux of 1000 …
Published in International Journal of Composite and Constituent Materials · Vol. 2, Issue 2, 2016 · pp. 1–2 Read article
-
Mechanical Behavior of AA7075/Glass Fiber Reinforced Polymer Composites
Abstract: This paper reports on the mechanical properties of As-cast and heat-treated AA7075 polymer composites reinforced with glass fibers from 1 to 5 wt%. The polymer composites were fabricated using the Compo casting method, in which short glass fibers were introduced into the vortex created in the molten alloy through an impeller rotated at 500 rpm. The molten mass was thoroughly stirred and poured into permanent molds and squeezed under pressure. …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 2, 2020 · pp. 11–20 Read article
-
Plant-drive Waste Fiber Reinforced Thermoplastic Composites: Modification of Fiber Surface Treatment
Abstract: Plant fibers are being utilized more frequently to create polymer composite parts for the aerospace, construction, and automotive industries. The increased awareness of the toxicity of synthetic fibers is what has caused a rise in the use of plant fibers across a variety of industries. It is crucial to emphasize that "Earth needs humans, not humans need earth," hence decision-makers and researchers are working to replace conventional materials with eco-friendly …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 1, 2023 · pp. 14–23 Read article
-
Experimental Investigation on Tensile Properties of Al6061-Graphite Particulate Composites
Abstract: This paper presents the experimental work carried out on the tensile behavior of aluminium 6061 (Al 6061) graphite particulate composites. The required specimen are prepared using stir casting method with graphite proportions ranging from 3 to 12 % by weight. The mechanical behavior of Al 6061 graphite particulate composites produced using stir casting method, was investigated by conducting experiments on Universal Testing Machine (UTM). Tensile specimens were utilized for tensile …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 2, 2015 · pp. 1–8 Read article
-
Effect of Addition of Phosphates on Thermal, Physical and Mechanical Properties of Phenolic and Amino Bonded Wood Composite
Abstract: Properties of flame retardant molecule board made by treating the molecule (crowded deltoids) with mono ammonium hosphate/diammonium phosphate (MAP/DAP) creation were examined. Two convergences of (0, 1, and 2%) of flame retardants ere joined to the particles on broiler dry weight of the particles. Melamine Urea Formaldehyde tar (MUF) and phenol formaldehyde pitch (PF) were utilized to produce the exploratory boards. The fire retardancy and warm strength of the composites …
Published in International Journal of Composite Materials and Matrices · Vol. 2, Issue 1, 2016 · pp. 8–14 Read article
-
Effect of Some Physical Properties on the Swelling Behaviour of Biomass Membranes
Abstract: The membranes of Detarium microcarpum seeds (DMS) and Alfzelia africana seeds (AAS) were developed. The water uptake capacities for DMS and AAS were found to be 500% and 390% respectively. The percentage of water uptake by Detarium microcarpum membrane and Alfzelia africana membrane, both increased with increased in the concentration of DMS and AAS as well as pH. The effect of contact time on water uptake showed that the water …
Published in International Journal of Composite Materials and Matrices · Vol. 2, Issue 2, 2016 · pp. 8–15 Read article
-
Investigating Pipeline Integrity Failure as a Result of Corrosion
Abstract: The study reviewed different failure factors and data of onshore crude oil pipelines covering corrosion, external interference, structural defects, and operators’ errors. The focus of this research is to identify factors affecting failure of crude oil pipelines in Nigeria due to corrosion with analysis of failure data from 2008–2017. Corrosion (internal and external) over total length of available pipelines for each year was analysed to determine the current mean time …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 2, 2021 · pp. 1–8 Read article
-
Enhancement of Fire Retardancy Properties of Plywood by Incorporating Silicate, Phosphate and Boron Compounds as Additives in PMUF Resin
Abstract: Wood is one of the supreme sustainable, naturally growing materials that consist principally of combustible organic carbon compounds. Since plywood are widely used now a day especially in buildings, furniture and cabinets. Since the demand of plywood with fire retardancy properties has been increasing over last years, the objective of this study is to improve the fire retardancy of Wood Panel Products by adding Tricresyl phosphate, Di-Sodiumocta Borate and Sodium …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 · pp. 11–15 Read article
-
Study of PLA and its Synthesis Kinetics
Abstract: In this project we studied about Polylactic Acid and its production kinetics. The most often found optically active hydroxycarboxylic acid is lactic acid (LA, also known as 2-hydroxypropionic acid). In the form of L-and D-Lactic Acid, this chiral molecule may be found. The building blocks of polylactide are carboxylic acid monomers produced by fermentation of sugars from renewable sources, such as sugar cane, beet root, or corn starch. These sugars …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 16–27 Read article
-
Design and Fabrication of Drainage Water Filter
Abstract: For this project, the idea of the proposal is to replace the manual work on drainage water filtration and cleaning with an automated system. We know that water has great value to human health, drainage is full of waste such as polythene, bottles, etc. The drains are shut off due to this dirt in the water. The drains are used for dumping and unfortunately sometimes there can be a loss …
Published in International Journal of Mechanics and Design · Vol. 6, Issue 1, 2020 · pp. 6–11 Read article
-
A review on the Solar Still
Abstract: In present scenario the problem of clean potable water is very crucial. Due to adverse weathercondition the potable water is not available in the required quantity. The available water is brackishand to convert that in to fresh water is the main requirement in present scenario. As per the report byWHO and UNICEF the improved quality of water is used by 91% world population. Due to rapidindustrialization and urbanization the requirement …
Published in International Journal of Mechanics and Design · Vol. 8, Issue 2, 2022 · pp. 1–6 Read article