Search
30 articles for “Alloy steel”
-
A Review on Steel Metallurgy
Abstract: Steel is mostly manufactured in the manufacturing industries and it is nearly ninety percent due to its extremely higher strength and high toughness. This review paper discusses on the classification of steels, steel as a potential engineering material, mechanical properties and fabrication properties of steels. It also explains on its applications, low alloy steels groups and its properties. This review article also discusses on special steels like micro alloyed steels, …
Published in International Journal of Manufacturing and Materials Processing · Vol. 10, Issue 1, 2024 · pp. 1–6 Read article
-
Optimization of Active Cutting Power Consumption by Taguchi Method for Rough Turning of Alloy Steel
Abstract: In this study, the active cutting power consumption (ACPC) is optimized as it is usually the major factor of the electricity bills in machining operations. The EN 353 alloy steel is used as workpiece material during rough turning while varying cutting parameters and nose_radius. The experiments were conducted in accordance with the Taguchi’s L-27 standard arrangement and the interactions between parameters were also considered with tungsten carbide inserts. The optimum …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 1, 2020 · pp. 37–45 Read article
-
Steel in Marine Weather
Abstract: Offshore structures of steel are reviewed after suitable application at onshore. Coat of stitch pad wet weld heat treat is subjected to improve the properties from high strength low alloy steel. Underwater welding with or without environment has modifications from the use of weld heat to heat treat, selection of electrodes containing silicates and polymer agglomerates to induce more heat of weld and penetration. Typical coat crack detect inswing from …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 1, 2021 · pp. 1–8 Read article
-
Electrodeposition of Bright Zn–Co–Fe Alloy Coatings on Mild Steel and Their Characterization
Abstract: Sulphate bath having ZnSO4. 7H2O, CoSO4. 7H2O, FeSO4.7H2O and thiamine hydrochloride (THC) and citric acid (CA) in combination, was optimized for deposition of bright Zn–Co–Fe alloy coating on mild steel. Bath constituents and operating parameters were optimized by Hull cell method, for highest corrosion performance against coating. The effect of current density on deposit characters viz., corrosion resistance, hardness, thickness, CCE were evaluated. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) …
Published in International Journal of Analytical and Applied Chemistry · Vol. 2, Issue 2, 2016 · pp. 17–25 Read article
-
Microstructure and Mechanical Behavior of Microalloyed Forging Steels
Abstract: The microalloyed (MA) forging steels have been developed over the past several decades and they are gradually employed in the high-performance applications in many structural, automotive, and numerous engineering applications. The principle of microalloying contents in the Fe–C alloy system, thereby preferably combined with different mechanical, heat treatment, and microalloying solubility control the precipitation behaviors that lead to enormous opportunities to develop a new generation of high strength low alloy …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 2, 2025 · pp. 1–14 Read article
-
Determination of the Flow Velocity Resistance in Non- Submerged Woody Plants
Abstract: Vegetation on the bank of a river or stream has a major influence on resistance, velocity distribution,and turbulence force. The resistance to flow in open channels depends on different channel and flow parameters. Out of many factors, vegetation is the mainly important parameter in open channels. In this study have been five points to measure the velocity in the channel. The experimental work has been done by a rectangular channel …
Published in International Journal of Environmental Chemistry · Vol. 8, Issue 1, 2022 · pp. 1–7 Read article
-
Experimental Analysis on the Characteristics of Gas Turbine Blade Materials
Abstract: Gas turbine technology is gaining importance and has become viable option in most of the applications in view of depleting fossil fuels. Material research has widened the scope and life of gas turbines with improved performance. Present work experimentally studies about the characteristics of different materials that can be used in gas turbines and in particular, turbine/compressor blades. Nickel, Titanium and steel alloys of different metal compositions are selected. Hardness …
Published in International Journal of Composite Materials and Matrices · Vol. 2, Issue 2, 2016 · pp. 19–23 Read article
-
Properties in Materials for Car Frame Structure
Abstract: Selection of materials for car body frame ‘the body-in-white’ considers association of structural components. This context emphasizes competitive materials like aluminum and composites in place of steel for equivalent performances in area body panels. Continuous variation in legislation and competences of industrialists to competitive market have appeared to use functionally graded materials of additive properties like thermal transport and joining ease. Tubular shapes have encouraged production of stiff commercial auto …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 2, 2019 · pp. 41–51 Read article
-
Recent Advances in the Development and Performance Optimization of Advanced Metallic Alloys
Abstract: The continuous demand for high-performance materials in aerospace, automotive, energy, and biomedical industries has accelerated research and development in advanced metallic alloys. Metallurgy and alloy design play a crucial role in achieving superior mechanical, thermal, and chemical properties while maintaining cost efficiency and sustainability. This study presents a comprehensive overview of recent advances in metallic alloy development, focusing on novel alloying strategies, microstructural control, and performance optimization techniques. Emphasis is …
Published in International Journal of Metallurgy and Alloys · Vol. 12, Issue 1, 2026 · pp. 1–6 Read article
-
Enhancing Machining Sustainability: ComparativeAnalysis of Dry, Minimum Quantity Lubrication, andCryogenic Cooling Methods
Abstract: AbstractSustainable machining is crucial for minimizing the environmental, economic, and social challengesassociated with modern manufacturing. This study reviews environmentally sustainable machiningapproaches including dry machining, Minimum Quantity Lubrication (MQL), and cryogenic cooling,and evaluates their effects on machining performance and sustainability. Key performance indicators,such as surface integrity, tool wear, energy efficiency and cutting forces, are analyzed across variousmaterials. The findings demonstrate that dry machining eliminates liquid waste but is often limited bytool …
Published in International Journal of Manufacturing and Materials Processing · Vol. 11, Issue 1, 2025 · pp. 1–7 Read article
-
Evaluation of Deformation Behavior of a Structural Pipe Bracket Under Static Loading Using Finite-Element Analysis
Abstract: This study presents a comprehensive structural integrity assessment and comparative static response analysis of an industrial support bracket subjected to varying mechanical loading conditions using the finite element method (FEM). Industrial brackets are essential load-bearing components in mechanical and structural systems, where adequate stiffness, strength, and dimensional stability are critical for ensuring operational reliability and structural safety. The primary objective of this investigation is to evaluate the influence of material …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 2, 2026 · pp. 1–12 Read article
-
Corrosion Inhibitors for Steel Appliances
Abstract: Inhibitors of corrosion in stainless steels are based on alloy developments. Effects of various alloy elements are to form passive film on surfaces under corrosive conditions. Tendency of passive film formation has rendered stainless steel to be applicable for any sector except bio-medical purposes. Line pipe of flow lines and gathering lines are suggested to use conventional carbon steel pipe with cost effective inhibitors. Duel phase stainless steels or improved …
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 1, 2019 · pp. 1–7 Read article
-
A Study on Stress Analysis of Aluminum Alloy Solidified in Metallic Molds
Abstract: Abstract The casting technique is regarded as the primary manufacturing process. It has several process parameters that affect the cast structure. Mold geometry is considered one of the most important metal parameters to cast. In the current work, the influence of mold geometries on mechanical properties (deformation and stress concentration) of liquid Aluminum alloy solidified in the steel mold is assessed using ANSYS simulation software. Molds were subject to a …
Published in International Journal of Manufacturing and Materials Processing · Vol. 10, Issue 2, 2024 · pp. 10–15 Read article
-
Exploring the Ettingshausen Effect: Magnetothermoelectric Transport in Graphene Nanoribbons and Iron-Carbon Alloys
Abstract: This study investigates the magnetothermoelectric effects, specifically the Ettingshausen effect, in graphene nanoribbons and iron-carbon alloys and explores their implications in plasma physics through self-similar modeling. The Ettingshausen effect, which involves the generation of a transverse heat current from a longitudinal charge current in the presence of a magnetic field, is analyzed using the Landauer-Büttiker formalism and nonequilibrium Green's function methods. Results reveal that in graphene nanoribbons, the Ettingshausen effect …
Published in International Journal of Energetic Materials · Vol. 10, Issue 1, 2024 · pp. 31–35 Read article
-
CORROSION RESISTANCE OF BINARY AND TERNARY ALLOY COATINGS FROM ACID SULPHATE BATH
Abstract: Electroplating of three binary (Zn-Ni, Zn-Co and Zn-Fe) and two ternary (Zn-Ni-Co and Zn-Co-Fe) alloy coatings were developed onto mild steel substrate using 2-((4-chlorophenyl) amino)-1-(6-methyl-1H-pyrazolo [3, 4 - b] quinolin-1-yl) ethanone (CME) as an additive. Hull cell technique was used to optimize the bath constituents and operating conditions. Corrosion rate of binary and ternary alloy coatings were determined using potentiodynamic polarization method. Corrosion rate of ternary Zn-Ni-Co alloy coating was …
Published in International Journal of Analytical and Applied Chemistry · Vol. 6, Issue 2, 2020 · pp. 12–16 Read article
-
Induced codeposition of Ni-W alloy coatings using glycerol as additive and their characterization
Abstract: As a promising coating material to replace hard chromium coating, the development of nickel–tungsten (Ni-W) alloy coatings of good corrosion protection is of great interest in surface coating technology. Further, the effect of plating variables, including additive on the composition of alloys of induced co-deposition is more vagarious than in other types of alloy deposition. In this regard, an alkaline citrate bath has been formulated for electrodeposition of Ni-W alloy …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 2, 2016 · pp. 1–9 Read article
-
Role and Applications of Alloys in Everyday Life
Abstract: An alloy is a mixture of metals or a mixture of a metal and another element. Alloys are defined by a metallic bonding character. An alloy may be a solid solution of metal elements (a single phase) or a mixture of metallic phases (two or more solutions). Melting point: Put the alloy, a piece of tin and a piece of lead into a sand tray. All three samples should be …
Published in International Journal of Metallurgy and Alloys · Vol. 3, Issue 1, 2017 · pp. 17–23 Read article
-
Green Corrosion Inhibitors for Mild Steel in Acidic Media-A Short Review of Literature
Abstract: Corrosion of metals and alloys is an inevitable phenomenon due to metal’s natural tendency to revertback to combined state to attain stability. The article focuses on briefly reviewing few of the greencorrosion inhibitors reported for mild steel in acidic media over last three years. The measurementmethods for evaluation of corrosion rates practically and theoretically are mentioned in the article.The mode of adsorption of the inhibitors and the proposed adsorption isotherm …
Published in International Journal of Green Chemistry · Vol. 7, Issue 1, 2021 · pp. 27–30 Read article
-
Electrolytic Deposition of Zn–Ni Alloy from Acidic Sulphate Bath and Their Characterization
Abstract: A bath containing ZnSO4.7H2O, NiSO4.7H2O, thiamine hydrochloride (THC) and citric acid (CA) has been proposed. Bright Zn–Ni alloy coatings were developed galvanostatically onto mild steel (MS) and their corrosion resistance and other physical properties were studied. THC was found to improve the brightness and homogeneity of the deposit. The dependency of bath composition, current density (c.d.), pH and temperature, agitation on wt.% Ni were tested. Deposition was carried out under …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 2, 2016 · pp. 19–32 Read article
-
Service temperature attenuated materials
Abstract: Service temperatures in engineering materials have been one of important factors. It alone has not been only controlling variable for creep properties. Useful services from useful materials therefore have been more important within temperature ranges stipulated for certain services. Temperature ranges of interest to materials engineer have been ranged from cryogenic regions (- 200oC) to temperature of a tungsten-filament lamp (2000oC). This article has been description of materials from room …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 2, 2019 · pp. 37–45 Read article