Search
17 articles for “ASTM standards”
-
Mechanical Characterization using Finite Element Analysis of Jute and E-Glass Fabric Reinforced Epoxy Composite Materials
Abstract: Recently, there has been a greater inclination towards natural fiber reinforced plastics composites (NFRPC) because these are environmentally friendly and cost-effective to synthetic fiber reinforced composites. The availability of natural fibers and ease of manufacturing have tempted researchers worldwide to try locally available inexpensive fibers and to study their feasibility of reinforcement purposes and to what extent they satisfy the required specifications of good reinforced polymer composite for tribological applications. …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 2, 2020 · pp. 21–39 Read article
-
Taguchi based validation of wear prediction for Zirconium dioxide particulate reinforced Aluminium 7068 composites
Abstract: The current work emphasis on the tribological characterization of Zirconium dioxide (Zirconia, ZrO2) particulates reinforced Aluminium 7068 metal matrix composites for different process variables established following design of experiments methodology and consequent taguchi based validation techniques for wear prediction. The pin on disc wear test is carried out on specimens fabricated enroute ultrasonic assisted stir casting with controlled dispersion of 12 Wt.% of ZrO2 and subsequent machining of the castings …
Published in International Journal of Metallurgy and Alloys · Vol. 4, Issue 1, 2018 · pp. 37–50 Read article
-
Study of the effect of Silicon oxide nanoparticles in the copper alloy
Abstract: The main objective of this paper is to study the effect of the Silicon oxide nano particles in the copper alloy which is manufactured by using the stir casting process and samples are prepared as per the ASTM standards. These specimens are tested under the mechanical tests. Due to blending of the nanoparticles the properties of copper alloy will be enhanced. so uniform ASTM samples with varying composition of nano …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 24–31 Read article
-
Preparation and Characterization of Double Step StirCusted Aluminum Hybrid Composite Reinforced with RHA and Si3N4 Micron Particles
Abstract: Abstract: The improvement of the mechanical and tribological characteristics of composites is always a crucial area of research for materials scientists. Nowadays, particulate aluminum matrix hybrid composites, known as particle-reinforced hybrid aluminum matrix composites (PHAMCs), are becoming more popular due to their desirable properties, cost-effectiveness, ease of processing, and compatibility withtraditional processing techniques. In this current study, a two-step stir casting method was utilized tocreate aluminum hybrid composites using Al6061 …
Published in International Journal of Manufacturing and Materials Processing · Vol. 10, Issue 1, 2024 Read article
-
Biodiesel production using waste cooking oil: influence of catalysts on reaction parameters
Abstract: Over a century ago, Rudolf Diesel tested the used of vegetable oil as fuel for his automotive engine, several years later, bio-based diesel obtain from trans-esterification of animal fats or vegetable oils in presence of catalyst have been used as alternative automotive fuels to safe guard the environment and avoid global warming. Cost of production process has limited the diversification and generalizes usage of biodiesel, thus exploring avenues for cost …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 7, Issue 1, 2021 · pp. 1–8 Read article
-
Comparative Study on Production and Characterization of Bioethanol from Agricultural Waste Materials
Abstract: Production and characterization of bioethanol from lignocellulosic substrates that include sugarcane bagasse, corn cob and cassava peels were investigated in this research study. The raw materials (sugarcane bagasse, corn cob and cassava peels) were sorted, washed, cleansed to remove dirts and dried to remove moisture contents, and crushed into ground form to increase substrate’s surface area of contacts and sieved through a mesh size of 2 mm. The bioethanol distillates …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 8, Issue 2, 2022 · pp. 1–9 Read article
-
Analysis of Mechanical and Corrosion Properties of AISI50110 (EN31) Steel With and Without Heat Treatment
Abstract: The mechanical properties of steel decide its applicability for a particular condition. Heat treatment processes are commonly used to enhance the required properties of steel. The material was machined to ASTM standards and then different tests like microstructure analysis, hardness test, impact test, etc. were carried out after the heat treatment processes. All the tests were carried out in the mechanical workshops and laboratories under the supervision of their respective …
Published in International Journal of Metallurgy and Alloys · Vol. 1, Issue 1, 2015 · pp. 24–41 Read article
-
Development of Epoxy Based Hybrid Composite Reinforced with Jute and Glass-fiber and Effect of Silicon Carbide additive on it’s Mechanical Properties
Abstract: In this project, an effort is made to compare the improvement of the matrix material properties because of the presence of the fillers and additives. Initially, hand lay-up process was carried out in a mold of known dimensions to layup jute fibers of varying weight percentages in the epoxy matrix. Another composite with glass fibers of similar weight percentages to that of jute were laid up in epoxy matrix in …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 2, 2018 · pp. 8–12 Read article
-
Influence of Concentration Variation of Chemical Pre Treatments on Tensile Properties of Coir Fibre Reinforced Composites
Abstract: Composite material consisting randomly oriented coir fibres and epoxy resin have been studied. This study tends to analyze the tensile properties of coir fibre (10mm length) reinforced with epoxy resin by treating with Na0H and KMn04 of different concentrations. Fibers are bonded together with epoxy resin by hand layup process and cured at room temperature for 24 hours to form composite. Different tensile properties of composite were investigated in accordance …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 2, 2018 · pp. 13–20 Read article
-
Thermal and structural properties of surface treated ragweed fiber reinforced biodegradable polylactic acid biocomposites
Abstract: Natural fiber-reinforced composites (NFRC) are becoming more popular as technological advance recognizes the need for eco-friendly materials. This work presents Giant ragweed (Ambrosia trifida) as a new composite reinforcement material into polylactic acid (PLA) matrix to form novel natural fiber-reinforced composites. Different types of retting techniques are utilized, and hydrogen peroxide retting is proven to provide the most optimized properties. The fibers are taken through subsequent extraction and grinding processes. …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 2, 2022 · pp. 13–31 Read article
-
Sliding wear behavior of plasma sprayed NiCrAlY-WC based composite coatings on AA5083 alloy
Abstract: WC based coatings was deposited by thermal spray process have been extensively used in industrial application to counter abrasive type of wear. In this study, for the first time NiCrAlY-WC based composite coatings were deposited on AA5083 substrate by plasma sprayed coating technique. The composite coatings were characterized by optical microscopy (OM), scanning electron microscopy (SEM) and microhardness. Sliding wear behavior of coated and uncoated samples was carried out on …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 21–26 Read article
-
Analysis of Mechanical Attributes of Nano clay Reinforced Polymer Composites
Abstract: Composite material provide a Higher and unique mechanical and physical attributes because of its combines the most unique attributes of its composition while underlying their least advantageous attributes . Composites have been widely used in various application starting from aerospace , Manufacturing plants , Electrical equipment's , Marine , Automotive ,Civil Infrastructure , Corrosive Environment’s ,Whereas the Epoxy which are the cured components of two chemical functional group namely polyepoxides …
Published in International Journal of Manufacturing and Materials Processing · Vol. 7, Issue 1, 2021 Read article
-
Impact, Flexural, and Hardness Properties of AISI 1018 Mild Steel Butt Joint Welded using Gas Metal Arc Welding (GMAW) under Various Welding Parameters
Abstract: AbstractThe effects of welding parameters such as welding current, voltage, and travel speed on the impact, flexural, and hardness properties of AISI 1018 mild steel using Gas Metal Arc Welding (GMAW) were investigated. In this research, specimen sizes of 500 mm x 10 mm x 10 mm and 5.5 mm x 10 mm x 10 mm were fabricated according to ASTM standards. In addition, a v-groove had been prepared at …
Published in International Journal of Manufacturing and Materials Processing · Vol. 8, Issue 1, 2022 · pp. 6–13 Read article
-
Mechanical and Thermal Characterization of Natural Fiber-Reinforced Epoxy Composites for Structural Applications
Abstract: Natural fiber reinforced polymer (NFRP) composites have emerged as promising alternatives to conventional synthetic fiber composites owing to their environmental sustainability, low density, and competitive specific mechanical properties. However, a comprehensive and simultaneous evaluation of both mechanical and thermal performance of jute/sisal hybrid natural fiber epoxy composites under systematic fiber treatment conditions remains insufficiently addressed in the literature. The present study investigates the mechanical and thermal characterization of jute and …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 1, 2026 · pp. 37–48 Read article
-
Reactive Separation for Biodiesel Purification Using Hybrid Membrane Systems
Abstract: Biodiesel produced through transesterification typically contains several impurities, including residual glycerol, unreacted methanol, soaps, water and homogeneous catalysts, all of which reduce fuel quality and hinder compliance with EN 14214 and ASTM D6751 standards. Conventional purification techniques such as water washing, centrifugation and vacuum distillation are energy-intensive, generate large volumes of wastewater and often fail to efficiently remove polar contaminants. To overcome these limitations, this study examines a reactive separation …
Published in International Journal of Chemical Separation Technology · Vol. 11, Issue 2, 2025 · pp. 17–30 Read article
-
Optimization Process Parameters of Manganese Phosphate coating developed on En-19 Steels by Statistical Design of Experiment
Abstract: Phosphating is a chemical conversion process in which constituents of a metal surface with a view to produce thin adherent protective coating of insoluble crystalline phosphate by reaction with phosphoric acid solution. This conversion coating should have strong interfacial adhesion and porous enough. The growth of phosphate coating is influenced by method of cleaning of metal surface to be treated before treatment, use of surface activating rinses and acid or …
Published in International Journal of Metallurgy and Alloys · Vol. 2, Issue 2, 2016 · pp. 6–12 Read article
-
Comparative Study of Dextrose Production from Locally Sourced Cassava, Tigernut and Yam
Abstract: Starch was extracted after sedimentation from seven samples, TME 419, TMS 30572, Provitamin, Tigernut, Boko, Mumuyi and Onitsha. The first three samples were cassava varieties while the last three samples were species of yam variety Dioscorea rotundata. The extracted starch were gelatinized and hydrolyzed enzymatically to produce 250ml of dextrose from each sample. From spectrometer analysis it showed that Mumuyi dextrose has the highest glucose concentration of 0.72mg/ml when compared …
Published in International Journal of Agrochemistry · Vol. 6, Issue 1, 2020 · pp. 1–24 Read article